diff --git a/cores/arduino/Makefile b/cores/arduino/Makefile deleted file mode 100755 index 0882f67..0000000 --- a/cores/arduino/Makefile +++ /dev/null @@ -1,243 +0,0 @@ -# Arduino Makefile -# Arduino adaptation by mellis, eighthave, oli.keller -# -# This makefile allows you to build sketches from the command line -# without the Arduino environment (or Java). -# -# Detailed instructions for using the makefile: -# -# 1. Copy this file into the folder with your sketch. There should be a -# file with the same name as the folder and with the extension .pde -# (e.g. foo.pde in the foo/ folder). -# -# 2. Modify the line containg "INSTALL_DIR" to point to the directory that -# contains the Arduino installation (for example, under Mac OS X, this -# might be /Applications/arduino-0012). -# -# 3. Modify the line containing "PORT" to refer to the filename -# representing the USB or serial connection to your Arduino board -# (e.g. PORT = /dev/tty.USB0). If the exact name of this file -# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*). -# -# 4. Set the line containing "MCU" to match your board's processor. -# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth -# or Diecimila have the atmega168. If you're using a LilyPad Arduino, -# change F_CPU to 8000000. -# -# 5. At the command line, change to the directory containing your -# program's file and the makefile. -# -# 6. Type "make" and press enter to compile/verify your program. -# -# 7. Type "make upload", reset your Arduino board, and press enter to -# upload your program to the Arduino board. -# -# $Id$ - -TARGET = $(notdir $(CURDIR)) -INSTALL_DIR = ../../.. -PORT = /dev/tty.usb* -UPLOAD_RATE = 19200 -AVRDUDE_PROGRAMMER = stk500v1 -MCU = atmega168 -F_CPU = 16000000 - -############################################################################ -# Below here nothing should be changed... - -ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino -AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin -SRC = $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \ -$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \ -$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_shift.c \ -$(ARDUINO)/WInterrupts.c -CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \ -$(ARDUINO)/Print.cpp -FORMAT = ihex - - -# Name of this Makefile (used for "make depend"). -MAKEFILE = Makefile - -# Debugging format. -# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2. -# AVR (extended) COFF requires stabs, plus an avr-objcopy run. -DEBUG = stabs - -OPT = s - -# Place -D or -U options here -CDEFS = -DF_CPU=$(F_CPU) -CXXDEFS = -DF_CPU=$(F_CPU) - -# Place -I options here -CINCS = -I$(ARDUINO) -CXXINCS = -I$(ARDUINO) - -# Compiler flag to set the C Standard level. -# c89 - "ANSI" C -# gnu89 - c89 plus GCC extensions -# c99 - ISO C99 standard (not yet fully implemented) -# gnu99 - c99 plus GCC extensions -CSTANDARD = -std=gnu99 -CDEBUG = -g$(DEBUG) -CWARN = -Wall -Wstrict-prototypes -CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -#CEXTRA = -Wa,-adhlns=$(<:.c=.lst) - -CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA) -CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs -LDFLAGS = -lm - - -# Programming support using avrdude. Settings and variables. -AVRDUDE_PORT = $(PORT) -AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex -AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \ --p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \ --b $(UPLOAD_RATE) - -# Program settings -CC = $(AVR_TOOLS_PATH)/avr-gcc -CXX = $(AVR_TOOLS_PATH)/avr-g++ -OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy -OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump -AR = $(AVR_TOOLS_PATH)/avr-ar -SIZE = $(AVR_TOOLS_PATH)/avr-size -NM = $(AVR_TOOLS_PATH)/avr-nm -AVRDUDE = $(AVR_TOOLS_PATH)/avrdude -REMOVE = rm -f -MV = mv -f - -# Define all object files. -OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) - -# Define all listing files. -LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst) - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) -ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - -# Default target. -all: applet_files build sizeafter - -build: elf hex - -applet_files: $(TARGET).pde - # Here is the "preprocessing". - # It creates a .cpp file based with the same name as the .pde file. - # On top of the new .cpp file comes the WProgram.h header. - # At the end there is a generic main() function attached. - # Then the .cpp file will be compiled. Errors during compile will - # refer to this new, automatically generated, file. - # Not the original .pde file you actually edit... - test -d applet || mkdir applet - echo '#include "WProgram.h"' > applet/$(TARGET).cpp - cat $(TARGET).pde >> applet/$(TARGET).cpp - cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp - -elf: applet/$(TARGET).elf -hex: applet/$(TARGET).hex -eep: applet/$(TARGET).eep -lss: applet/$(TARGET).lss -sym: applet/$(TARGET).sym - -# Program the device. -upload: applet/$(TARGET).hex - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) - - - # Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex -ELFSIZE = $(SIZE) applet/$(TARGET).elf -sizebefore: - @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi - -sizeafter: - @if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT=$(OBJCOPY) --debugging \ ---change-section-address .data-0x800000 \ ---change-section-address .bss-0x800000 \ ---change-section-address .noinit-0x800000 \ ---change-section-address .eeprom-0x810000 - - -coff: applet/$(TARGET).elf - $(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof - - -extcoff: $(TARGET).elf - $(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof - - -.SUFFIXES: .elf .hex .eep .lss .sym - -.elf.hex: - $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@ - -.elf.eep: - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 -O $(FORMAT) $< $@ - -# Create extended listing file from ELF output file. -.elf.lss: - $(OBJDUMP) -h -S $< > $@ - -# Create a symbol table from ELF output file. -.elf.sym: - $(NM) -n $< > $@ - - # Link: create ELF output file from library. -applet/$(TARGET).elf: $(TARGET).pde applet/core.a - $(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS) - -applet/core.a: $(OBJ) - @for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done - - - -# Compile: create object files from C++ source files. -.cpp.o: - $(CXX) -c $(ALL_CXXFLAGS) $< -o $@ - -# Compile: create object files from C source files. -.c.o: - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -.c.s: - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -.S.o: - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Automatic dependencies -%.d: %.c - $(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - -%.d: %.cpp - $(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@ - - -# Target: clean project. -clean: - $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \ - applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \ - $(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d) - -.PHONY: all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter - --include $(SRC:.c=.d) --include $(CXXSRC:.cpp=.d)