From a3e2e68e2b7edb9f5434734bed4001df1e65451c Mon Sep 17 00:00:00 2001 From: Fede85 Date: Fri, 6 Sep 2013 15:38:07 +0200 Subject: [PATCH] Bridge library to the 1.5 format --- libraries/Bridge/Bridge.cpp | 229 --------- libraries/Bridge/Bridge.h | 97 ---- libraries/Bridge/Console.cpp | 153 ------ libraries/Bridge/Console.h | 69 --- libraries/Bridge/FileIO.cpp | 250 ---------- libraries/Bridge/FileIO.h | 103 ---- libraries/Bridge/HttpClient.cpp | 53 --- libraries/Bridge/HttpClient.h | 36 -- libraries/Bridge/Mailbox.cpp | 56 --- libraries/Bridge/Mailbox.h | 53 --- libraries/Bridge/Process.cpp | 142 ------ libraries/Bridge/Process.h | 69 --- libraries/Bridge/YunClient.cpp | 167 ------- libraries/Bridge/YunClient.h | 68 --- libraries/Bridge/YunServer.cpp | 54 --- libraries/Bridge/YunServer.h | 47 -- libraries/Bridge/examples/Bridge/Bridge.ino | 175 ------- .../ConsoleAsciiTable/ConsoleAsciiTable.ino | 94 ---- .../examples/ConsolePixel/ConsolePixel.ino | 62 --- .../examples/ConsoleRead/ConsoleRead.ino | 56 --- .../Bridge/examples/Datalogger/Datalogger.ino | 99 ---- .../FileWriteScript/FileWriteScript.ino | 82 ---- .../Bridge/examples/HttpClient/HttpClient.ino | 26 - libraries/Bridge/examples/Process/Process.ino | 70 --- .../examples/ShellCommands/ShellCommands.ino | 53 --- .../SpacebrewYun/inputOutput/inputOutput.ino | 130 ----- .../spacebrewBoolean/spacebrewBoolean.ino | 89 ---- .../spacebrewRange/spacebrewRange.ino | 86 ---- .../spacebrewString/spacebrewString.ino | 84 ---- .../Temboo/ControlBySMS/ControlBySMS.ino | 443 ------------------ .../Temboo/ControlBySMS/TembooAccount.h | 5 - .../GetYahooWeatherReport.ino | 115 ----- .../GetYahooWeatherReport/TembooAccount.h | 4 - .../examples/Temboo/ReadATweet/ReadATweet.ino | 173 ------- .../Temboo/ReadATweet/TembooAccount.h | 4 - .../examples/Temboo/SendATweet/SendATweet.ino | 138 ------ .../Temboo/SendATweet/TembooAccount.h | 4 - .../Temboo/SendAnEmail/SendAnEmail.ino | 137 ------ .../Temboo/SendAnEmail/TembooAccount.h | 4 - .../examples/Temboo/SendAnSMS/SendAnSMS.ino | 154 ------ .../examples/Temboo/SendAnSMS/TembooAccount.h | 5 - .../SendDataToGoogleSpreadsheet.ino | 178 ------- .../TembooAccount.h | 5 - .../ToxicFacilitiesSearch/TembooAccount.h | 5 - .../ToxicFacilitiesSearch.ino | 171 ------- .../UpdateFacebookStatus/TembooAccount.h | 5 - .../UpdateFacebookStatus.ino | 132 ------ .../Temboo/UploadToDropbox/TembooAccount.h | 5 - .../UploadToDropbox/UploadToDropbox.ino | 208 -------- .../TemperatureWebPanel.ino | 121 ----- .../TemperatureWebPanel/www/index.html | 16 - .../TemperatureWebPanel/www/zepto.min.js | 2 - .../Bridge/examples/TimeCheck/TimeCheck.ino | 82 ---- .../Bridge/examples/WiFiStatus/WiFiStatus.ino | 50 -- .../examples/XivelyClient/XivelyClient.ino | 110 ----- .../YunSerialTerminal/YunSerialTerminal.ino | 78 --- libraries/Bridge/keywords.txt | 85 ---- 57 files changed, 5191 deletions(-) delete mode 100644 libraries/Bridge/Bridge.cpp delete mode 100644 libraries/Bridge/Bridge.h delete mode 100644 libraries/Bridge/Console.cpp delete mode 100644 libraries/Bridge/Console.h delete mode 100644 libraries/Bridge/FileIO.cpp delete mode 100644 libraries/Bridge/FileIO.h delete mode 100644 libraries/Bridge/HttpClient.cpp delete mode 100644 libraries/Bridge/HttpClient.h delete mode 100644 libraries/Bridge/Mailbox.cpp delete mode 100644 libraries/Bridge/Mailbox.h delete mode 100644 libraries/Bridge/Process.cpp delete mode 100644 libraries/Bridge/Process.h delete mode 100644 libraries/Bridge/YunClient.cpp delete mode 100644 libraries/Bridge/YunClient.h delete mode 100644 libraries/Bridge/YunServer.cpp delete mode 100644 libraries/Bridge/YunServer.h delete mode 100644 libraries/Bridge/examples/Bridge/Bridge.ino delete mode 100644 libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino delete mode 100644 libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino delete mode 100644 libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino delete mode 100644 libraries/Bridge/examples/Datalogger/Datalogger.ino delete mode 100644 libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino delete mode 100644 libraries/Bridge/examples/HttpClient/HttpClient.ino delete mode 100644 libraries/Bridge/examples/Process/Process.ino delete mode 100644 libraries/Bridge/examples/ShellCommands/ShellCommands.ino delete mode 100644 libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino delete mode 100644 libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino delete mode 100644 libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino delete mode 100644 libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino delete mode 100644 libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino delete mode 100644 libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino delete mode 100644 libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino delete mode 100644 libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino delete mode 100644 libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino delete mode 100644 libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino delete mode 100644 libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino delete mode 100644 libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino delete mode 100644 libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino delete mode 100644 libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h delete mode 100644 libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino delete mode 100644 libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino delete mode 100755 libraries/Bridge/examples/TemperatureWebPanel/www/index.html delete mode 100755 libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js delete mode 100644 libraries/Bridge/examples/TimeCheck/TimeCheck.ino delete mode 100644 libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino delete mode 100644 libraries/Bridge/examples/XivelyClient/XivelyClient.ino delete mode 100644 libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino delete mode 100644 libraries/Bridge/keywords.txt diff --git a/libraries/Bridge/Bridge.cpp b/libraries/Bridge/Bridge.cpp deleted file mode 100644 index a3d911f..0000000 --- a/libraries/Bridge/Bridge.cpp +++ /dev/null @@ -1,229 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "Bridge.h" -#include - -BridgeClass::BridgeClass(Stream &_stream) : - index(0), stream(_stream), started(false), max_retries(0) { - // Empty -} - -void BridgeClass::begin() { - if (started) - return; - started = true; - - // Wait for U-boot to finish startup - do { - dropAll(); - delay(1000); - } while (stream.available()>0); - - while (true) { - // Bridge interrupt: - // - Ask the bridge to close itself - uint8_t quit_cmd[] = {'X','X','X','X','X'}; - max_retries = 1; - transfer(quit_cmd, 5); - - // Bridge startup: - // - If the bridge is not running starts it safely - stream.print(CTRL_C); - delay(250); - stream.print(F("\n")); - delay(250); - stream.print(F("\n")); - delay(500); - // Wait for OpenWRT message - // "Press enter to activate console" - stream.print(F("run-bridge\n")); - delay(500); - dropAll(); - - // Reset the brigde to check if it is running - uint8_t cmd[] = {'X','X', '1','0','0'}; - uint8_t res[1]; - max_retries = 50; - uint16_t l = transfer(cmd, 5, res, 1); - if (l == TRANSFER_TIMEOUT) { - // Bridge didn't start... - // Maybe the board is starting-up? - - // Wait and retry - delay(1000); - continue; - } - if (res[0] != 0) - while (true); - - max_retries = 50; - return; - } -} - -void BridgeClass::put(const char *key, const char *value) { - // TODO: do it in a more efficient way - String cmd = "D"; - cmd += key; - cmd += "\xFE"; - cmd += value; - transfer((uint8_t*)cmd.c_str(), cmd.length()); -} - -unsigned int BridgeClass::get(const char *key, uint8_t *value, unsigned int maxlen) { - uint8_t cmd[] = {'d'}; - unsigned int l = transfer(cmd, 1, (uint8_t *)key, strlen(key), value, maxlen); - if (l < maxlen) - value[l] = 0; // Zero-terminate string - return l; -} - -void BridgeClass::crcUpdate(uint8_t c) { - - CRC = _crc_ccitt_update(CRC, c); - //CRC = CRC ^ c; - //CRC = (CRC >> 8) + (CRC << 8); -} - -void BridgeClass::crcReset() { - CRC = 0xFFFF; -} - -void BridgeClass::crcWrite() { - stream.write((char)(CRC >> 8)); - stream.write((char)(CRC & 0xFF)); -} - -bool BridgeClass::crcCheck(uint16_t _CRC) { - return CRC == _CRC; -} - -uint16_t BridgeClass::transfer(const uint8_t *buff1, uint16_t len1, - const uint8_t *buff2, uint16_t len2, - const uint8_t *buff3, uint16_t len3, - uint8_t *rxbuff, uint16_t rxlen) -{ - uint16_t len = len1 + len2 + len3; - uint8_t retries = 0; - for ( ; retries> 8) & 0xFF)); // Message length (hi) - crcUpdate((len >> 8) & 0xFF); - stream.write((char)(len & 0xFF)); // Message length (lo) - crcUpdate(len & 0xFF); - for (uint16_t i=0; i rxlen) - return rxlen; - return l; - } - - // Max retries exceeded - return TRANSFER_TIMEOUT; -} - -int BridgeClass::timedRead(unsigned int timeout) { - int c; - unsigned long _startMillis = millis(); - do { - c = stream.read(); - if (c >= 0) return c; - } while(millis() - _startMillis < timeout); - return -1; // -1 indicates timeout -} - -void BridgeClass::dropAll() { - while (stream.available() > 0) { - stream.read(); - } -} - -// Bridge instance -#ifdef __AVR_ATmega32U4__ - // Leonardo variants (where HardwareSerial is Serial1) - SerialBridgeClass Bridge(Serial1); -#else - SerialBridgeClass Bridge(Serial); -#endif diff --git a/libraries/Bridge/Bridge.h b/libraries/Bridge/Bridge.h deleted file mode 100644 index e4ed9f8..0000000 --- a/libraries/Bridge/Bridge.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef BRIDGE_H_ -#define BRIDGE_H_ - -#include -#include - -class BridgeClass { -public: - BridgeClass(Stream &_stream); - void begin(); - - // Methods to handle key/value datastore - void put(const char *key, const char *value); - void put(const String &key, const String &value) - { put(key.c_str(), value.c_str()); } - unsigned int get(const char *key, uint8_t *buff, unsigned int size); - unsigned int get(const char *key, char *value, unsigned int maxlen) - { get(key, reinterpret_cast(value), maxlen); } - - // Trasnfer a frame (with error correction and response) - uint16_t transfer(const uint8_t *buff1, uint16_t len1, - const uint8_t *buff2, uint16_t len2, - const uint8_t *buff3, uint16_t len3, - uint8_t *rxbuff, uint16_t rxlen); - // multiple inline versions of the same function to allow efficient frame concatenation - uint16_t transfer(const uint8_t *buff1, uint16_t len1) - { return transfer(buff1, len1, NULL, 0); } - uint16_t transfer(const uint8_t *buff1, uint16_t len1, - uint8_t *rxbuff, uint16_t rxlen) - { return transfer(buff1, len1, NULL, 0, rxbuff, rxlen); } - uint16_t transfer(const uint8_t *buff1, uint16_t len1, - const uint8_t *buff2, uint16_t len2, - uint8_t *rxbuff, uint16_t rxlen) - { return transfer(buff1, len1, buff2, len2, NULL, 0, rxbuff, rxlen); } - - static const int TRANSFER_TIMEOUT = 0xFFFF; - -private: - uint8_t index; - int timedRead(unsigned int timeout); - void dropAll(); - -private: - void crcUpdate(uint8_t c); - void crcReset(); - void crcWrite(); - bool crcCheck(uint16_t _CRC); - uint16_t CRC; - -private: - static const char CTRL_C = 3; - Stream &stream; - bool started; - uint8_t max_retries; -}; - -// This subclass uses a serial port Stream -class SerialBridgeClass : public BridgeClass { -public: - SerialBridgeClass(HardwareSerial &_serial) - : BridgeClass(_serial), serial(_serial) { - // Empty - } - - void begin() { - serial.begin(250000); - BridgeClass::begin(); - } - -private: - HardwareSerial &serial; -}; - -extern SerialBridgeClass Bridge; - -#endif /* BRIDGE_H_ */ - -#include -#include diff --git a/libraries/Bridge/Console.cpp b/libraries/Bridge/Console.cpp deleted file mode 100644 index 8607421..0000000 --- a/libraries/Bridge/Console.cpp +++ /dev/null @@ -1,153 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include - -// Default constructor uses global Bridge instance -ConsoleClass::ConsoleClass() : - bridge(Bridge), inBuffered(0), inReadPos(0), inBuffer(NULL), - autoFlush(true) -{ - // Empty -} - -// Constructor with a user provided BridgeClass instance -ConsoleClass::ConsoleClass(BridgeClass &_b) : - bridge(_b), inBuffered(0), inReadPos(0), inBuffer(NULL), - autoFlush(true) -{ - // Empty -} - -ConsoleClass::~ConsoleClass() { - end(); -} - -size_t ConsoleClass::write(uint8_t c) { - if (autoFlush) { - uint8_t tmp[] = { 'P', c }; - bridge.transfer(tmp, 2); - return 1; - } else { - outBuffer[outBuffered++] = c; - if (outBuffered == outBufferSize) - flush(); - } -} - -size_t ConsoleClass::write(const uint8_t *buff, size_t size) { - if (autoFlush) { - // TODO: do it in a more efficient way - uint8_t *tmp = new uint8_t[size+1]; - tmp[0] = 'P'; - memcpy(tmp+1, buff, size); - bridge.transfer(tmp, size+1); - delete[] tmp; - return size; - } else { - while (size > 0) { - outBuffer[outBuffered++] = *buff++; - size--; - if (outBuffered == outBufferSize) - flush(); - } - } -} - -void ConsoleClass::flush() { - if (autoFlush) - return; - - bridge.transfer(outBuffer, outBuffered); - outBuffered = 1; -} - -void ConsoleClass::noBuffer() { - if (autoFlush) - return; - delete[] outBuffer; - autoFlush = true; -} - -void ConsoleClass::buffer(uint8_t size) { - noBuffer(); - if (size==0) - return; - outBuffer = new uint8_t[size+1]; - outBuffer[0] = 'P'; // WRITE tag - outBufferSize = size+1; - outBuffered = 1; - autoFlush = false; -} - -bool ConsoleClass::connected() { - uint8_t tmp = 'a'; - bridge.transfer(&tmp, 1, &tmp, 1); - return tmp==1; -} - -int ConsoleClass::available() { - // Look if there is new data available - doBuffer(); - return inBuffered; -} - -int ConsoleClass::read() { - doBuffer(); - if (inBuffered == 0) - return -1; // no chars available - else { - inBuffered--; - return inBuffer[inReadPos++]; - } -} - -int ConsoleClass::peek() { - doBuffer(); - if (inBuffered == 0) - return -1; // no chars available - else - return inBuffer[inReadPos]; -} - -void ConsoleClass::doBuffer() { - // If there are already char in buffer exit - if (inBuffered > 0) - return; - - // Try to buffer up to 32 characters - inReadPos = 0; - uint8_t tmp[] = { 'p', BUFFER_SIZE }; - inBuffered = bridge.transfer(tmp, 2, inBuffer, BUFFER_SIZE); -} - -void ConsoleClass::begin() { - bridge.begin(); - end(); - inBuffer = new uint8_t[BUFFER_SIZE]; -} - -void ConsoleClass::end() { - noBuffer(); - if (inBuffer) { - delete[] inBuffer; - inBuffer = NULL; - } -} - -ConsoleClass Console; diff --git a/libraries/Bridge/Console.h b/libraries/Bridge/Console.h deleted file mode 100644 index 73a9739..0000000 --- a/libraries/Bridge/Console.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef CONSOLE_H_ -#define CONSOLE_H_ - -#include - -class ConsoleClass : public Stream { -public: - // Default constructor uses global Bridge instance - ConsoleClass(); - // Constructor with a user provided BridgeClass instance - ConsoleClass(BridgeClass &_b); - ~ConsoleClass(); - - void begin(); - void end(); - - void buffer(uint8_t size); - void noBuffer(); - - bool connected(); - - // Stream methods - // (read from console socket) - int available(); - int read(); - int peek(); - // (write to console socket) - size_t write(uint8_t); - size_t write(const uint8_t *buffer, size_t size); - void flush(); - - operator bool () { return connected(); } - -private: - BridgeClass &bridge; - - void doBuffer(); - uint8_t inBuffered; - uint8_t inReadPos; - static const int BUFFER_SIZE = 32; - uint8_t *inBuffer; - - bool autoFlush; - uint8_t outBuffered; - uint8_t outBufferSize; - uint8_t *outBuffer; -}; - -extern ConsoleClass Console; - -#endif diff --git a/libraries/Bridge/FileIO.cpp b/libraries/Bridge/FileIO.cpp deleted file mode 100644 index 83c889e..0000000 --- a/libraries/Bridge/FileIO.cpp +++ /dev/null @@ -1,250 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include - - - -File::File(BridgeClass &b) : mode(255), bridge(b) { - // Empty -} - -File::File(const char *_filename, uint8_t _mode, BridgeClass &b) : mode(_mode), bridge(b) { - filename = _filename; - char modes[] = {'r','w','a'}; - uint8_t cmd[] = {'F', modes[mode]}; - uint8_t res[2]; - dirPosition = 1; - bridge.transfer(cmd, 2, (uint8_t*)filename.c_str(), filename.length(), res, 2); - if (res[0] != 0) { // res[0] contains error code - mode = 255; // In case of error keep the file closed - return; - } - handle = res[1]; - buffered = 0; -} - -File::operator bool() { - return (mode != 255); -} - -File::~File() { - close(); -} - -size_t File::write(uint8_t c) { - return write(&c, 1); -} - -size_t File::write(const uint8_t *buf, size_t size) { - if (mode == 255) - return -1; - uint8_t cmd[] = {'g', handle}; - uint8_t res[1]; - bridge.transfer(cmd, 2, buf, size, res, 1); - if (res[0] != 0) // res[0] contains error code - return -res[0]; - return size; -} - -int File::read() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else { - buffered--; - return buffer[readPos++]; - } -} - -int File::peek() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else - return buffer[readPos]; -} - -boolean File::seek(uint32_t position) { - uint8_t cmd[] = { - 's', - handle, - (position >> 24) & 0xFF, - (position >> 16) & 0xFF, - (position >> 8) & 0xFF, - position & 0xFF - }; - uint8_t res[1]; - bridge.transfer(cmd, 6, res, 1); - if (res[0]==0) { - // If seek succeed then flush buffers - buffered = 0; - return true; - } - return false; -} - -uint32_t File::position() { - uint8_t cmd[] = {'S', handle}; - uint8_t res[5]; - bridge.transfer(cmd, 2, res, 5); - //err = res[0]; // res[0] contains error code - uint32_t pos = res[1] << 24; - pos += res[2] << 16; - pos += res[3] << 8; - pos += res[4]; - return pos - buffered; -} - -void File::doBuffer() { - // If there are already char in buffer exit - if (buffered > 0) - return; - - // Try to buffer up to 32 characters - readPos = 0; - uint8_t cmd[] = {'G', handle, sizeof(buffer)}; - buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)) - 1; - //err = buff[0]; // First byte is error code - if (buffered>0) { - // Shift the reminder of buffer - for (uint8_t i=0; i - -#define FILE_READ 0 -#define FILE_WRITE 1 -#define FILE_APPEND 2 - -class File : public Stream { - -public: - File(BridgeClass &b = Bridge); - File(const char *_filename, uint8_t _mode, BridgeClass &b = Bridge); - ~File(); - - virtual size_t write(uint8_t); - virtual size_t write(const uint8_t *buf, size_t size); - virtual int read(); - virtual int peek(); - virtual int available(); - virtual void flush(); - int read(void *buf, uint16_t nbyte); - boolean seek(uint32_t pos); - uint32_t position(); - uint32_t size(); - void close(); - operator bool(); - const char * name(); - boolean isDirectory(); - File openNextFile(uint8_t mode = FILE_READ); - void rewindDirectory(void); - - //using Print::write; - -private: - void doBuffer(); - uint8_t buffered; - uint8_t readPos; - uint16_t dirPosition; - static const int BUFFER_SIZE = 64; - uint8_t buffer[BUFFER_SIZE]; - - -private: - BridgeClass &bridge; - String filename; - uint8_t mode; - uint8_t handle; - -}; - -class FileSystemClass { -public: - FileSystemClass() : bridge(Bridge) { } - FileSystemClass(BridgeClass &_b) : bridge(_b) { } - - boolean begin(); - - // Open the specified file/directory with the supplied mode (e.g. read or - // write, etc). Returns a File object for interacting with the file. - // Note that currently only one file can be open at a time. - File open(const char *filename, uint8_t mode = FILE_READ); - - // Methods to determine if the requested file path exists. - boolean exists(const char *filepath); - - // Create the requested directory heirarchy--if intermediate directories - // do not exist they will be created. - boolean mkdir(const char *filepath); - - // Delete the file. - boolean remove(const char *filepath); - - boolean rmdir(const char *filepath); - -private: - friend class File; - - BridgeClass &bridge; -}; - -extern FileSystemClass FileSystem; - -#endif diff --git a/libraries/Bridge/HttpClient.cpp b/libraries/Bridge/HttpClient.cpp deleted file mode 100644 index 510af38..0000000 --- a/libraries/Bridge/HttpClient.cpp +++ /dev/null @@ -1,53 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include "HttpClient.h" - -unsigned int HttpClient::get(String &url) { - begin("curl"); - addParameter(url); - return run(); -} - -unsigned int HttpClient::get(const char *url) { - begin("curl"); - addParameter(url); - return run(); -} - -void HttpClient::getAsynchronously(String &url) { - begin("curl"); - addParameter(url); - runAsynchronously(); -} - -void HttpClient::getAsynchronously(const char *url) { - begin("curl"); - addParameter(url); - runAsynchronously(); -} - -boolean HttpClient::ready() { - return running(); -} - -unsigned int HttpClient::getResult() { - return exitValue(); -} - - diff --git a/libraries/Bridge/HttpClient.h b/libraries/Bridge/HttpClient.h deleted file mode 100644 index 940a66d..0000000 --- a/libraries/Bridge/HttpClient.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef HTTPCLIENT_H_ -#define HTTPCLIENT_H_ - -#include - -class HttpClient : public Process { -public: - - unsigned int get(String &url); - unsigned int get(const char * url); - void getAsynchronously(String &url); - void getAsynchronously(const char * url); - boolean ready(); - unsigned int getResult(); - -}; - -#endif /* HTTPCLIENT_H_ */ diff --git a/libraries/Bridge/Mailbox.cpp b/libraries/Bridge/Mailbox.cpp deleted file mode 100644 index cf2b9e5..0000000 --- a/libraries/Bridge/Mailbox.cpp +++ /dev/null @@ -1,56 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include - -unsigned int MailboxClass::readMessage(uint8_t *buff, unsigned int size) { - uint8_t tmp[] = { 'm' }; - return bridge.transfer(tmp, 1, buff, size); -} - -void MailboxClass::readMessage(String &str, unsigned int maxLength) { - uint8_t tmp[] = { 'm' }; - // XXX: Is there a better way to create the string? - uint8_t buff[maxLength+1]; - int l = bridge.transfer(tmp, 1, buff, maxLength); - buff[l] = 0; - str = (const char *)buff; -} - -void MailboxClass::writeMessage(const uint8_t *buff, unsigned int size) { - uint8_t cmd[] = {'M'}; - bridge.transfer(cmd, 1, buff, size, NULL, 0); -} - -void MailboxClass::writeMessage(const String& str) { - writeMessage((uint8_t*) str.c_str(), str.length()); -} - -void MailboxClass::writeJSON(const String& str) { - uint8_t cmd[] = {'J'}; - bridge.transfer(cmd, 1, (uint8_t*) str.c_str(), str.length(), NULL, 0); -} - -unsigned int MailboxClass::messageAvailable() { - uint8_t tmp[] = {'n'}; - uint8_t res[2]; - bridge.transfer(tmp, 1, res, 2); - return (res[0] << 8) + res[1]; -} - -MailboxClass Mailbox(Bridge); diff --git a/libraries/Bridge/Mailbox.h b/libraries/Bridge/Mailbox.h deleted file mode 100644 index 35bd1d6..0000000 --- a/libraries/Bridge/Mailbox.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _MAILBOX_CLASS_H_INCLUDED_ -#define _MAILBOX_CLASS_H_INCLUDED_ - -#include - -class MailboxClass { -public: - MailboxClass(BridgeClass &b = Bridge) : bridge(b) { } - - void begin() { } - void end() { } - - // Receive a message and store it inside a buffer - unsigned int readMessage(uint8_t *buffer, unsigned int size); - // Receive a message and store it inside a String - void readMessage(String &str, unsigned int maxLength=128); - - // Send a message - void writeMessage(const uint8_t *buffer, unsigned int size); - // Send a message - void writeMessage(const String& str); - // Send a JSON message - void writeJSON(const String& str); - - // Return the size of the next available message, 0 if there are - // no messages in queue. - unsigned int messageAvailable(); - -private: - BridgeClass &bridge; -}; - -extern MailboxClass Mailbox; - -#endif // _MAILBOX_CLASS_H_INCLUDED_ diff --git a/libraries/Bridge/Process.cpp b/libraries/Bridge/Process.cpp deleted file mode 100644 index 219922a..0000000 --- a/libraries/Bridge/Process.cpp +++ /dev/null @@ -1,142 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include - -Process::~Process() { - close(); -} - -size_t Process::write(uint8_t c) { - uint8_t cmd[] = {'I', handle, c}; - bridge.transfer(cmd, 3); - return 1; -} - -void Process::flush() { -} - -int Process::available() { - // Look if there is new data available - doBuffer(); - return buffered; -} - -int Process::read() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else { - buffered--; - return buffer[readPos++]; - } -} - -int Process::peek() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else - return buffer[readPos]; -} - -void Process::doBuffer() { - // If there are already char in buffer exit - if (buffered > 0) - return; - - // Try to buffer up to 32 characters - readPos = 0; - uint8_t cmd[] = {'O', handle, sizeof(buffer)}; - buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)); -} - -void Process::begin(const String &command) { - close(); - cmdline = new String(command); -} - -void Process::addParameter(const String ¶m) { - *cmdline += "\xFE"; - *cmdline += param; -} - -void Process::runAsynchronously() { - uint8_t cmd[] = {'R'}; - uint8_t res[2]; - bridge.transfer(cmd, 1, (uint8_t*)cmdline->c_str(), cmdline->length(), res, 2); - handle = res[1]; - - delete cmdline; - cmdline = NULL; - - if (res[0]==0) // res[0] contains error code - started = true; -} - -boolean Process::running() { - uint8_t cmd[] = {'r', handle}; - uint8_t res[1]; - bridge.transfer(cmd, 2, res, 1); - return (res[0] == 1); -} - -unsigned int Process::exitValue() { - uint8_t cmd[] = {'W', handle}; - uint8_t res[2]; - bridge.transfer(cmd, 2, res, 2); - return (res[0] << 8) + res[1]; -} - -unsigned int Process::run() { - runAsynchronously(); - while (running()) - delay(100); - return exitValue(); -} - -void Process::close() { - if (started) { - uint8_t cmd[] = {'w', handle}; - bridge.transfer(cmd, 2); - } - started = false; -} - -unsigned int Process::runShellCommand(const String &command) { - runShellCommandAsynchronously(command); - while (running()) - delay(100); - return exitValue(); -} - -void Process::runShellCommandAsynchronously(const String &command) { - begin("/bin/ash"); - addParameter("-c"); - addParameter(command); - runAsynchronously(); -} - -// This method is currently unused -//static unsigned int __commandOutputAvailable(uint8_t handle) { -// uint8_t cmd[] = {'o', handle}; -// uint8_t res[1]; -// Bridge.transfer(cmd, 2, res, 1); -// return res[0]; -//} - diff --git a/libraries/Bridge/Process.h b/libraries/Bridge/Process.h deleted file mode 100644 index cacf516..0000000 --- a/libraries/Bridge/Process.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef PROCESS_H_ -#define PROCESS_H_ - -#include - -class Process : public Stream { -public: - // Constructor with a user provided BridgeClass instance - Process(BridgeClass &_b = Bridge) : - bridge(_b), started(false), buffered(0), readPos(0) { } - ~Process(); - - void begin(const String &command); - void addParameter(const String ¶m); - unsigned int run(); - void runAsynchronously(); - boolean running(); - unsigned int exitValue(); - void close(); - - unsigned int runShellCommand(const String &command); - void runShellCommandAsynchronously(const String &command); - - operator bool () { return started; } - - // Stream methods - // (read from process stdout) - int available(); - int read(); - int peek(); - // (write to process stdin) - size_t write(uint8_t); - void flush(); - // TODO: add optimized function for block write - -private: - BridgeClass &bridge; - unsigned int handle; - String *cmdline; - boolean started; - -private: - void doBuffer(); - uint8_t buffered; - uint8_t readPos; - static const int BUFFER_SIZE = 64; - uint8_t buffer[BUFFER_SIZE]; - -}; - -#endif diff --git a/libraries/Bridge/YunClient.cpp b/libraries/Bridge/YunClient.cpp deleted file mode 100644 index aaaf907..0000000 --- a/libraries/Bridge/YunClient.cpp +++ /dev/null @@ -1,167 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include - -YunClient::YunClient(int _h, BridgeClass &_b) : - bridge(_b), handle(_h), opened(true), buffered(0) { -} - -YunClient::YunClient(BridgeClass &_b) : - bridge(_b), handle(0), opened(false), buffered(0) { -} - -YunClient::~YunClient() { -} - -YunClient& YunClient::operator=(const YunClient &_x) { - opened = _x.opened; - handle = _x.handle; - return *this; -} - -void YunClient::stop() { - if (opened) { - uint8_t cmd[] = {'j', handle}; - bridge.transfer(cmd, 2); - } - opened = false; -} - -void YunClient::doBuffer() { - // If there are already char in buffer exit - if (buffered > 0) - return; - - // Try to buffer up to 32 characters - readPos = 0; - uint8_t cmd[] = {'K', handle, sizeof(buffer)}; - buffered = bridge.transfer(cmd, 3, buffer, sizeof(buffer)); -} - -int YunClient::available() { - // Look if there is new data available - doBuffer(); - return buffered; -} - -int YunClient::read() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else { - buffered--; - return buffer[readPos++]; - } -} - -int YunClient::read(uint8_t *buff, size_t size) { - int readed = 0; - do { - if (buffered == 0) { - doBuffer(); - if (buffered == 0) - return readed; - } - buff[readed++] = buffer[readPos++]; - buffered--; - } while (readed < size); - return readed; -} - -int YunClient::peek() { - doBuffer(); - if (buffered == 0) - return -1; // no chars available - else - return buffer[readPos]; -} - -size_t YunClient::write(uint8_t c) { - if (!opened) - return 0; - uint8_t cmd[] = {'l', handle, c}; - bridge.transfer(cmd, 3); - return 1; -} - -size_t YunClient::write(const uint8_t *buf, size_t size) { - if (!opened) - return 0; - uint8_t cmd[] = {'l', handle}; - bridge.transfer(cmd, 2, buf, size, NULL, 0); - return size; -} - -void YunClient::flush() { -} - -uint8_t YunClient::connected() { - if (!opened) - return false; - uint8_t cmd[] = {'L', handle}; - uint8_t res[1]; - bridge.transfer(cmd, 2, res, 1); - return (res[0] == 1); -} - -int YunClient::connect(IPAddress ip, uint16_t port) { - String address; - address.reserve(18); - address += ip[0]; - address += '.'; - address += ip[1]; - address += '.'; - address += ip[2]; - address += '.'; - address += ip[3]; - return connect(address.c_str(), port); -} - -int YunClient::connect(const char *host, uint16_t port) { - uint8_t tmp[] = { - 'C', - (port >> 8) & 0xFF, - port & 0xFF - }; - uint8_t res[1]; - int l = bridge.transfer(tmp, 3, (const uint8_t *)host, strlen(host), res, 1); - if (l==0) - return 0; - handle = res[0]; - - // wait for connection - uint8_t tmp2[] = { 'c', handle }; - uint8_t res2[1]; - while (true) { - bridge.transfer(tmp2, 2, res2, 1); - if (res2[0] == 0) - break; - delay(1); - } - opened = true; - - // check for successful connection - if (connected()) - return 1; - - opened = false; - handle = 0; - return 0; -} - diff --git a/libraries/Bridge/YunClient.h b/libraries/Bridge/YunClient.h deleted file mode 100644 index 59e3a0c..0000000 --- a/libraries/Bridge/YunClient.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _YUN_CLIENT_H_ -#define _YUN_CLIENT_H_ - -#include -#include - -class YunClient : public Client { -public: - // Constructor with a user provided BridgeClass instance - YunClient(int _h, BridgeClass &_b = Bridge); - YunClient(BridgeClass &_b = Bridge); - ~YunClient(); - - // Stream methods - // (read message) - virtual int available(); - virtual int read(); - virtual int read(uint8_t *buf, size_t size); - virtual int peek(); - // (write response) - virtual size_t write(uint8_t); - virtual size_t write(const uint8_t *buf, size_t size); - virtual void flush(); - // TODO: add optimized function for block write - - virtual operator bool () { return opened; } - - YunClient& operator=(const YunClient &_x); - - virtual void stop(); - virtual uint8_t connected(); - - virtual int connect(IPAddress ip, uint16_t port); - virtual int connect(const char *host, uint16_t port); - -private: - BridgeClass &bridge; - unsigned int handle; - boolean opened; - -private: - void doBuffer(); - uint8_t buffered; - uint8_t readPos; - static const int BUFFER_SIZE = 64; - uint8_t buffer[BUFFER_SIZE]; - -}; - -#endif // _YUN_CLIENT_H_ diff --git a/libraries/Bridge/YunServer.cpp b/libraries/Bridge/YunServer.cpp deleted file mode 100644 index 3473ce8..0000000 --- a/libraries/Bridge/YunServer.cpp +++ /dev/null @@ -1,54 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#include -#include - -YunServer::YunServer(uint16_t _p, BridgeClass &_b) : - bridge(_b), port(_p), listening(false), useLocalhost(false) { -} - -void YunServer::begin() { - uint8_t tmp[] = { - 'N', - (port >> 8) & 0xFF, - port & 0xFF - }; - uint8_t res[1]; - String address = F("127.0.0.1"); - if (!useLocalhost) - address = F("0.0.0.0"); - bridge.transfer(tmp, 3, (const uint8_t *)address.c_str(), address.length(), res, 1); - listening = (res[0] == 1); -} - -YunClient YunServer::accept() { - uint8_t cmd[] = {'k'}; - uint8_t res[1]; - unsigned int l = bridge.transfer(cmd, 1, res, 1); - if (l==0) - return YunClient(); - return YunClient(res[0]); -} - -size_t YunServer::write(uint8_t c) { - uint8_t cmd[] = { 'b', c }; - bridge.transfer(cmd, 2); - return 1; -} - diff --git a/libraries/Bridge/YunServer.h b/libraries/Bridge/YunServer.h deleted file mode 100644 index 69fdeab..0000000 --- a/libraries/Bridge/YunServer.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - Copyright (c) 2013 Arduino LLC. All right reserved. - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#ifndef _YUN_SERVER_H_ -#define _YUN_SERVER_H_ - -#include -#include - -class YunClient; - -class YunServer : public Server { -public: - // Constructor with a user provided BridgeClass instance - YunServer(uint16_t port = 5555, BridgeClass &_b = Bridge); - - void begin(); - YunClient accept(); - - virtual size_t write(uint8_t c); - - void listenOnLocalhost() { useLocalhost = true; } - void noListenOnLocalhost() { useLocalhost = false; } - -private: - uint16_t port; - bool listening; - bool useLocalhost; - BridgeClass &bridge; -}; - -#endif // _YUN_SERVER_H_ diff --git a/libraries/Bridge/examples/Bridge/Bridge.ino b/libraries/Bridge/examples/Bridge/Bridge.ino deleted file mode 100644 index 277982a..0000000 --- a/libraries/Bridge/examples/Bridge/Bridge.ino +++ /dev/null @@ -1,175 +0,0 @@ - -// Possible commands are listed here: -// -// "digital/13" -> digitalRead(13) -// "digital/13/1" -> digitalWrite(13, HIGH) -// "analog/2/123" -> analogWrite(2, 123) -// "analog/2" -> analogRead(2) -// "mode/13/input" -> pinMode(13, INPUT) -// "mode/13/output" -> pinMode(13, OUTPUT) - -#include -#include -#include - -// Listen on default port 5555, the webserver on the Yun -// will forward there all the HTTP requests for us. -YunServer server; - -void setup() { - Serial.begin(9600); - - // Bridge startup - pinMode(13,OUTPUT); - digitalWrite(13, LOW); - Bridge.begin(); - digitalWrite(13, HIGH); - - // Listen for incoming connection only from localhost - // (no one from the external network could connect) - server.listenOnLocalhost(); - server.begin(); -} - -void loop() { - // Get clients coming from server - YunClient client = server.accept(); - - // There is a new client? - if (client) { - // Process request - process(client); - - // Close connection and free resources. - client.stop(); - } - - delay(50); // Poll every 50ms -} - -void process(YunClient client) { - // read the command - String command = client.readStringUntil('/'); - - // is "digital" command? - if (command == "digital") { - digitalCommand(client); - } - - // is "analog" command? - if (command == "analog") { - analogCommand(client); - } - - // is "mode" command? - if (command == "mode") { - modeCommand(client); - } -} - -void digitalCommand(YunClient client) { - int pin, value; - - // Read pin number - pin = client.parseInt(); - - // If the next character is a '/' it means we have an URL - // with a value like: "/digital/13/1" - if (client.read() == '/') { - value = client.parseInt(); - digitalWrite(pin, value); - } - else { - value = digitalRead(pin); - } - - // Send feedback to client - client.print(F("Pin D")); - client.print(pin); - client.print(F(" set to ")); - client.println(value); - - // Update datastore key with the current pin value - String key = "D"; - key += pin; - Bridge.put(key, String(value)); -} - -void analogCommand(YunClient client) { - int pin, value; - - // Read pin number - pin = client.parseInt(); - - // If the next character is a '/' it means we have an URL - // with a value like: "/analog/5/120" - if (client.read() == '/') { - // Read value and execute command - value = client.parseInt(); - analogWrite(pin, value); - - // Send feedback to client - client.print(F("Pin D")); - client.print(pin); - client.print(F(" set to analog ")); - client.println(value); - - // Update datastore key with the current pin value - String key = "D"; - key += pin; - Bridge.put(key, String(value)); - } - else { - // Read analog pin - value = analogRead(pin); - - // Send feedback to client - client.print(F("Pin A")); - client.print(pin); - client.print(F(" reads analog ")); - client.println(value); - - // Update datastore key with the current pin value - String key = "A"; - key += pin; - Bridge.put(key, String(value)); - } -} - -void modeCommand(YunClient client) { - int pin; - - // Read pin number - pin = client.parseInt(); - - // If the next character is not a '/' we have a malformed URL - if (client.read() != '/') { - client.println(F("error")); - return; - } - - String mode = client.readStringUntil('\r'); - - if (mode == "input") { - pinMode(pin, INPUT); - // Send feedback to client - client.print(F("Pin D")); - client.print(pin); - client.print(F(" configured as INPUT!")); - return; - } - - if (mode == "output") { - pinMode(pin, OUTPUT); - // Send feedback to client - client.print(F("Pin D")); - client.print(pin); - client.print(F(" configured as OUTPUT!")); - return; - } - - client.print(F("error: invalid mode ")); - client.print(mode); -} - - diff --git a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino b/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino deleted file mode 100644 index 4cdf4c1..0000000 --- a/libraries/Bridge/examples/ConsoleAsciiTable/ConsoleAsciiTable.ino +++ /dev/null @@ -1,94 +0,0 @@ -/* - ASCII table - - Prints out byte values in all possible formats: - * as raw binary values - * as ASCII-encoded decimal, hex, octal, and binary values - - For more on ASCII, see http://www.asciitable.com and http://en.wikipedia.org/wiki/ASCII - - The circuit: No external hardware needed. - - created 2006 - by Nicholas Zambetti - modified 9 Apr 2012 - by Tom Igoe - modified 22 May 2013 - by Cristian Maglie - - This example code is in the public domain. - - - - */ - -#include - -void setup() { - //Initialize Console and wait for port to open: - Bridge.begin(); - Console.begin(); - - // Uncomment the following line to enable buffering: - // - better transmission speed and efficiency - // - needs to call Console.flush() to ensure that all - // transmitted data is sent - - //Console.buffer(64); - - while (!Console) { - ; // wait for Console port to connect. - } - - // prints title with ending line break - Console.println("ASCII Table ~ Character Map"); -} - -// first visible ASCIIcharacter '!' is number 33: -int thisByte = 33; -// you can also write ASCII characters in single quotes. -// for example. '!' is the same as 33, so you could also use this: -//int thisByte = '!'; - -void loop() { - // prints value unaltered, i.e. the raw binary version of the - // byte. The Console monitor interprets all bytes as - // ASCII, so 33, the first number, will show up as '!' - Console.write(thisByte); - - Console.print(", dec: "); - // prints value as string as an ASCII-encoded decimal (base 10). - // Decimal is the default format for Console.print() and Console.println(), - // so no modifier is needed: - Console.print(thisByte); - // But you can declare the modifier for decimal if you want to. - //this also works if you uncomment it: - - // Console.print(thisByte, DEC); - - Console.print(", hex: "); - // prints value as string in hexadecimal (base 16): - Console.print(thisByte, HEX); - - Console.print(", oct: "); - // prints value as string in octal (base 8); - Console.print(thisByte, OCT); - - Console.print(", bin: "); - // prints value as string in binary (base 2) - // also prints ending line break: - Console.println(thisByte, BIN); - - // if printed last visible character '~' or 126, stop: - if(thisByte == 126) { // you could also use if (thisByte == '~') { - // ensure the latest bit of data is sent - Console.flush(); - - // This loop loops forever and does nothing - while(true) { - continue; - } - } - // go on to the next character - thisByte++; -} diff --git a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino b/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino deleted file mode 100644 index c962b6e..0000000 --- a/libraries/Bridge/examples/ConsolePixel/ConsolePixel.ino +++ /dev/null @@ -1,62 +0,0 @@ -/* - Console Pixel - - An example of using the Arduino board to receive data from the - Console on the Arduino Yun. In this case, the Arduino boards turns on an LED when - it receives the character 'H', and turns off the LED when it - receives the character 'L'. - - To see the Console, pick your Yún's name and IP address in the Port menu - then open the Port Monitor. You can also see it by opening a terminal window - and typing - ssh root@ yourYunsName.local 'telnet localhost 6571' - then pressing enter. When prompted for the password, enter it. - - - The circuit: - * LED connected from digital pin 13 to ground - - created 2006 - by David A. Mellis - modified 25 Jun 2013 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -const int ledPin = 13; // the pin that the LED is attached to -char incomingByte; // a variable to read incoming Console data into - -void setup() { - Bridge.begin(); // Initialize Bridge - Console.begin(); // Initialize Console - - // Wait for the Console port to connect - while(!Console); - - Console.println("type H or L to turn pin 13 on or off"); - - // initialize the LED pin as an output: - pinMode(ledPin, OUTPUT); -} - -void loop() { - // see if there's incoming Console data: - if (Console.available() > 0) { - // read the oldest byte in the Console buffer: - incomingByte = Console.read(); - Console.println(incomingByte); - // if it's a capital H (ASCII 72), turn on the LED: - if (incomingByte == 'H') { - digitalWrite(ledPin, HIGH); - } - // if it's an L (ASCII 76) turn off the LED: - if (incomingByte == 'L') { - digitalWrite(ledPin, LOW); - } - } -} - diff --git a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino b/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino deleted file mode 100644 index 0019c20..0000000 --- a/libraries/Bridge/examples/ConsoleRead/ConsoleRead.ino +++ /dev/null @@ -1,56 +0,0 @@ -/* - Console Read example - - Read data coming from bridge using the Console.read() function - and store it in a string. - - To see the Console, pick your Yún's name and IP address in the Port menu - then open the Port Monitor. You can also see it by opening a terminal window - and typing: - ssh root@ yourYunsName.local 'telnet localhost 6571' - then pressing enter. When prompted for the password, enter it. - - created 13 Jun 2013 - by Angelo Scialabba - modified 16 June 2013 - by Tom Igoe - - This example code is in the public domain. - */ - -#include - -String name; - -void setup() { - // Initialize Console and wait for port to open: - Bridge.begin(); - Console.begin(); - - // Wait for Console port to connect - while (!Console); - - Console.println("Hi, what's your name?"); -} - -void loop() { - if (Console.available() > 0) { - char c = Console.read(); // read the next char received - // look for the newline character, this is the last character in the string - if (c == '\n') { - //print text with the name received - Console.print("Hi "); - Console.print(name); - Console.println("! Nice to meet you!"); - Console.println(); - // Ask again for name and clear the old name - Console.println("Hi, what's your name?"); - name = ""; // clear the name string - } - else { // if the buffer is empty Cosole.read() returns -1 - name += c; // append the read char from Console to the name string - } - } -} - - diff --git a/libraries/Bridge/examples/Datalogger/Datalogger.ino b/libraries/Bridge/examples/Datalogger/Datalogger.ino deleted file mode 100644 index 2d792a4..0000000 --- a/libraries/Bridge/examples/Datalogger/Datalogger.ino +++ /dev/null @@ -1,99 +0,0 @@ -/* - SD card datalogger - - This example shows how to log data from three analog sensors - to an SD card mounted on the Arduino Yún using the Bridge library. - - The circuit: - * analog sensors on analog pins 0, 1 and 2 - * SD card attached to SD card slot of the Arduino Yún - - Prepare your SD card creating an empty folder in the SD root - named "arduino". This will ensure that the Yún will create a link - to the SD to the "/mnt/sd" path. - - You can remove the SD card while the Linux and the - sketch are running but be careful not to remove it while - the system is writing to it. - - created 24 Nov 2010 - modified 9 Apr 2012 - by Tom Igoe - adapted to the Yún Bridge library 20 Jun 2013 - by Federico Vanzati - modified 21 Jun 2013 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -void setup() { - // Initialize the Bridge and the Serial - Bridge.begin(); - Serial.begin(9600); - FileSystem.begin(); - - while(!Serial); // wait for Serial port to connect. - Serial.println("Filesystem datalogger\n"); -} - - -void loop () { - // make a string that start with a timestamp for assembling the data to log: - String dataString; - dataString += getTimeStamp(); - dataString += " = "; - - // read three sensors and append to the string: - for (int analogPin = 0; analogPin < 3; analogPin++) { - int sensor = analogRead(analogPin); - dataString += String(sensor); - if (analogPin < 2) { - dataString += ","; // separate the values with a comma - } - } - - // open the file. note that only one file can be open at a time, - // so you have to close this one before opening another. - // The FileSystem card is mounted at the following "/mnt/FileSystema1" - File dataFile = FileSystem.open("/mnt/sd/datalog.txt", FILE_APPEND); - - // if the file is available, write to it: - if (dataFile) { - dataFile.println(dataString); - dataFile.close(); - // print to the serial port too: - Serial.println(dataString); - } - // if the file isn't open, pop up an error: - else { - Serial.println("error opening datalog.txt"); - } - - delay(15000); - -} - -// This function return a string with the time stamp -String getTimeStamp() { - String result; - Process time; - // date is a command line utility to get the date and the time - // in different formats depending on the additional parameter - time.begin("date"); - time.addParameter("+%D-%T"); // parameters: D for the complete date mm/dd/yy - // T for the time hh:mm:ss - time.run(); // run the command - - // read the output of the command - while(time.available()>0) { - char c = time.read(); - if(c != '\n') - result += c; - } - - return result; -} diff --git a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino b/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino deleted file mode 100644 index b550db2..0000000 --- a/libraries/Bridge/examples/FileWriteScript/FileWriteScript.ino +++ /dev/null @@ -1,82 +0,0 @@ -/* - Write to file using FileIO classes. - - This sketch demonstrate how to write file into the Yún filesystem. - A shell script file is created in /tmp, and it is executed afterwards. - - created 7 June 2010 - by Cristian Maglie - - This example code is in the public domain. - - */ - -#include - -void setup() { - // Setup Bridge (needed every time we communicate with the Arduino Yún) - Bridge.begin(); - // Initialize the Serial - Serial.begin(9600); - - while(!Serial); // wait for Serial port to connect. - Serial.println("File Write Script example\n\n"); - - // Setup File IO - FileSystem.begin(); - - // Upload script used to gain network statistics - uploadScript(); -} - -void loop() { - // Run stats script every 5 secs. - runScript(); - delay(5000); -} - -// this function creates a file into the linux processor that contains a shell script -// to check the network traffic of the WiFi interface -void uploadScript() { - // Write our shell script in /tmp - // Using /tmp stores the script in RAM this way we can preserve - // the limited amount of FLASH erase/write cycles - File script = FileSystem.open("/tmp/wlan-stats.sh", FILE_WRITE); - // Shell script header - script.print("#!/bin/sh\n"); - // shell commands: - // ifconfig: is a command line utility for controlling the network interfaces. - // wlan0 is the interface we want to query - // grep: search inside the output of the ifconfig command the "RX bytes" keyword - // and extract the line that contains it - script.print("ifconfig wlan0 | grep 'RX bytes'\n"); - script.close(); // close the file - - // Make the script executable - Process chmod; - chmod.begin("chmod"); // chmod: change mode - chmod.addParameter("+x"); // x stays for executable - chmod.addParameter("/tmp/wlan-stats.sh"); // path to the file to make it executable - chmod.run(); -} - - -// this function run the script and read the output data -void runScript() { - // Run the script and show results on the Serial - Process myscript; - myscript.begin("/tmp/wlan-stats.sh"); - myscript.run(); - - String output = ""; - - // read the output of the script - while (myscript.available()) { - output += (char)myscript.read(); - } - // remove the blank spaces at the beginning and the ending of the string - output.trim(); - Serial.println(output); - Serial.flush(); -} - diff --git a/libraries/Bridge/examples/HttpClient/HttpClient.ino b/libraries/Bridge/examples/HttpClient/HttpClient.ino deleted file mode 100644 index 4104ef4..0000000 --- a/libraries/Bridge/examples/HttpClient/HttpClient.ino +++ /dev/null @@ -1,26 +0,0 @@ - -#include -#include - -void setup() { - pinMode(13, OUTPUT); - digitalWrite(13, LOW); - Bridge.begin(); - Serial.begin(9600); - while(!Serial); -} - -void loop() { - HttpClient client; - client.get("http://arduino.cc/asciilogo.txt"); - - while (client.available()) { - char c = client.read(); - Serial.print(c); - } - Serial.flush(); - - delay(5000); -} - - diff --git a/libraries/Bridge/examples/Process/Process.ino b/libraries/Bridge/examples/Process/Process.ino deleted file mode 100644 index 7646d15..0000000 --- a/libraries/Bridge/examples/Process/Process.ino +++ /dev/null @@ -1,70 +0,0 @@ -/* - Running process using Process class. - - This sketch demonstrate how to run linux processes - using an Arduino Yún. - - created 5 Jun 2013 - by Cristian Maglie - - This example code is in the public domain. - - */ - -#include - -void setup() { - // Initialize Bridge - Bridge.begin(); - - // Initialize Serial - Serial.begin(9600); - - // Wait until a Serial Monitor is connected. - while (!Serial); - - // run various example processes - runCurl(); - runCpuInfo(); -} - -void loop() { - // Do nothing here. -} - -void runCurl() { - // Launch "curl" command and get Arduino ascii art logo from the network - // curl is command line program for transferring data using different internet protocols - Process p; // Create a process and call it "p" - p.begin("curl"); // Process that launch the "curl" command - p.addParameter("http://arduino.cc/asciilogo.txt"); // Add the URL parameter to "curl" - p.run(); // Run the process and wait for its termination - - // Print arduino logo over the Serial - // A process output can be read with the stream methods - while (p.available()>0) { - char c = p.read(); - Serial.print(c); - } - // Ensure the last bit of data is sent. - Serial.flush(); -} - -void runCpuInfo() { - // Launch "cat /proc/cpuinfo" command (shows info on Atheros CPU) - // cat is a command line utility that shows the content of a file - Process p; // Create a process and call it "p" - p.begin("cat"); // Process that launch the "cat" command - p.addParameter("/proc/cpuinfo"); // Add the cpuifo file path as parameter to cut - p.run(); // Run the process and wait for its termination - - // Print command output on the Serial. - // A process output can be read with the stream methods - while (p.available()>0) { - char c = p.read(); - Serial.print(c); - } - // Ensure the last bit of data is sent. - Serial.flush(); -} - diff --git a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino b/libraries/Bridge/examples/ShellCommands/ShellCommands.ino deleted file mode 100644 index 5a4c291..0000000 --- a/libraries/Bridge/examples/ShellCommands/ShellCommands.ino +++ /dev/null @@ -1,53 +0,0 @@ -/* - Running shell commands using Process class. - - This sketch demonstrate how to run linux shell commands - using an Arduino Yún. It runs the wifiCheck script on the linino side - of the Yun, then uses grep to get just the signal strength line. - Then it uses parseInt() to read the wifi signal strength as an integer, - and finally uses that number to fade an LED using analogWrite(). - - The circuit: - * Arduino Yun with LED connected to pin 9 - - created 12 Jun 2013 - by Cristian Maglie - modified 25 June 2013 - by Tom Igoe - - This example code is in the public domain. - - */ - -#include - -void setup() { - Bridge.begin(); // Initialize the Bridge - Serial.begin(9600); // Initialize the Serial - - // Wait until a Serial Monitor is connected. - while(!Serial); -} - -void loop() { - Process p; - // This command line runs the WifiStatus script, (/usr/bin/pretty-wifi-info.lua), then - // sends the result to the grep command to look for a line containing the word - // "Signal:" the result is passed to this sketch: - p.runShellCommand("/usr/bin/pretty-wifi-info.lua | grep Signal"); - - // do nothing until the process finishes, so you get the whole output: - while(p.running()); - - // Read command output. runShellCommand() should have passed "Signal: xx&": - while (p.available()) { - int result = p.parseInt(); // look for an integer - int signal = map(result, 0, 100, 0, 255); // map result from 0-100 range to 0-255 - analogWrite(9, signal); // set the brightness of LED on pin 9 - Serial.println(result); // print the number as well - } - delay(5000); // wait 5 seconds before you do it again -} - - - diff --git a/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino b/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino deleted file mode 100644 index be22850..0000000 --- a/libraries/Bridge/examples/SpacebrewYun/inputOutput/inputOutput.ino +++ /dev/null @@ -1,130 +0,0 @@ -/* - Input Output - - Demonstrates how to create a sketch that sends and receives all standard - spacebrew data types, and a custom data type. Every time data is - received it is output to the Serial monitor. - - Make sure that your Yun is connected to the internet for this example - to function properly. - - The circuit: - - No circuit required - - created 2013 - by Julio Terra - - This example code is in the public domain. - - More information about Spacebrew is available at: - http://spacebrew.cc/ - - */ - -#include -#include - -// create a variable of type SpacebrewYun and initialize it with the constructor -SpacebrewYun sb = SpacebrewYun("aYun", "Arduino Yun spacebrew test"); - -// create variables to manage interval between each time we send a string -long last = 0; -int interval = 2000; - -int counter = 0; - -void setup() { - - // start the serial port - Serial.begin(57600); - - // for debugging, wait until a serial console is connected - delay(4000); - while (!Serial) { ; } - - // start-up the bridge - Bridge.begin(); - - // configure the spacebrew object to print status messages to serial - sb.verbose(true); - - // configure the spacebrew publisher and subscriber - sb.addPublish("string test", "string"); - sb.addPublish("range test", "range"); - sb.addPublish("boolean test", "boolean"); - sb.addPublish("custom test", "crazy"); - sb.addSubscribe("string test", "string"); - sb.addSubscribe("range test", "range"); - sb.addSubscribe("boolean test", "boolean"); - sb.addSubscribe("custom test", "crazy"); - - // register the string message handler method - sb.onRangeMessage(handleRange); - sb.onStringMessage(handleString); - sb.onBooleanMessage(handleBoolean); - sb.onCustomMessage(handleCustom); - - // connect to cloud spacebrew server at "sandbox.spacebrew.cc" - sb.connect("sandbox.spacebrew.cc"); - -} - - -void loop() { - // monitor spacebrew connection for new data - sb.monitor(); - - // connected to spacebrew then send a string every 2 seconds - if ( sb.connected() ) { - - // check if it is time to send a new message - if ( (millis() - last) > interval ) { - String test_str_msg = "testing, testing, "; - test_str_msg += counter; - counter ++; - - sb.send("string test", test_str_msg); - sb.send("range test", 500); - sb.send("boolean test", true); - sb.send("custom test", "youre loco"); - - last = millis(); - - } - } -} - -// define handler methods, all standard data type handlers take two appropriate arguments - -void handleRange (String route, int value) { - Serial.print("Range msg "); - Serial.print(route); - Serial.print(", value "); - Serial.println(value); -} - -void handleString (String route, String value) { - Serial.print("String msg "); - Serial.print(route); - Serial.print(", value "); - Serial.println(value); -} - -void handleBoolean (String route, boolean value) { - Serial.print("Boolen msg "); - Serial.print(route); - Serial.print(", value "); - Serial.println(value ? "true" : "false"); -} - -// custom data type handlers takes three String arguments - -void handleCustom (String route, String value, String type) { - Serial.print("Custom msg "); - Serial.print(route); - Serial.print(" of type "); - Serial.print(type); - Serial.print(", value "); - Serial.println(value); -} - diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino deleted file mode 100644 index 0f068aa..0000000 --- a/libraries/Bridge/examples/SpacebrewYun/spacebrewBoolean/spacebrewBoolean.ino +++ /dev/null @@ -1,89 +0,0 @@ -/* - Spacebrew Boolean - - Demonstrates how to create a sketch that sends and receives a - boolean value to and from Spacebrew. Every time the buttton is - pressed (or other digital input component) a spacebrew message - is sent. The sketch also accepts analog range messages from - other Spacebrew apps. - - Make sure that your Yun is connected to the internet for this example - to function properly. - - The circuit: - - Button connected to Yun, using the Arduino's internal pullup resistor. - - created 2013 - by Julio Terra - - This example code is in the public domain. - - More information about Spacebrew is available at: - http://spacebrew.cc/ - - */ - -#include -#include - -// create a variable of type SpacebrewYun and initialize it with the constructor -SpacebrewYun sb = SpacebrewYun("spacebrewYun Boolean", "Boolean sender and receiver"); - -// variable that holds the last potentiometer value -int last_value = 0; - -// create variables to manage interval between each time we send a string -void setup() { - - // start the serial port - Serial.begin(57600); - - // for debugging, wait until a serial console is connected - delay(4000); - while (!Serial) { ; } - - // start-up the bridge - Bridge.begin(); - - // configure the spacebrew object to print status messages to serial - sb.verbose(true); - - // configure the spacebrew publisher and subscriber - sb.addPublish("physical button", "boolean"); - sb.addSubscribe("virtual button", "boolean"); - - // register the string message handler method - sb.onBooleanMessage(handleBoolean); - - // connect to cloud spacebrew server at "sandbox.spacebrew.cc" - sb.connect("sandbox.spacebrew.cc"); - - pinMode(3, INPUT); - digitalWrite(3, HIGH); -} - - -void loop() { - // monitor spacebrew connection for new data - sb.monitor(); - - // connected to spacebrew then send a new value whenever the pot value changes - if ( sb.connected() ) { - int cur_value = digitalRead(3); - if ( last_value != cur_value ) { - if (cur_value == HIGH) sb.send("physical button", false); - else sb.send("physical button", true); - last_value = cur_value; - } - } -} - -// handler method that is called whenever a new string message is received -void handleBoolean (String route, boolean value) { - // print the message that was received - Serial.print("From "); - Serial.print(route); - Serial.print(", received msg: "); - Serial.println(value ? "true" : "false"); -} - diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino deleted file mode 100644 index 6dcbff8..0000000 --- a/libraries/Bridge/examples/SpacebrewYun/spacebrewRange/spacebrewRange.ino +++ /dev/null @@ -1,86 +0,0 @@ -/* - Spacebrew Range - - Demonstrates how to create a sketch that sends and receives analog - range value to and from Spacebrew. Every time the state of the - potentiometer (or other analog input component) change a spacebrew - message is sent. The sketch also accepts analog range messages from - other Spacebrew apps. - - Make sure that your Yun is connected to the internet for this example - to function properly. - - The circuit: - - Potentiometer connected to Yun. Middle pin connected to analog pin A0, - other pins connected to 5v and GND pins. - - created 2013 - by Julio Terra - - This example code is in the public domain. - - More information about Spacebrew is available at: - http://spacebrew.cc/ - - */ - -#include -#include - -// create a variable of type SpacebrewYun and initialize it with the constructor -SpacebrewYun sb = SpacebrewYun("spacebrewYun Range", "Range sender and receiver"); - -// variable that holds the last potentiometer value -int last_value = 0; - -// create variables to manage interval between each time we send a string -void setup() { - - // start the serial port - Serial.begin(57600); - - // for debugging, wait until a serial console is connected - delay(4000); - while (!Serial) { ; } - - // start-up the bridge - Bridge.begin(); - - // configure the spacebrew object to print status messages to serial - sb.verbose(true); - - // configure the spacebrew publisher and subscriber - sb.addPublish("physical pot", "range"); - sb.addSubscribe("virtual pot", "range"); - - // register the string message handler method - sb.onRangeMessage(handleRange); - - // connect to cloud spacebrew server at "sandbox.spacebrew.cc" - sb.connect("sandbox.spacebrew.cc"); -} - - -void loop() { - // monitor spacebrew connection for new data - sb.monitor(); - - // connected to spacebrew then send a new value whenever the pot value changes - if ( sb.connected() ) { - int cur_value = analogRead(A0); - if ( last_value != cur_value ) { - sb.send("physical pot", cur_value); - last_value = cur_value; - } - } -} - -// handler method that is called whenever a new string message is received -void handleRange (String route, int value) { - // print the message that was received - Serial.print("From "); - Serial.print(route); - Serial.print(", received msg: "); - Serial.println(value); -} - diff --git a/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino b/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino deleted file mode 100644 index 8c8f1c7..0000000 --- a/libraries/Bridge/examples/SpacebrewYun/spacebrewString/spacebrewString.ino +++ /dev/null @@ -1,84 +0,0 @@ -/* - Spacebrew String - - Demonstrates how to create a sketch that sends and receives strings - to and from Spacebrew. Every time string data is received it - is output to the Serial monitor. - - Make sure that your Yun is connected to the internet for this example - to function properly. - - The circuit: - - No circuit required - - created 2013 - by Julio Terra - - This example code is in the public domain. - - More information about Spacebrew is available at: - http://spacebrew.cc/ - - */ - -#include -#include - -// create a variable of type SpacebrewYun and initialize it with the constructor -SpacebrewYun sb = SpacebrewYun("spacebrewYun Strings", "String sender and receiver"); - -// create variables to manage interval between each time we send a string -long last_time = 0; -int interval = 2000; - -void setup() { - - // start the serial port - Serial.begin(57600); - - // for debugging, wait until a serial console is connected - delay(4000); - while (!Serial) { ; } - - // start-up the bridge - Bridge.begin(); - - // configure the spacebrew object to print status messages to serial - sb.verbose(true); - - // configure the spacebrew publisher and subscriber - sb.addPublish("speak", "string"); - sb.addSubscribe("listen", "string"); - - // register the string message handler method - sb.onStringMessage(handleString); - - // connect to cloud spacebrew server at "sandbox.spacebrew.cc" - sb.connect("sandbox.spacebrew.cc"); -} - - -void loop() { - // monitor spacebrew connection for new data - sb.monitor(); - - // connected to spacebrew then send a string every 2 seconds - if ( sb.connected() ) { - - // check if it is time to send a new message - if ( (millis() - last_time) > interval ) { - sb.send("speak", "is anybody out there?"); - last_time = millis(); - } - } -} - -// handler method that is called whenever a new string message is received -void handleString (String route, String value) { - // print the message that was received - Serial.print("From "); - Serial.print(route); - Serial.print(", received msg: "); - Serial.println(value); -} - diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino b/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino deleted file mode 100644 index 6543935..0000000 --- a/libraries/Bridge/examples/Temboo/ControlBySMS/ControlBySMS.ino +++ /dev/null @@ -1,443 +0,0 @@ -/* - ControlBySMS - - Demonstrates using an SMS message to a Twilio account to turn an LED - on the Yun board on and off using the Temboo Arduino Yun SDK. - Sending a SMS with the text "LED ON" to your Twilio phone number - will turn on the LED on the Yun. Sending "LED OFF" will turn it off. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Twilio to retrieve the SMS, you'll also need a valid - Twilio account. You can create one for free at https://www.twilio.com. - - The sketch needs your Twilio Account SID and Auth Token you get when you - register with Twilio. Make sure to use the Account SID and Auth Token from - your Twilio Dashboard (not your test credentials from the Dev Tools panel). - - Normally, Twilio expects to contact a web site you provide to get a response - when an SMS message is received for your Twilio number. In this case, we - don't want to send any response (and we don't want to have to set up a web - site just to receive SMS messages.) You can use a URL that Twilio provides - for this purpose. When a message is received and sent to the Twilio "twimlets" - URL, it returns a code meaning "no response required." To set this up: - - 1. Log in to your Twilio account and go to this URL: - - https://www.twilio.com/user/account/phone-numbers/incoming - - 2. Select the Twilio number you want to receive SMS messages at. - - 3. Put this URL in the "SMS Request URL" field: - - http://twimlets.com/echo?Twiml=%3CResponse%3E%3C%2FResponse%3E - - See this link to Twilio's FAQ for details: - - https://www.twilio.com/help/faq/sms/how-can-i-receive-sms-messages-without-responding - - 4. Click the "Save Changes" button at the bottom of the page. - - Your account will now receive SMS messages, but won't send any responses. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// the Account SID from your Twilio account -const String TWILIO_ACCOUNT_SID = "xxxxxxxxxxxxxxxxxx"; - -// the Auth Token from your Twilio account -const String TWILIO_AUTH_TOKEN = "xxxxxxxxxxxxxxxxx"; - -// only act on messages sent from this phone number. (e.g. 15415551212) -const String FROM_PHONE_NUMBER = "xxxxxxxxxxx"; - -// how often (in milliseconds) to check for new SMS messages. -const unsigned long SMS_CHECK_PERIOD = 60000; - -// keep track of when we last checked for new messages -// (initialize it to SMS_CHECK_PERIOD seconds ago so -// we do the first check as soon as the sketch starts.) -unsigned long lastSMSCheckTime = -SMS_CHECK_PERIOD; - -// keep track of the ID of the last SMS message we processed. -// (we only need to process newer messages) -String lastSid; - -// we'll be turning the LED built in to the Yun on and off -// to simulate controlling some device. That LED is on pin 13. -int LED_PIN = 13; - -int numRuns = 1; // execution count, so this doesn't run forever -int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run - - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - // tell the board to treat the LED pin as an output. - pinMode(LED_PIN, OUTPUT); - - // start with the LED off - digitalWrite(LED_PIN, LOW); - - // initialize the connection to the Linino processor. - Bridge.begin(); - - // Twilio will report old SMS messages. We want to - // ignore any existing control messages when we start. - Serial.println("Ignoring any existing control messages..."); - checkForMessages(true); - -} - -void loop() -{ - - // get the number of milliseconds the CPU has been running. - unsigned long now = millis(); - - // see if it's time to check for new SMS messages. - if (now - lastSMSCheckTime >= SMS_CHECK_PERIOD) { - - // it's time to check for new messages - // save this time so we know when to check next - lastSMSCheckTime = now; - - if (numRuns <= maxRuns) { - Serial.println("Checking for new SMS messages - Run #" + String(numRuns++)); - - // execute the choreo and don't ignore control messages. - checkForMessages(false); - } else { - Serial.println("Already ran " + String(maxRuns) + " times."); - } - } -} - -/* -This function executes the Twilio > SMSMessages > ListMessages choreo -and processes the results. - -If ignoreCommands is 'true', this function will read and process messages -updating 'lastSid', but will not actually take any action on any commands -found. This is so we can ignore any old control messages when we start. - -If ignoreCommands is 'false', control messages WILL be acted on. -*/ -void checkForMessages(bool ignoreCommands) { - - // we need a TembooChoreo object to send a Choreo request to Temboo - TembooChoreo ListMessagesChoreo; - - ListMessagesChoreo.begin(); - - // set Temboo account credentials - ListMessagesChoreo.setAccountName(TEMBOO_ACCOUNT); - ListMessagesChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - ListMessagesChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twilio > SMSMessages > ListMessages) - ListMessagesChoreo.setChoreo("/Library/Twilio/SMSMessages/ListMessages"); - - // set the choreo inputs - // see https://www.temboo.com/library/Library/Twilio/SMSMessages/ListMessages/ - // for complete details about the inputs for this Choreo - - // the first input is a your Twilio AccountSID - ListMessagesChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID); - - // next is your Twilio Auth Token - ListMessagesChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN); - - // we only want to know about messages sent from our designated phone number - ListMessagesChoreo.addInput("From", FROM_PHONE_NUMBER); - - // Twilio can return information about up to 1000 messages at a time. - // we're only interested in the 3 most recent ones. Note that if - // this account receives lots of messages in quick succession, - // (more than 3 per minute in this case), we might miss some control - // messages. But if we request too many messages, we might run out of - // memory on the Arduino side of the Yun. - ListMessagesChoreo.addInput("PageSize", "3"); - - // We want the response in XML format to process with our - // XPath output filters. - ListMessagesChoreo.addInput("ResponseFormat", "xml"); - - // we don't want everything from the output, just the - // message IDs (the Sids) and the message texts - ListMessagesChoreo.addOutputFilter("sid", "Sid", "Response"); - ListMessagesChoreo.addOutputFilter("text", "Body", "Response"); - - // tell the Choreo to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = ListMessagesChoreo.run(); - - // a return code of zero (0) means success - if (returnCode == 0) { - - // Need a string to hold the list of message IDs. - String messageSids; - - // Need a string to hold the texts of the messages. - String messageTexts; - - // when the choreo results are available, process them. - // the output filters we specified will return comma delimited - // lists containing the Sids and texts of the messages - // from our designated phone number. - - while(ListMessagesChoreo.available()) { - - // output names are terminated with '\x1F' characters. - String name = ListMessagesChoreo.readStringUntil('\x1F'); - name.trim(); - //Serial.println(name); - - // output values are terminated with '\x1E' characters. - String data = ListMessagesChoreo.readStringUntil('\x1E'); - data.trim(); - //Serial.println(data); - - // assign the data to the appropriate string based on the name - if (name == "sid") { - messageSids = data; - } else if (name == "text") { - messageTexts = data; - } - } - - // done reading output, close the Choreo to free up resources. - ListMessagesChoreo.close(); - - // parse the comma delimited lists of messages and Sids - processMessages(messageTexts, messageSids, ignoreCommands); - - } else { - // a non-zero return code means there was an error - // read and print the error message - while(ListMessagesChoreo.available()) { - char c = ListMessagesChoreo.read(); - Serial.print(c); - } - } -} - -/* -This function processes the lists of message texts and Sids. -If a message contains a comma as part of the -message text, that message will be enclosed in double quotes -(") in the list. Example: - - A message,"Hey, now",Another message text - -If the message contains double quotes, it will be enclosed in -double quotes AND the internal quotes will be doubled. -Example: - - "Hi ""Sam"" the man", Led on - -NOTE! We are assuming that Twilio returns more recent messages -first. This isn't officially documented by Twilio, but we've -not seen any other case. - -'messageTexts' is a String containing a comma separated list of -message texts with commas and quotes escaped as described above. - -'messageSids' is a String containing a comma separated list of -message Sids. Sids should not contain embedded commas or quotes. - -'ignoreCommands' is a boolean. 'true' means and control messages -will not be acted upon. 'false' means control messages will be -acted upon in the usual way. -*/ -void processMessages(String messageTexts, String messageSids, bool ignoreCommands) { - - // proceed if we received at least one message - if (messageSids.length() > 0) { - int i = -1; - int sidsStart = 0; - int textsStart = 0; - String sid; - String text; - bool ledUpdated = false; - - // go through the list until we run out of items - // or otherwise know we can stop - do { - - // Output filter list items are separated by commas - // find the start of the next item in the list - i = messageSids.indexOf(',', sidsStart); - if (i >= 0) { - - //extract a single Sid from the list. - sid = messageSids.substring(sidsStart, i); - sidsStart = i + 1; - - // find the start of the next text in the list. - // Note that we have to be prepared to handle embedded - // quotes and commans in the message texts. - // The standard Arduino String class doesn't handle - // this, so we have to write our own function to do it. - i = quotedIndexOf(messageTexts, ',', textsStart); - if (i >= 0) { - - // extract a single message text from the list. - text = messageTexts.substring(textsStart, i); - textsStart = i + 1; - - // process the Sid and text to see if it's a - // control message. - ledUpdated = processMessage(sid, text, ignoreCommands); - } - } else { - - // the last item in the lists won't have a comma at the end, - // so we have to handle them specially. - // Since we know this is the last item, we can just - // take the rest of the string for the Sid and text. - sid = messageSids.substring(sidsStart); - text = messageTexts.substring(textsStart); - - // process the last item. - ledUpdated = processMessage(sid, text, ignoreCommands); - } - - // keep going until either we run out of list items - // or we run into a message we processed on a previous run. - } while ((i >=0) && (sid != lastSid)); - - // print what we've found to the serial monitor, - // just so we can see what's going on. - if (sid == lastSid) { - if (ledUpdated) - Serial.println("Control message processed."); - else - Serial.println("No new control messages received."); - } else { - Serial.println("No control messages received."); - } - } else { - Serial.println("No messages found"); - } -} - -/* -This function knows how to tell if a message is a control message -or not. It also knows know to control whatever it is we're controlling -(the state of the LED on pin 13 in this case.) - -A message with the text "LED ON" turns the LED on. -A message with the text "LED OFF" turns the LED off. -(Case is ignored.) - -If 'ignoreCommands' is true, the actions described above will NOT -take place. - -It also updates the 'lastSid' global variable when -a control message is processed. - -It returns 'true' if the message was a control message, and -'false' if it wasn't or if we've already processed this message. -*/ -bool processMessage(String sid, String text, bool ignoreCommands) { - - // a flag to indicate whether this was a control message or not - bool ledUpdated = false; - - // if we haven't already processed this message - if (sid != lastSid) { - - if (text.equalsIgnoreCase("LED ON")) { - - if (!ignoreCommands) { - //turn on the LED - digitalWrite(LED_PIN, HIGH); - Serial.println("LED ON"); - } - ledUpdated = true; - } else if (text.equalsIgnoreCase("LED OFF")) { - if (!ignoreCommands) { - //turn off the LED - digitalWrite(LED_PIN, LOW); - Serial.println("LED OFF"); - } - ledUpdated = true; - } - - // If the LED state was updated, remember the Sid if this message. - if (ledUpdated) - lastSid = sid; - } - return ledUpdated; -} - -/* -This function finds the index of a delimiter character in a String, -ignoring delimiters that appear inside double-quotes. -*/ -int quotedIndexOf(String s, char delim, int start) { - bool inQuotes = false; - char c; - int index = -1; - const char QUOTE = '"'; - do { - c = s[start++]; - if (c == QUOTE) - inQuotes = !inQuotes; - else if (c == delim && !inQuotes) - index = --start; - } while ((c != '\0') && (index < 0)); - return index; -} - - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can save it once, - then just distribute the main .ino file without worrying that you forgot to delete your credentials. -*/ - diff --git a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/ControlBySMS/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino deleted file mode 100644 index 669aba5..0000000 --- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/GetYahooWeatherReport.ino +++ /dev/null @@ -1,115 +0,0 @@ -/* - GetYahooWeatherReport - - Demonstrates making a request to the Yahoo! Weather API using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -// the address for which a weather forecast will be retrieved -String ADDRESS_FOR_FORECAST = "104 Franklin St., New York NY 10013"; - -int numRuns = 1; // execution count, so that this doesn't run forever -int maxRuns = 10; // max number of times the Yahoo WeatherByAddress Choreo should be run - - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - Bridge.begin(); - -} - -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running GetWeatherByAddress - Run #" + String(numRuns++) + "..."); - - // create a TembooChoreo object to send a Choreo request to Temboo - TembooChoreo GetWeatherByAddressChoreo; - - // invoke the Temboo client - GetWeatherByAddressChoreo.begin(); - - // add your temboo account info - GetWeatherByAddressChoreo.setAccountName(TEMBOO_ACCOUNT); - GetWeatherByAddressChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - GetWeatherByAddressChoreo.setAppKey(TEMBOO_APP_KEY); - - // set the name of the choreo we want to run - GetWeatherByAddressChoreo.setChoreo("/Library/Yahoo/Weather/GetWeatherByAddress"); - - // set choreo inputs; in this case, the address for which to retrieve weather data - // the Temboo client provides standardized calls to 100+ cloud APIs - GetWeatherByAddressChoreo.addInput("Address", ADDRESS_FOR_FORECAST); - - // add an output filter to extract the name of the city. - GetWeatherByAddressChoreo.addOutputFilter("city", "/rss/channel/yweather:location/@city", "Response"); - - // add an output filter to extract the current temperature - GetWeatherByAddressChoreo.addOutputFilter("temperature", "/rss/channel/item/yweather:condition/@temp", "Response"); - - // add an output filter to extract the date and time of the last report. - GetWeatherByAddressChoreo.addOutputFilter("date", "/rss/channel/item/yweather:condition/@date", "Response"); - - // run the choreo - GetWeatherByAddressChoreo.run(); - - // when the choreo results are available, print them to the serial monitor - while(GetWeatherByAddressChoreo.available()) { - - char c = GetWeatherByAddressChoreo.read(); - Serial.print(c); - } - GetWeatherByAddressChoreo.close(); - - } - - Serial.println("Waiting..."); - Serial.println(""); - delay(30000); // wait 30 seconds between GetWeatherByAddress calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h b/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/GetYahooWeatherReport/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino b/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino deleted file mode 100644 index b2edd1f..0000000 --- a/libraries/Bridge/examples/Temboo/ReadATweet/ReadATweet.ino +++ /dev/null @@ -1,173 +0,0 @@ -/* - ReadATweet - - Demonstrates retrieving the most recent Tweet from a user's home timeline - using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Twitter dev console at https://dev.twitter.com. After creating the - app, you'll find OAuth credentials for that application under the "OAuth Tool" tab. - Substitute these values for the placeholders below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun - is connected to the Internet. - - Want to use another social API with your Arduino Yun? We've got Facebook, - Google+, Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. -const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token"; -const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret"; -const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key"; -const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret"; - -int numRuns = 1; // execution count, so this doesn't run forever -int maxRuns = 10; // the max number of times the Twitter HomeTimeline Choreo should run - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - Serial.println("Running ReadATweet - Run #" + String(numRuns++)); - - TembooChoreo HomeTimelineChoreo; - - // invoke the Temboo client. - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - HomeTimelineChoreo.begin(); - - // set Temboo account credentials - HomeTimelineChoreo.setAccountName(TEMBOO_ACCOUNT); - HomeTimelineChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - HomeTimelineChoreo.setAppKey(TEMBOO_APP_KEY); - - // tell the Temboo client which Choreo to run (Twitter > Timelines > HomeTimeline) - HomeTimelineChoreo.setChoreo("/Library/Twitter/Timelines/HomeTimeline"); - - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twitter/Timelines/HomeTimeline/ - // for complete details about the inputs for this Choreo - - HomeTimelineChoreo.addInput("Count", "1"); // the max number of Tweets to return from each request - HomeTimelineChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN); - HomeTimelineChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET); - HomeTimelineChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY); - HomeTimelineChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET); - - // next, we'll define two output filters that let us specify the - // elements of the response from Twitter that we want to receive. - // see the examples at http://www.temboo.com/arduino - // for more on using output filters - - // we want the text of the tweet - HomeTimelineChoreo.addOutputFilter("tweet", "/[1]/text", "Response"); - - // and the name of the author - HomeTimelineChoreo.addOutputFilter("author", "/[1]/user/screen_name", "Response"); - - - // tell the Process to run and wait for the results. The - // return code will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = HomeTimelineChoreo.run(); - - // a response code of 0 means success; print the API response - if(returnCode == 0) { - - String author; // a String to hold the tweet author's name - String tweet; // a String to hold the text of the tweet - - - // choreo outputs are returned as key/value pairs, delimited with - // newlines and record/field terminator characters, for example: - // Name1\n\x1F - // Value1\n\x1E - // Name2\n\x1F - // Value2\n\x1E - - // see the examples at http://www.temboo.com/arduino for more details - // we can read this format into separate variables, as follows: - - while(HomeTimelineChoreo.available()) { - // read the name of the output item - String name = HomeTimelineChoreo.readStringUntil('\x1F'); - name.trim(); - - // read the value of the output item - String data = HomeTimelineChoreo.readStringUntil('\x1E'); - data.trim(); - - // assign the value to the appropriate String - if (name == "tweet") { - tweet = data; - } else if (name == "author") { - author = data; - } - } - - Serial.println("@" + author + " - " + tweet); - - } else { - // there was an error - // print the raw output from the choreo - while(HomeTimelineChoreo.available()) { - char c = HomeTimelineChoreo.read(); - Serial.print(c); - } - } - - HomeTimelineChoreo.close(); - - } - - Serial.println("Waiting..."); - delay(90000); // wait 90 seconds between HomeTimeline calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/ReadATweet/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino b/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino deleted file mode 100644 index 2e34a82..0000000 --- a/libraries/Bridge/examples/Temboo/SendATweet/SendATweet.ino +++ /dev/null @@ -1,138 +0,0 @@ -/* - SendATweet - - Demonstrates sending a tweet via a Twitter account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Twitter dev console at https://dev.twitter.com. Note that since this - sketch creates a new tweet, your application will need to be configured with - read+write permissions. After creating the app, you'll find OAuth credentials - for that application under the "OAuth Tool" tab. Substitute these values for - the placeholders below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Want to use another social API with your Arduino Yun? We've got Facebook, - Google+, Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. -const String TWITTER_ACCESS_TOKEN = "your-twitter-access-token"; -const String TWITTER_ACCESS_TOKEN_SECRET = "your-twitter-access-token-secret"; -const String TWITTER_CONSUMER_KEY = "your-twitter-consumer-key"; -const String TWITTER_CONSUMER_SECRET = "your-twitter-consumer-secret"; - -int numRuns = 1; // execution count, so this sketch doesn't run forever -int maxRuns = 3; // the max number of times the Twitter Update Choreo should run - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the tweet if we haven't already sent it successfully - if (numRuns <= maxRuns) { - - Serial.println("Running SendATweet - Run #" + String(numRuns++) + "..."); - - // define the text of the tweet we want to send - String tweetText("My Arduino Yun has been running for " + String(millis()) + " milliseconds."); - - - TembooChoreo StatusesUpdateChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - StatusesUpdateChoreo.begin(); - - // set Temboo account credentials - StatusesUpdateChoreo.setAccountName(TEMBOO_ACCOUNT); - StatusesUpdateChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - StatusesUpdateChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twitter > Tweets > StatusesUpdate) - StatusesUpdateChoreo.setChoreo("/Library/Twitter/Tweets/StatusesUpdate"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twitter/Tweets/StatusesUpdate/ - // for complete details about the inputs for this Choreo - - // add the Twitter account information - StatusesUpdateChoreo.addInput("AccessToken", TWITTER_ACCESS_TOKEN); - StatusesUpdateChoreo.addInput("AccessTokenSecret", TWITTER_ACCESS_TOKEN_SECRET); - StatusesUpdateChoreo.addInput("ConsumerKey", TWITTER_CONSUMER_KEY); - StatusesUpdateChoreo.addInput("ConsumerSecret", TWITTER_CONSUMER_SECRET); - - // and the tweet we want to send - StatusesUpdateChoreo.addInput("StatusUpdate", tweetText); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = StatusesUpdateChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! Tweet sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (StatusesUpdateChoreo.available()) { - char c = StatusesUpdateChoreo.read(); - Serial.print(c); - } - } - StatusesUpdateChoreo.close(); - - // do nothing for the next 90 seconds - Serial.println("Waiting..."); - delay(90000); - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/SendATweet/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino b/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino deleted file mode 100644 index 4f841f8..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnEmail/SendAnEmail.ino +++ /dev/null @@ -1,137 +0,0 @@ -/* - SendAnEmail - - Demonstrates sending an email via a Google Gmail account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Gmail to send the email, you'll also need a valid - Google Gmail account. The sketch needs the username and password you use - to log into your Gmail account - substitute the placeholders below for these values. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// your Gmail username, formatted as a complete email address, eg "bob.smith@gmail.com" -const String GMAIL_USER_NAME = "xxxxxxxxxx"; - -// your Gmail password -const String GMAIL_PASSWORD = "xxxxxxxxxx"; - -// the email address you want to send the email to, eg "jane.doe@temboo.com" -const String TO_EMAIL_ADDRESS = "xxxxxxxxxx"; - -// a flag to indicate whether we've tried to send the email yet or not -boolean attempted = false; - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the email if we haven't already tried - if (!attempted) { - - Serial.println("Running SendAnEmail..."); - - TembooChoreo SendEmailChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked, and repopulated with - // appropriate arguments, each time its run() method is called. - SendEmailChoreo.begin(); - - // set Temboo account credentials - SendEmailChoreo.setAccountName(TEMBOO_ACCOUNT); - SendEmailChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SendEmailChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Google > Gmail > SendEmail) - SendEmailChoreo.setChoreo("/Library/Google/Gmail/SendEmail"); - - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Google/Gmail/SendEmail/ - // for complete details about the inputs for this Choreo - - // the first input is your Gmail email address. - SendEmailChoreo.addInput("Username", GMAIL_USER_NAME); - // next is your Gmail password. - SendEmailChoreo.addInput("Password", GMAIL_PASSWORD); - // who to send the email to - SendEmailChoreo.addInput("ToAddress", TO_EMAIL_ADDRESS); - // then a subject line - SendEmailChoreo.addInput("Subject", "ALERT: Greenhouse Temperature"); - - // next comes the message body, the main content of the email - SendEmailChoreo.addInput("MessageBody", "Hey! The greenhouse is too cold!"); - - // tell the Choreo to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SendEmailChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! Email sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (SendEmailChoreo.available()) { - char c = SendEmailChoreo.read(); - Serial.print(c); - } - } - SendEmailChoreo.close(); - - // set the flag showing we've tried - attempted = true; - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h deleted file mode 100644 index c58b447..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnEmail/TembooAccount.h +++ /dev/null @@ -1,4 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino b/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino deleted file mode 100644 index 2b0cfb1..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnSMS/SendAnSMS.ino +++ /dev/null @@ -1,154 +0,0 @@ -/* - SendAnSMS - - Demonstrates sending an SMS via Twilio using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses Twilio to send the SMS, you'll also need a valid - Twilio account. You can create one for free at https://www.twilio.com. - - The sketch needs your Twilio phone number, along with - the Account SID and Auth Token you get when you register with Twilio. - Make sure to use the Account SID and Auth Token from your Twilio Dashboard - (not your test credentials from the Dev Tools panel). - - Also note that if you're using a free Twilio account, you'll need to verify - the phone number to which messages are being sent by going to twilio.com and following - the instructions under the "Numbers > Verified Caller IDs" tab (this restriction - doesn't apply if you have a paid Twilio account). - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// the Account SID from your Twilio account -const String TWILIO_ACCOUNT_SID = "xxxxxxxxxx"; - -// the Auth Token from your Twilio account -const String TWILIO_AUTH_TOKEN = "xxxxxxxxxx"; - -// your Twilio phone number, e.g., "+1 555-222-1212" -const String TWILIO_NUMBER = "xxxxxxxxxx"; - -// the number to which the SMS should be sent, e.g., "+1 555-222-1212" -const String RECIPIENT_NUMBER = "xxxxxxxxxx"; - -// a flag to indicate whether we've attempted to send the SMS yet or not -boolean attempted = false; - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - - Bridge.begin(); -} - -void loop() -{ - // only try to send the SMS if we haven't already sent it successfully - if (!attempted) { - - Serial.println("Running SendAnSMS..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo SendSMSChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - SendSMSChoreo.begin(); - - // set Temboo account credentials - SendSMSChoreo.setAccountName(TEMBOO_ACCOUNT); - SendSMSChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SendSMSChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Twilio > SMSMessages > SendSMS) - SendSMSChoreo.setChoreo("/Library/Twilio/SMSMessages/SendSMS"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Twilio/SMSMessages/SendSMS/ - // for complete details about the inputs for this Choreo - - // the first input is a your AccountSID - SendSMSChoreo.addInput("AccountSID", TWILIO_ACCOUNT_SID); - - // next is your Auth Token - SendSMSChoreo.addInput("AuthToken", TWILIO_AUTH_TOKEN); - - // next is your Twilio phone number - SendSMSChoreo.addInput("From", TWILIO_NUMBER); - - // next, what number to send the SMS to - SendSMSChoreo.addInput("To", RECIPIENT_NUMBER); - - // finally, the text of the message to send - SendSMSChoreo.addInput("Body", "Hey, there! This is a message from your Arduino Yun!"); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SendSMSChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! SMS sent!"); - } else { - // a non-zero return code means there was an error - // read and print the error message - while (SendSMSChoreo.available()) { - char c = SendSMSChoreo.read(); - Serial.print(c); - } - } - SendSMSChoreo.close(); - - // set the flag indicatine we've tried once. - attempted=true; - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/SendAnSMS/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino deleted file mode 100644 index 1f1b6b4..0000000 --- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/SendDataToGoogleSpreadsheet.ino +++ /dev/null @@ -1,178 +0,0 @@ -/* - SendDataToGoogleSpreadsheet - - Demonstrates appending a row of data to a Google spreadsheet using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - Since this sketch uses a Google spreadsheet, you'll also need a - Google account: substitute the placeholders below for your Google account values. - - This example assumes basic familiarity with Arduino sketches, and that your - Yun is connected to the Internet. - - The columns in your spreadsheet must have labels for the Choreo to - work properly. It doesn't matter what the column labels actually are, - but there must be text in the first row of each column. This example - assumes there are two columns. The first column is the time (in milliseconds) - that the row was appended, and the second column is a sensor value. - In other words, your spreadsheet should look like: - - Time | Sensor Value | - ------+----------------- - | | - - NOTE that the first time you run this sketch, you may receive a warning from - Google, prompting you to authorize access from a 3rd party system. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. - -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information, - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -const String GOOGLE_USERNAME = "your-google-username"; -const String GOOGLE_PASSWORD = "your-google-password"; - -// the title of the spreadsheet you want to send data to -// (Note that this must actually be the title of a Google spreadsheet -// that exists in your Google Drive/Docs account, and is configured -// as described above.) -const String SPREADSHEET_TITLE = "your-spreadsheet-title"; - -const unsigned long RUN_INTERVAL_MILLIS = 60000; // how often to run the Choreo (in milliseconds) - -// the last time we ran the Choreo -// (initialized to 60 seconds ago so the -// Choreo is run immediately when we start up) -unsigned long lastRun = (unsigned long)-60000; - -void setup() { - - // for debugging, wait until a serial console is connected - Serial.begin(9600); - delay(4000); - while(!Serial); - - Serial.print("Initializing the bridge..."); - Bridge.begin(); - Serial.println("Done"); -} - -void loop() -{ - // get the number of milliseconds this sketch has been running - unsigned long now = millis(); - - // run again if it's been 60 seconds since we last ran - if (now - lastRun >= RUN_INTERVAL_MILLIS) { - - // remember 'now' as the last time we ran the choreo - lastRun = now; - - Serial.println("Getting sensor value..."); - - // get the value we want to append to our spreadsheet - unsigned long sensorValue = getSensorValue(); - - Serial.println("Appending value to spreadsheet..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo AppendRowChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - AppendRowChoreo.begin(); - - // set Temboo account credentials - AppendRowChoreo.setAccountName(TEMBOO_ACCOUNT); - AppendRowChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - AppendRowChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Google > Spreadsheets > AppendRow) - AppendRowChoreo.setChoreo("/Library/Google/Spreadsheets/AppendRow"); - - // set the required Choreo inputs - // see https://www.temboo.com/library/Library/Google/Spreadsheets/AppendRow/ - // for complete details about the inputs for this Choreo - - // your Google username (usually your email address) - AppendRowChoreo.addInput("Username", GOOGLE_USERNAME); - - // your Google account password - AppendRowChoreo.addInput("Password", GOOGLE_PASSWORD); - - // the title of the spreadsheet you want to append to - // NOTE: substitute your own value, retaining the "SpreadsheetTitle:" prefix. - AppendRowChoreo.addInput("SpreadsheetTitle", SPREADSHEET_TITLE); - - // convert the time and sensor values to a comma separated string - String rowData(now); - rowData += ","; - rowData += sensorValue; - - // add the RowData input item - AppendRowChoreo.addInput("RowData", rowData); - - // run the Choreo and wait for the results - // The return code (returnCode) will indicate success or failure - unsigned int returnCode = AppendRowChoreo.run(); - - // return code of zero (0) means success - if (returnCode == 0) { - Serial.println("Success! Appended " + rowData); - Serial.println(""); - } else { - // return code of anything other than zero means failure - // read and display any error messages - while (AppendRowChoreo.available()) { - char c = AppendRowChoreo.read(); - Serial.print(c); - } - } - - AppendRowChoreo.close(); - } -} - -// this function simulates reading the value of a sensor -unsigned long getSensorValue() { - return analogRead(A0); -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h b/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/SendDataToGoogleSpreadsheet/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino b/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino deleted file mode 100644 index 3b7f1d1..0000000 --- a/libraries/Bridge/examples/Temboo/ToxicFacilitiesSearch/ToxicFacilitiesSearch.ino +++ /dev/null @@ -1,171 +0,0 @@ -/* - ToxicFacilitiesSearch - - Demonstrates making a request to the Envirofacts API using Temboo from an Arduino Yun. - This example retrieves the names and addresses of EPA-regulated facilities in the - Toxins Release Inventory (TRI) database within a given zip code. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - -// the zip code to search for toxin-emitting facilities -String US_ZIP_CODE = "11215"; - -int numRuns = 1; // execution count, so that this doesn't run forever -int maxRuns = 10; // max number of times the Envirofacts FacilitiesSearch Choreo should be run - -void setup() { - Serial.begin(9600); - - // for debugging, wait until a serial console is connected - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() -{ - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running ToxicFacilitiesSearch - Run #" + String(numRuns++) + "..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo FacilitiesSearchByZipChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - FacilitiesSearchByZipChoreo.begin(); - - // set Temboo account credentials - FacilitiesSearchByZipChoreo.setAccountName(TEMBOO_ACCOUNT); - FacilitiesSearchByZipChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - FacilitiesSearchByZipChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (EnviroFacts > Toxins > FacilitiesSearchByZip) - FacilitiesSearchByZipChoreo.setChoreo("/Library/EnviroFacts/Toxins/FacilitiesSearchByZip"); - - // set choreo inputs; in this case, the US zip code for which to retrieve toxin release data - // the Temboo client provides standardized calls to 100+ cloud APIs - FacilitiesSearchByZipChoreo.addInput("Zip", US_ZIP_CODE); - - // specify two output filters, to help simplify the Envirofacts API results. - // see the tutorials on using Temboo SDK output filters at http://www.temboo.com/arduino - FacilitiesSearchByZipChoreo.addOutputFilter("fac", "FACILITY_NAME", "Response"); - - FacilitiesSearchByZipChoreo.addOutputFilter("addr", "STREET_ADDRESS", "Response"); - - // run the choreo - unsigned int returnCode = FacilitiesSearchByZipChoreo.run(); - if (returnCode == 0) { - String facilities; - String addresses; - - // when the choreo results are available, process them. - // the output filters we specified will return comma delimited - // lists containing the name and street address of the facilities - // located in the specified zip code. - while(FacilitiesSearchByZipChoreo.available()) { - String name = FacilitiesSearchByZipChoreo.readStringUntil('\x1F'); - name.trim(); - - String data = FacilitiesSearchByZipChoreo.readStringUntil('\x1E'); - data.trim(); - - if (name == "fac") { - facilities = data; - } else if (name == "addr") { - addresses = data; - } - } - FacilitiesSearchByZipChoreo.close(); - - // parse the comma delimited lists of facilities to join the - // name with the address and print it to the serial monitor - if (facilities.length() > 0) { - int i = -1; - int facilityStart = 0; - int addressStart = 0; - String facility; - String address; - do { - i = facilities.indexOf(',', facilityStart); - if (i >= 0) { - facility = facilities.substring(facilityStart, i); - facilityStart = i + 1; - } - - i = addresses.indexOf(',', addressStart); - if (i >= 0) { - address = addresses.substring(addressStart, i); - addressStart = i + 1; - } - - if (i >= 0) { - printResult(facility, address); - } - - }while (i >= 0); - facility = facilities.substring(facilityStart); - address = addresses.substring(addressStart); - printResult(facility, address); - } else { - Serial.println("No facilities found in zip code " + US_ZIP_CODE); - } - } else { - while(FacilitiesSearchByZipChoreo.available()) { - char c = FacilitiesSearchByZipChoreo.read(); - Serial.print(c); - } - } - } - Serial.println("Waiting..."); - Serial.println(""); - delay(30000); // wait 30 seconds between calls -} - -// a simple utility function, to output the facility name and address in the serial monitor. -void printResult(String facility, String address) { - Serial.print(facility); - Serial.print(" - "); - Serial.println(address); -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino b/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino deleted file mode 100644 index dd8cabd..0000000 --- a/libraries/Bridge/examples/Temboo/UpdateFacebookStatus/UpdateFacebookStatus.ino +++ /dev/null @@ -1,132 +0,0 @@ -/* - UpdateFacebookStatus - - Demonstrates sending a Facebook status update using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - In order to run this sketch, you'll need to register an application using - the Facebook dev console at https://developers.facebook.com/apps -- after creating - the app, log in to Temboo and visit https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/ - to use our OAuth Wizard (or OAuth Choreos) to obtain a Facebook access token. - Substitute your access token for the placeholder value of FACEBOOK_ACCESS_TOKEN below. - - This example assumes basic familiarity with Arduino sketches, and that your Yun - is connected to the Internet. - - Want to use another social API with your Arduino Yun? We've got Twitter, Google+, - Instagram, Tumblr and more in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information, - // as described in the footer comment below - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use a #define statement to specify this value in a .h file. - -// the Facebook Access Token, which can be obtained using the Temboo OAuth Wizard or Choreos -const String FACEBOOK_ACCESS_TOKEN = "xxxxxxxxxx"; - - -int numRuns = 1; // execution count, so this sketch doesn't run forever -int maxRuns = 10; // the max number of times the Facebook SetStatus Choreo should run - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() { - // while we haven't reached the max number of runs... - if (numRuns <= maxRuns) { - - // print status - Serial.println("Running UpdateFacebookStatus - Run #" + String(numRuns++) + "..."); - - // Define the status message we want to post on Facebook; since Facebook - // doesn't allow duplicate status messages, we'll include a changing value. - String statusMsg = "My Arduino Yun has been running for " + String(millis()) + " milliseconds!"; - - // define the Process that will be used to call the "temboo" client - TembooChoreo SetStatusChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - SetStatusChoreo.begin(); - - // set Temboo account credentials - SetStatusChoreo.setAccountName(TEMBOO_ACCOUNT); - SetStatusChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - SetStatusChoreo.setAppKey(TEMBOO_APP_KEY); - - // tell the Temboo client which Choreo to run (Facebook > Publishing > SetStatus) - SetStatusChoreo.setChoreo("/Library/Facebook/Publishing/SetStatus"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Facebook/Publishing/SetStatus/ - // for complete details about the inputs for this Choreo - - SetStatusChoreo.addInput("AccessToken", FACEBOOK_ACCESS_TOKEN); - SetStatusChoreo.addInput("Message", statusMsg); - - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = SetStatusChoreo.run(); - - // print the response code and API response. - Serial.println("Response code: " + String(returnCode)); - - // note that in this case, we're just printing the raw response from Facebook. - // see the examples on using Temboo SDK output filters at http://www.temboo.com/arduino - // for information on how to filter this data - while(SetStatusChoreo.available()) { - char c = SetStatusChoreo.read(); - Serial.print(c); - } - - SetStatusChoreo.close(); - } - - Serial.println("Waiting..."); - Serial.println(""); - - delay(30000); // wait 30 seconds between SetStatus calls -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h b/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h deleted file mode 100644 index 8d7dcfb..0000000 --- a/libraries/Bridge/examples/Temboo/UploadToDropbox/TembooAccount.h +++ /dev/null @@ -1,5 +0,0 @@ -#define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name -#define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name -#define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - diff --git a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino b/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino deleted file mode 100644 index 744dcdb..0000000 --- a/libraries/Bridge/examples/Temboo/UploadToDropbox/UploadToDropbox.ino +++ /dev/null @@ -1,208 +0,0 @@ -/* - UploadToDropbox - - Demonstrates uploading a file to a Dropbox account using Temboo from an Arduino Yun. - - Check out the latest Arduino & Temboo examples and support docs at http://www.temboo.com/arduino - - A Temboo account and application key are necessary to run all Temboo examples. - If you don't already have one, you can register for a free Temboo account at - http://www.temboo.com - - You'll also need a valid Dropbox app and accompanying OAuth credentials. - To create a Dropbox app, visit https://www.dropbox.com/developers/apps and - do the following: - - 1. Create a "Dropbox API app" - 2. Select "Files and datastores" - 3. Select "Yes - my app only needs access to the files it creates." - - Once you've created your app, follow the instructions at - https://www.temboo.com/library/Library/Dropbox/OAuth/ to run the Initialize and Finalize - OAuth Choreos. These Choreos complete the OAuth handshake and retrieve your Dropbox OAuth access tokens. - - This example assumes basic familiarity with Arduino sketches, and that your Yun is connected - to the Internet. - - Looking for another API to use with your Arduino Yun? We've got over 100 in our Library! - - This example code is in the public domain. -*/ - -#include -#include -#include "TembooAccount.h" // contains Temboo account information - // as described in the footer comment below - - -/*** SUBSTITUTE YOUR VALUES BELOW: ***/ - -// Note that for additional security and reusability, you could -// use #define statements to specify these values in a .h file. - -// your Dropbox app key, available on the Dropbox developer console after registering an app -const String DROPBOX_APP_KEY = "xxxxxxxxxx"; - -// your Dropbox app secret, available on the Dropbox developer console after registering an app -const String DROPBOX_APP_SECRET = "xxxxxxxxxx"; - -// your Dropbox access token, which is returned by the FinalizeOAuth Choreo -const String DROPBOX_ACCESS_TOKEN = "xxxxxxxxxx"; - -// your Dropbox access token secret, which is returned by the FinalizeOAuth Choreo -const String DROPBOX_ACCESS_TOKEN_SECRET = "xxxxxxxxxx"; - - -boolean success = false; // a flag to indicate whether we've uploaded the file yet - -void setup() { - Serial.begin(9600); - - // For debugging, wait until a serial console is connected. - delay(4000); - while(!Serial); - Bridge.begin(); -} - -void loop() -{ - // only try to upload the file if we haven't already done so - if (!success) { - - Serial.println("Base64 encoding data to upload..."); - - // base64 encode the data to upload - String base64EncodedData = base64Encode("Hello, Arduino!"); - - - Serial.println("Uploading data to Dropbox..."); - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo UploadFileChoreo; - - // invoke the Temboo client - // NOTE that the client must be reinvoked and repopulated with - // appropriate arguments each time its run() method is called. - UploadFileChoreo.begin(); - - // set Temboo account credentials - UploadFileChoreo.setAccountName(TEMBOO_ACCOUNT); - UploadFileChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - UploadFileChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Dropbox > FilesAndMetadata > UploadFile) - UploadFileChoreo.setChoreo("/Library/Dropbox/FilesAndMetadata/UploadFile"); - - // set the required choreo inputs - // see https://www.temboo.com/library/Library/Dropbox/FilesAndMetadata/UploadFile/ - // for complete details about the inputs for this Choreo - - // first specify the name of the file to create/update on Dropbox - UploadFileChoreo.addInput("FileName", "ArduinoTest.txt"); - - // next, the root folder on Dropbox relative to which the file path is specified. - // to work with the Dropbox app you created earlier, this should be left as "sandbox" - // if your Dropbox app has full access to your files, specify "dropbox" - UploadFileChoreo.addInput("Root","sandbox"); - - // next, the Base64 encoded file data to upload - UploadFileChoreo.addInput("FileContents", base64EncodedData); - - // finally, the Dropbox OAuth credentials defined above - UploadFileChoreo.addInput("AppSecret", DROPBOX_APP_SECRET); - UploadFileChoreo.addInput("AccessToken", DROPBOX_ACCESS_TOKEN); - UploadFileChoreo.addInput("AccessTokenSecret", DROPBOX_ACCESS_TOKEN_SECRET); - UploadFileChoreo.addInput("AppKey", DROPBOX_APP_KEY); - - // tell the Process to run and wait for the results. The - // return code (returnCode) will tell us whether the Temboo client - // was able to send our request to the Temboo servers - unsigned int returnCode = UploadFileChoreo.run(); - - // a return code of zero (0) means everything worked - if (returnCode == 0) { - Serial.println("Success! File uploaded!"); - success = true; - } else { - // a non-zero return code means there was an error - Serial.println("Uh-oh! Something went wrong!"); - } - - // print out the full response to the serial monitor in all - // cases, just for debugging - while (UploadFileChoreo.available()) { - char c = UploadFileChoreo.read(); - Serial.print(c); - } - UploadFileChoreo.close(); - - Serial.println("Waiting..."); - } - - delay(30000); // wait 30 seconds between upload attempts -} - - -/* - A utility function to Base64 encode the specified string - by calling a Temboo Utilities Choreo. -*/ -String base64Encode(String toEncode) { - - // we need a Process object to send a Choreo request to Temboo - TembooChoreo Base64EncodeChoreo; - - // invoke the Temboo client - Base64EncodeChoreo.begin(); - - // set Temboo account credentials - Base64EncodeChoreo.setAccountName(TEMBOO_ACCOUNT); - Base64EncodeChoreo.setAppKeyName(TEMBOO_APP_KEY_NAME); - Base64EncodeChoreo.setAppKey(TEMBOO_APP_KEY); - - // identify the Temboo Library choreo to run (Utilities > Encoding > Base64Encode) - Base64EncodeChoreo.setChoreo("/Library/Utilities/Encoding/Base64Encode"); - - // set choreo inputs - Base64EncodeChoreo.addInput("Text", toEncode); - - // run the choreo - Base64EncodeChoreo.run(); - - // read in the choreo results, and return the "Base64EncodedText" output value. - // see http://www.temboo.com/arduino for more details on using choreo outputs. - while(Base64EncodeChoreo.available()) { - // read the name of the output item - String name = Base64EncodeChoreo.readStringUntil('\x1F'); - name.trim(); - - // read the value of the output item - String data = Base64EncodeChoreo.readStringUntil('\x1E'); - data.trim(); - - if(name == "Base64EncodedText") { - return data; - } - } -} - -/* - IMPORTANT NOTE: TembooAccount.h: - - TembooAccount.h is a file referenced by this sketch that contains your Temboo account information. - You'll need to edit the placeholder version of TembooAccount.h included with this example sketch, - by inserting your own Temboo account name and app key information. The contents of the file should - look like: - - #define TEMBOO_ACCOUNT "myTembooAccountName" // your Temboo account name - #define TEMBOO_APP_KEY_NAME "myFirstApp" // your Temboo app key name - #define TEMBOO_APP_KEY "xxx-xxx-xxx-xx-xxx" // your Temboo app key - - You can find your Temboo App Key information on the Temboo website, - under My Account > Application Keys - - The same TembooAccount.h file settings can be used for all Temboo SDK sketches. - - Keeping your account information in a separate file means you can share the main .ino file without worrying - that you forgot to delete your credentials. -*/ diff --git a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino b/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino deleted file mode 100644 index 2149737..0000000 --- a/libraries/Bridge/examples/TemperatureWebPanel/TemperatureWebPanel.ino +++ /dev/null @@ -1,121 +0,0 @@ -/* - Temperature web interface - - This example shows how to serve data from an analog input - via the Arduino Yún's built-in webserver using the Bridge library. - - The circuit: - * TMP36 temperature sensor on analog pin A1 - * SD card attached to SD card slot of the Arduino Yún - - Prepare your SD card with an empty folder in the SD root - named "arduino" and a subfolder of that named "www". - This will ensure that the Yún will create a link - to the SD to the "/mnt/sd" path. - - In this sketch folder is a basic webpage and a copy of zepto.js, a - minimized version of jQuery. When you upload your sketch, these files - will be placed in the /arduino/www/TemperatureWebPanel folder on your SD card. - - You can then go to http://arduino.local/sd/TemperatureWebPanel - to see the output of this sketch. - - You can remove the SD card while the Linux and the - sketch are running but be careful not to remove it while - the system is writing to it. - - created 6 July 2013 - by Tom Igoe - - - This example code is in the public domain. - - */ -#include -#include -#include - -// Listen on default port 5555, the webserver on the Yun -// will forward there all the HTTP requests for us. -YunServer server; -String startString; -long hits = 0; - -void setup() { - Serial.begin(9600); - - // Bridge startup - pinMode(13,OUTPUT); - digitalWrite(13, LOW); - Bridge.begin(); - digitalWrite(13, HIGH); - - // using A0 and A2 as vcc and gnd for the TMP36 sensor: - pinMode(A0, OUTPUT); - pinMode(A2, OUTPUT); - digitalWrite(A0, HIGH); - digitalWrite(A2, LOW); - - // Listen for incoming connection only from localhost - // (no one from the external network could connect) - server.listenOnLocalhost(); - server.begin(); - - // get the time that this sketch started: - Process startTime; - startTime.runShellCommand("date"); - while(startTime.available()) { - char c = startTime.read(); - startString += c; - } -} - -void loop() { - // Get clients coming from server - YunClient client = server.accept(); - - // There is a new client? - if (client) { - // read the command - String command = client.readString(); - command.trim(); //kill whitespace - Serial.println(command); - // is "temperature" command? - if (command == "temperature") { - - // get the time from the server: - Process time; - time.runShellCommand("date"); - String timeString = ""; - while(time.available()) { - char c = time.read(); - timeString += c; - } - Serial.println(timeString); - int sensorValue = analogRead(A1); - // convert the reading to millivolts: - float voltage = sensorValue * (5000/ 1024); - // convert the millivolts to temperature celsius: - float temperature = (voltage - 500)/10; - // print the temperature: - client.print("Current time on the Yún: "); - client.println(timeString); - client.print("
Current temperature: "); - client.print(temperature); - client.print(" degrees C"); - client.print("
This sketch has been running since "); - client.print(startString); - client.print("
Hits so far: "); - client.print(hits); - } - - // Close connection and free resources. - client.stop(); - hits++; - } - - delay(50); // Poll every 50ms -} - - - diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/index.html b/libraries/Bridge/examples/TemperatureWebPanel/www/index.html deleted file mode 100755 index c6b6747..0000000 --- a/libraries/Bridge/examples/TemperatureWebPanel/www/index.html +++ /dev/null @@ -1,16 +0,0 @@ - - - - - - - - - 0 - - - diff --git a/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js b/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js deleted file mode 100755 index dbe4e3c..0000000 --- a/libraries/Bridge/examples/TemperatureWebPanel/www/zepto.min.js +++ /dev/null @@ -1,2 +0,0 @@ -/* Zepto v1.0-1-ga3cab6c - polyfill zepto detect event ajax form fx - zeptojs.com/license */ -(function(a){String.prototype.trim===a&&(String.prototype.trim=function(){return this.replace(/^\s+|\s+$/g,"")}),Array.prototype.reduce===a&&(Array.prototype.reduce=function(b){if(this===void 0||this===null)throw new TypeError;var c=Object(this),d=c.length>>>0,e=0,f;if(typeof b!="function")throw new TypeError;if(d==0&&arguments.length==1)throw new TypeError;if(arguments.length>=2)f=arguments[1];else do{if(e in c){f=c[e++];break}if(++e>=d)throw new TypeError}while(!0);while(e0?c.fn.concat.apply([],a):a}function O(a){return a.replace(/::/g,"/").replace(/([A-Z]+)([A-Z][a-z])/g,"$1_$2").replace(/([a-z\d])([A-Z])/g,"$1_$2").replace(/_/g,"-").toLowerCase()}function P(a){return a in j?j[a]:j[a]=new RegExp("(^|\\s)"+a+"(\\s|$)")}function Q(a,b){return typeof b=="number"&&!l[O(a)]?b+"px":b}function R(a){var b,c;return i[a]||(b=h.createElement(a),h.body.appendChild(b),c=k(b,"").getPropertyValue("display"),b.parentNode.removeChild(b),c=="none"&&(c="block"),i[a]=c),i[a]}function S(a){return"children"in a?f.call(a.children):c.map(a.childNodes,function(a){if(a.nodeType==1)return a})}function T(c,d,e){for(b in d)e&&(J(d[b])||K(d[b]))?(J(d[b])&&!J(c[b])&&(c[b]={}),K(d[b])&&!K(c[b])&&(c[b]=[]),T(c[b],d[b],e)):d[b]!==a&&(c[b]=d[b])}function U(b,d){return d===a?c(b):c(b).filter(d)}function V(a,b,c,d){return F(b)?b.call(a,c,d):b}function W(a,b,c){c==null?a.removeAttribute(b):a.setAttribute(b,c)}function X(b,c){var d=b.className,e=d&&d.baseVal!==a;if(c===a)return e?d.baseVal:d;e?d.baseVal=c:b.className=c}function Y(a){var b;try{return a?a=="true"||(a=="false"?!1:a=="null"?null:isNaN(b=Number(a))?/^[\[\{]/.test(a)?c.parseJSON(a):a:b):a}catch(d){return a}}function Z(a,b){b(a);for(var c in a.childNodes)Z(a.childNodes[c],b)}var a,b,c,d,e=[],f=e.slice,g=e.filter,h=window.document,i={},j={},k=h.defaultView.getComputedStyle,l={"column-count":1,columns:1,"font-weight":1,"line-height":1,opacity:1,"z-index":1,zoom:1},m=/^\s*<(\w+|!)[^>]*>/,n=/<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\w:]+)[^>]*)\/>/ig,o=/^(?:body|html)$/i,p=["val","css","html","text","data","width","height","offset"],q=["after","prepend","before","append"],r=h.createElement("table"),s=h.createElement("tr"),t={tr:h.createElement("tbody"),tbody:r,thead:r,tfoot:r,td:s,th:s,"*":h.createElement("div")},u=/complete|loaded|interactive/,v=/^\.([\w-]+)$/,w=/^#([\w-]*)$/,x=/^[\w-]+$/,y={},z=y.toString,A={},B,C,D=h.createElement("div");return A.matches=function(a,b){if(!a||a.nodeType!==1)return!1;var c=a.webkitMatchesSelector||a.mozMatchesSelector||a.oMatchesSelector||a.matchesSelector;if(c)return c.call(a,b);var d,e=a.parentNode,f=!e;return f&&(e=D).appendChild(a),d=~A.qsa(e,b).indexOf(a),f&&D.removeChild(a),d},B=function(a){return a.replace(/-+(.)?/g,function(a,b){return b?b.toUpperCase():""})},C=function(a){return g.call(a,function(b,c){return a.indexOf(b)==c})},A.fragment=function(b,d,e){b.replace&&(b=b.replace(n,"<$1>")),d===a&&(d=m.test(b)&&RegExp.$1),d in t||(d="*");var g,h,i=t[d];return i.innerHTML=""+b,h=c.each(f.call(i.childNodes),function(){i.removeChild(this)}),J(e)&&(g=c(h),c.each(e,function(a,b){p.indexOf(a)>-1?g[a](b):g.attr(a,b)})),h},A.Z=function(a,b){return a=a||[],a.__proto__=c.fn,a.selector=b||"",a},A.isZ=function(a){return a instanceof A.Z},A.init=function(b,d){if(!b)return A.Z();if(F(b))return c(h).ready(b);if(A.isZ(b))return b;var e;if(K(b))e=M(b);else if(I(b))e=[J(b)?c.extend({},b):b],b=null;else if(m.test(b))e=A.fragment(b.trim(),RegExp.$1,d),b=null;else{if(d!==a)return c(d).find(b);e=A.qsa(h,b)}return A.Z(e,b)},c=function(a,b){return A.init(a,b)},c.extend=function(a){var b,c=f.call(arguments,1);return typeof a=="boolean"&&(b=a,a=c.shift()),c.forEach(function(c){T(a,c,b)}),a},A.qsa=function(a,b){var c;return H(a)&&w.test(b)?(c=a.getElementById(RegExp.$1))?[c]:[]:a.nodeType!==1&&a.nodeType!==9?[]:f.call(v.test(b)?a.getElementsByClassName(RegExp.$1):x.test(b)?a.getElementsByTagName(b):a.querySelectorAll(b))},c.contains=function(a,b){return a!==b&&a.contains(b)},c.type=E,c.isFunction=F,c.isWindow=G,c.isArray=K,c.isPlainObject=J,c.isEmptyObject=function(a){var b;for(b in a)return!1;return!0},c.inArray=function(a,b,c){return e.indexOf.call(b,a,c)},c.camelCase=B,c.trim=function(a){return a.trim()},c.uuid=0,c.support={},c.expr={},c.map=function(a,b){var c,d=[],e,f;if(L(a))for(e=0;e=0?b:b+this.length]},toArray:function(){return this.get()},size:function(){return this.length},remove:function(){return this.each(function(){this.parentNode!=null&&this.parentNode.removeChild(this)})},each:function(a){return e.every.call(this,function(b,c){return a.call(b,c,b)!==!1}),this},filter:function(a){return F(a)?this.not(this.not(a)):c(g.call(this,function(b){return A.matches(b,a)}))},add:function(a,b){return c(C(this.concat(c(a,b))))},is:function(a){return this.length>0&&A.matches(this[0],a)},not:function(b){var d=[];if(F(b)&&b.call!==a)this.each(function(a){b.call(this,a)||d.push(this)});else{var e=typeof b=="string"?this.filter(b):L(b)&&F(b.item)?f.call(b):c(b);this.forEach(function(a){e.indexOf(a)<0&&d.push(a)})}return c(d)},has:function(a){return this.filter(function(){return I(a)?c.contains(this,a):c(this).find(a).size()})},eq:function(a){return a===-1?this.slice(a):this.slice(a,+a+1)},first:function(){var a=this[0];return a&&!I(a)?a:c(a)},last:function(){var a=this[this.length-1];return a&&!I(a)?a:c(a)},find:function(a){var b,d=this;return typeof a=="object"?b=c(a).filter(function(){var a=this;return e.some.call(d,function(b){return c.contains(b,a)})}):this.length==1?b=c(A.qsa(this[0],a)):b=this.map(function(){return A.qsa(this,a)}),b},closest:function(a,b){var d=this[0],e=!1;typeof a=="object"&&(e=c(a));while(d&&!(e?e.indexOf(d)>=0:A.matches(d,a)))d=d!==b&&!H(d)&&d.parentNode;return c(d)},parents:function(a){var b=[],d=this;while(d.length>0)d=c.map(d,function(a){if((a=a.parentNode)&&!H(a)&&b.indexOf(a)<0)return b.push(a),a});return U(b,a)},parent:function(a){return U(C(this.pluck("parentNode")),a)},children:function(a){return U(this.map(function(){return S(this)}),a)},contents:function(){return this.map(function(){return f.call(this.childNodes)})},siblings:function(a){return U(this.map(function(a,b){return g.call(S(b.parentNode),function(a){return a!==b})}),a)},empty:function(){return this.each(function(){this.innerHTML=""})},pluck:function(a){return c.map(this,function(b){return b[a]})},show:function(){return this.each(function(){this.style.display=="none"&&(this.style.display=null),k(this,"").getPropertyValue("display")=="none"&&(this.style.display=R(this.nodeName))})},replaceWith:function(a){return this.before(a).remove()},wrap:function(a){var b=F(a);if(this[0]&&!b)var d=c(a).get(0),e=d.parentNode||this.length>1;return this.each(function(f){c(this).wrapAll(b?a.call(this,f):e?d.cloneNode(!0):d)})},wrapAll:function(a){if(this[0]){c(this[0]).before(a=c(a));var b;while((b=a.children()).length)a=b.first();c(a).append(this)}return this},wrapInner:function(a){var b=F(a);return this.each(function(d){var e=c(this),f=e.contents(),g=b?a.call(this,d):a;f.length?f.wrapAll(g):e.append(g)})},unwrap:function(){return this.parent().each(function(){c(this).replaceWith(c(this).children())}),this},clone:function(){return this.map(function(){return this.cloneNode(!0)})},hide:function(){return this.css("display","none")},toggle:function(b){return this.each(function(){var d=c(this);(b===a?d.css("display")=="none":b)?d.show():d.hide()})},prev:function(a){return c(this.pluck("previousElementSibling")).filter(a||"*")},next:function(a){return c(this.pluck("nextElementSibling")).filter(a||"*")},html:function(b){return b===a?this.length>0?this[0].innerHTML:null:this.each(function(a){var d=this.innerHTML;c(this).empty().append(V(this,b,a,d))})},text:function(b){return b===a?this.length>0?this[0].textContent:null:this.each(function(){this.textContent=b})},attr:function(c,d){var e;return typeof c=="string"&&d===a?this.length==0||this[0].nodeType!==1?a:c=="value"&&this[0].nodeName=="INPUT"?this.val():!(e=this[0].getAttribute(c))&&c in this[0]?this[0][c]:e:this.each(function(a){if(this.nodeType!==1)return;if(I(c))for(b in c)W(this,b,c[b]);else W(this,c,V(this,d,a,this.getAttribute(c)))})},removeAttr:function(a){return this.each(function(){this.nodeType===1&&W(this,a)})},prop:function(b,c){return c===a?this[0]&&this[0][b]:this.each(function(a){this[b]=V(this,c,a,this[b])})},data:function(b,c){var d=this.attr("data-"+O(b),c);return d!==null?Y(d):a},val:function(b){return b===a?this[0]&&(this[0].multiple?c(this[0]).find("option").filter(function(a){return this.selected}).pluck("value"):this[0].value):this.each(function(a){this.value=V(this,b,a,this.value)})},offset:function(a){if(a)return this.each(function(b){var d=c(this),e=V(this,a,b,d.offset()),f=d.offsetParent().offset(),g={top:e.top-f.top,left:e.left-f.left};d.css("position")=="static"&&(g.position="relative"),d.css(g)});if(this.length==0)return null;var b=this[0].getBoundingClientRect();return{left:b.left+window.pageXOffset,top:b.top+window.pageYOffset,width:Math.round(b.width),height:Math.round(b.height)}},css:function(a,c){if(arguments.length<2&&typeof a=="string")return this[0]&&(this[0].style[B(a)]||k(this[0],"").getPropertyValue(a));var d="";if(E(a)=="string")!c&&c!==0?this.each(function(){this.style.removeProperty(O(a))}):d=O(a)+":"+Q(a,c);else for(b in a)!a[b]&&a[b]!==0?this.each(function(){this.style.removeProperty(O(b))}):d+=O(b)+":"+Q(b,a[b])+";";return this.each(function(){this.style.cssText+=";"+d})},index:function(a){return a?this.indexOf(c(a)[0]):this.parent().children().indexOf(this[0])},hasClass:function(a){return e.some.call(this,function(a){return this.test(X(a))},P(a))},addClass:function(a){return this.each(function(b){d=[];var e=X(this),f=V(this,a,b,e);f.split(/\s+/g).forEach(function(a){c(this).hasClass(a)||d.push(a)},this),d.length&&X(this,e+(e?" ":"")+d.join(" "))})},removeClass:function(b){return this.each(function(c){if(b===a)return X(this,"");d=X(this),V(this,b,c,d).split(/\s+/g).forEach(function(a){d=d.replace(P(a)," ")}),X(this,d.trim())})},toggleClass:function(b,d){return this.each(function(e){var f=c(this),g=V(this,b,e,X(this));g.split(/\s+/g).forEach(function(b){(d===a?!f.hasClass(b):d)?f.addClass(b):f.removeClass(b)})})},scrollTop:function(){if(!this.length)return;return"scrollTop"in this[0]?this[0].scrollTop:this[0].scrollY},position:function(){if(!this.length)return;var a=this[0],b=this.offsetParent(),d=this.offset(),e=o.test(b[0].nodeName)?{top:0,left:0}:b.offset();return d.top-=parseFloat(c(a).css("margin-top"))||0,d.left-=parseFloat(c(a).css("margin-left"))||0,e.top+=parseFloat(c(b[0]).css("border-top-width"))||0,e.left+=parseFloat(c(b[0]).css("border-left-width"))||0,{top:d.top-e.top,left:d.left-e.left}},offsetParent:function(){return this.map(function(){var a=this.offsetParent||h.body;while(a&&!o.test(a.nodeName)&&c(a).css("position")=="static")a=a.offsetParent;return a})}},c.fn.detach=c.fn.remove,["width","height"].forEach(function(b){c.fn[b]=function(d){var e,f=this[0],g=b.replace(/./,function(a){return a[0].toUpperCase()});return d===a?G(f)?f["inner"+g]:H(f)?f.documentElement["offset"+g]:(e=this.offset())&&e[b]:this.each(function(a){f=c(this),f.css(b,V(this,d,a,f[b]()))})}}),q.forEach(function(a,b){var d=b%2;c.fn[a]=function(){var a,e=c.map(arguments,function(b){return a=E(b),a=="object"||a=="array"||b==null?b:A.fragment(b)}),f,g=this.length>1;return e.length<1?this:this.each(function(a,h){f=d?h:h.parentNode,h=b==0?h.nextSibling:b==1?h.firstChild:b==2?h:null,e.forEach(function(a){if(g)a=a.cloneNode(!0);else if(!f)return c(a).remove();Z(f.insertBefore(a,h),function(a){a.nodeName!=null&&a.nodeName.toUpperCase()==="SCRIPT"&&(!a.type||a.type==="text/javascript")&&!a.src&&window.eval.call(window,a.innerHTML)})})})},c.fn[d?a+"To":"insert"+(b?"Before":"After")]=function(b){return c(b)[a](this),this}}),A.Z.prototype=c.fn,A.uniq=C,A.deserializeValue=Y,c.zepto=A,c}();window.Zepto=Zepto,"$"in window||(window.$=Zepto),function(a){function b(a){var b=this.os={},c=this.browser={},d=a.match(/WebKit\/([\d.]+)/),e=a.match(/(Android)\s+([\d.]+)/),f=a.match(/(iPad).*OS\s([\d_]+)/),g=!f&&a.match(/(iPhone\sOS)\s([\d_]+)/),h=a.match(/(webOS|hpwOS)[\s\/]([\d.]+)/),i=h&&a.match(/TouchPad/),j=a.match(/Kindle\/([\d.]+)/),k=a.match(/Silk\/([\d._]+)/),l=a.match(/(BlackBerry).*Version\/([\d.]+)/),m=a.match(/(BB10).*Version\/([\d.]+)/),n=a.match(/(RIM\sTablet\sOS)\s([\d.]+)/),o=a.match(/PlayBook/),p=a.match(/Chrome\/([\d.]+)/)||a.match(/CriOS\/([\d.]+)/),q=a.match(/Firefox\/([\d.]+)/);if(c.webkit=!!d)c.version=d[1];e&&(b.android=!0,b.version=e[2]),g&&(b.ios=b.iphone=!0,b.version=g[2].replace(/_/g,".")),f&&(b.ios=b.ipad=!0,b.version=f[2].replace(/_/g,".")),h&&(b.webos=!0,b.version=h[2]),i&&(b.touchpad=!0),l&&(b.blackberry=!0,b.version=l[2]),m&&(b.bb10=!0,b.version=m[2]),n&&(b.rimtabletos=!0,b.version=n[2]),o&&(c.playbook=!0),j&&(b.kindle=!0,b.version=j[1]),k&&(c.silk=!0,c.version=k[1]),!k&&b.android&&a.match(/Kindle Fire/)&&(c.silk=!0),p&&(c.chrome=!0,c.version=p[1]),q&&(c.firefox=!0,c.version=q[1]),b.tablet=!!(f||o||e&&!a.match(/Mobile/)||q&&a.match(/Tablet/)),b.phone=!b.tablet&&!!(e||g||h||l||m||p&&a.match(/Android/)||p&&a.match(/CriOS\/([\d.]+)/)||q&&a.match(/Mobile/))}b.call(a,navigator.userAgent),a.__detect=b}(Zepto),function(a){function g(a){return a._zid||(a._zid=d++)}function h(a,b,d,e){b=i(b);if(b.ns)var f=j(b.ns);return(c[g(a)]||[]).filter(function(a){return a&&(!b.e||a.e==b.e)&&(!b.ns||f.test(a.ns))&&(!d||g(a.fn)===g(d))&&(!e||a.sel==e)})}function i(a){var b=(""+a).split(".");return{e:b[0],ns:b.slice(1).sort().join(" ")}}function j(a){return new RegExp("(?:^| )"+a.replace(" "," .* ?")+"(?: |$)")}function k(b,c,d){a.type(b)!="string"?a.each(b,d):b.split(/\s/).forEach(function(a){d(a,c)})}function l(a,b){return a.del&&(a.e=="focus"||a.e=="blur")||!!b}function m(a){return f[a]||a}function n(b,d,e,h,j,n){var o=g(b),p=c[o]||(c[o]=[]);k(d,e,function(c,d){var e=i(c);e.fn=d,e.sel=h,e.e in f&&(d=function(b){var c=b.relatedTarget;if(!c||c!==this&&!a.contains(this,c))return e.fn.apply(this,arguments)}),e.del=j&&j(d,c);var g=e.del||d;e.proxy=function(a){var c=g.apply(b,[a].concat(a.data));return c===!1&&(a.preventDefault(),a.stopPropagation()),c},e.i=p.length,p.push(e),b.addEventListener(m(e.e),e.proxy,l(e,n))})}function o(a,b,d,e,f){var i=g(a);k(b||"",d,function(b,d){h(a,b,d,e).forEach(function(b){delete c[i][b.i],a.removeEventListener(m(b.e),b.proxy,l(b,f))})})}function t(b){var c,d={originalEvent:b};for(c in b)!r.test(c)&&b[c]!==undefined&&(d[c]=b[c]);return a.each(s,function(a,c){d[a]=function(){return this[c]=p,b[a].apply(b,arguments)},d[c]=q}),d}function u(a){if(!("defaultPrevented"in a)){a.defaultPrevented=!1;var b=a.preventDefault;a.preventDefault=function(){this.defaultPrevented=!0,b.call(this)}}}var b=a.zepto.qsa,c={},d=1,e={},f={mouseenter:"mouseover",mouseleave:"mouseout"};e.click=e.mousedown=e.mouseup=e.mousemove="MouseEvents",a.event={add:n,remove:o},a.proxy=function(b,c){if(a.isFunction(b)){var d=function(){return b.apply(c,arguments)};return d._zid=g(b),d}if(typeof c=="string")return a.proxy(b[c],b);throw new TypeError("expected function")},a.fn.bind=function(a,b){return this.each(function(){n(this,a,b)})},a.fn.unbind=function(a,b){return this.each(function(){o(this,a,b)})},a.fn.one=function(a,b){return this.each(function(c,d){n(this,a,b,null,function(a,b){return function(){var c=a.apply(d,arguments);return o(d,b,a),c}})})};var p=function(){return!0},q=function(){return!1},r=/^([A-Z]|layer[XY]$)/,s={preventDefault:"isDefaultPrevented",stopImmediatePropagation:"isImmediatePropagationStopped",stopPropagation:"isPropagationStopped"};a.fn.delegate=function(b,c,d){return this.each(function(e,f){n(f,c,d,b,function(c){return function(d){var e,g=a(d.target).closest(b,f).get(0);if(g)return e=a.extend(t(d),{currentTarget:g,liveFired:f}),c.apply(g,[e].concat([].slice.call(arguments,1)))}})})},a.fn.undelegate=function(a,b,c){return this.each(function(){o(this,b,c,a)})},a.fn.live=function(b,c){return a(document.body).delegate(this.selector,b,c),this},a.fn.die=function(b,c){return a(document.body).undelegate(this.selector,b,c),this},a.fn.on=function(b,c,d){return!c||a.isFunction(c)?this.bind(b,c||d):this.delegate(c,b,d)},a.fn.off=function(b,c,d){return!c||a.isFunction(c)?this.unbind(b,c||d):this.undelegate(c,b,d)},a.fn.trigger=function(b,c){if(typeof b=="string"||a.isPlainObject(b))b=a.Event(b);return u(b),b.data=c,this.each(function(){"dispatchEvent"in this&&this.dispatchEvent(b)})},a.fn.triggerHandler=function(b,c){var d,e;return this.each(function(f,g){d=t(typeof b=="string"?a.Event(b):b),d.data=c,d.target=g,a.each(h(g,b.type||b),function(a,b){e=b.proxy(d);if(d.isImmediatePropagationStopped())return!1})}),e},"focusin focusout load resize scroll unload click dblclick mousedown mouseup mousemove mouseover mouseout mouseenter mouseleave change select keydown keypress keyup error".split(" ").forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.trigger(b)}}),["focus","blur"].forEach(function(b){a.fn[b]=function(a){return a?this.bind(b,a):this.each(function(){try{this[b]()}catch(a){}}),this}}),a.Event=function(a,b){typeof a!="string"&&(b=a,a=b.type);var c=document.createEvent(e[a]||"Events"),d=!0;if(b)for(var f in b)f=="bubbles"?d=!!b[f]:c[f]=b[f];return c.initEvent(a,d,!0,null,null,null,null,null,null,null,null,null,null,null,null),c.isDefaultPrevented=function(){return this.defaultPrevented},c}}(Zepto),function($){function triggerAndReturn(a,b,c){var d=$.Event(b);return $(a).trigger(d,c),!d.defaultPrevented}function triggerGlobal(a,b,c,d){if(a.global)return triggerAndReturn(b||document,c,d)}function ajaxStart(a){a.global&&$.active++===0&&triggerGlobal(a,null,"ajaxStart")}function ajaxStop(a){a.global&&!--$.active&&triggerGlobal(a,null,"ajaxStop")}function ajaxBeforeSend(a,b){var c=b.context;if(b.beforeSend.call(c,a,b)===!1||triggerGlobal(b,c,"ajaxBeforeSend",[a,b])===!1)return!1;triggerGlobal(b,c,"ajaxSend",[a,b])}function ajaxSuccess(a,b,c){var d=c.context,e="success";c.success.call(d,a,e,b),triggerGlobal(c,d,"ajaxSuccess",[b,c,a]),ajaxComplete(e,b,c)}function ajaxError(a,b,c,d){var e=d.context;d.error.call(e,c,b,a),triggerGlobal(d,e,"ajaxError",[c,d,a]),ajaxComplete(b,c,d)}function ajaxComplete(a,b,c){var d=c.context;c.complete.call(d,b,a),triggerGlobal(c,d,"ajaxComplete",[b,c]),ajaxStop(c)}function empty(){}function mimeToDataType(a){return a&&(a=a.split(";",2)[0]),a&&(a==htmlType?"html":a==jsonType?"json":scriptTypeRE.test(a)?"script":xmlTypeRE.test(a)&&"xml")||"text"}function appendQuery(a,b){return(a+"&"+b).replace(/[&?]{1,2}/,"?")}function serializeData(a){a.processData&&a.data&&$.type(a.data)!="string"&&(a.data=$.param(a.data,a.traditional)),a.data&&(!a.type||a.type.toUpperCase()=="GET")&&(a.url=appendQuery(a.url,a.data))}function parseArguments(a,b,c,d){var e=!$.isFunction(b);return{url:a,data:e?b:undefined,success:e?$.isFunction(c)?c:undefined:b,dataType:e?d||c:c}}function serialize(a,b,c,d){var e,f=$.isArray(b);$.each(b,function(b,g){e=$.type(g),d&&(b=c?d:d+"["+(f?"":b)+"]"),!d&&f?a.add(g.name,g.value):e=="array"||!c&&e=="object"?serialize(a,g,c,b):a.add(b,g)})}var jsonpID=0,document=window.document,key,name,rscript=/)<[^<]*)*<\/script>/gi,scriptTypeRE=/^(?:text|application)\/javascript/i,xmlTypeRE=/^(?:text|application)\/xml/i,jsonType="application/json",htmlType="text/html",blankRE=/^\s*$/;$.active=0,$.ajaxJSONP=function(a){if("type"in a){var b="jsonp"+ ++jsonpID,c=document.createElement("script"),d=function(){clearTimeout(g),$(c).remove(),delete window[b]},e=function(c){d();if(!c||c=="timeout")window[b]=empty;ajaxError(null,c||"abort",f,a)},f={abort:e},g;return ajaxBeforeSend(f,a)===!1?(e("abort"),!1):(window[b]=function(b){d(),ajaxSuccess(b,f,a)},c.onerror=function(){e("error")},c.src=a.url.replace(/=\?/,"="+b),$("head").append(c),a.timeout>0&&(g=setTimeout(function(){e("timeout")},a.timeout)),f)}return $.ajax(a)},$.ajaxSettings={type:"GET",beforeSend:empty,success:empty,error:empty,complete:empty,context:null,global:!0,xhr:function(){return new window.XMLHttpRequest},accepts:{script:"text/javascript, application/javascript",json:jsonType,xml:"application/xml, text/xml",html:htmlType,text:"text/plain"},crossDomain:!1,timeout:0,processData:!0,cache:!0},$.ajax=function(options){var settings=$.extend({},options||{});for(key in $.ajaxSettings)settings[key]===undefined&&(settings[key]=$.ajaxSettings[key]);ajaxStart(settings),settings.crossDomain||(settings.crossDomain=/^([\w-]+:)?\/\/([^\/]+)/.test(settings.url)&&RegExp.$2!=window.location.host),settings.url||(settings.url=window.location.toString()),serializeData(settings),settings.cache===!1&&(settings.url=appendQuery(settings.url,"_="+Date.now()));var dataType=settings.dataType,hasPlaceholder=/=\?/.test(settings.url);if(dataType=="jsonp"||hasPlaceholder)return hasPlaceholder||(settings.url=appendQuery(settings.url,"callback=?")),$.ajaxJSONP(settings);var mime=settings.accepts[dataType],baseHeaders={},protocol=/^([\w-]+:)\/\//.test(settings.url)?RegExp.$1:window.location.protocol,xhr=settings.xhr(),abortTimeout;settings.crossDomain||(baseHeaders["X-Requested-With"]="XMLHttpRequest"),mime&&(baseHeaders.Accept=mime,mime.indexOf(",")>-1&&(mime=mime.split(",",2)[0]),xhr.overrideMimeType&&xhr.overrideMimeType(mime));if(settings.contentType||settings.contentType!==!1&&settings.data&&settings.type.toUpperCase()!="GET")baseHeaders["Content-Type"]=settings.contentType||"application/x-www-form-urlencoded";settings.headers=$.extend(baseHeaders,settings.headers||{}),xhr.onreadystatechange=function(){if(xhr.readyState==4){xhr.onreadystatechange=empty,clearTimeout(abortTimeout);var result,error=!1;if(xhr.status>=200&&xhr.status<300||xhr.status==304||xhr.status==0&&protocol=="file:"){dataType=dataType||mimeToDataType(xhr.getResponseHeader("content-type")),result=xhr.responseText;try{dataType=="script"?(1,eval)(result):dataType=="xml"?result=xhr.responseXML:dataType=="json"&&(result=blankRE.test(result)?null:$.parseJSON(result))}catch(e){error=e}error?ajaxError(error,"parsererror",xhr,settings):ajaxSuccess(result,xhr,settings)}else ajaxError(null,xhr.status?"error":"abort",xhr,settings)}};var async="async"in settings?settings.async:!0;xhr.open(settings.type,settings.url,async);for(name in settings.headers)xhr.setRequestHeader(name,settings.headers[name]);return ajaxBeforeSend(xhr,settings)===!1?(xhr.abort(),!1):(settings.timeout>0&&(abortTimeout=setTimeout(function(){xhr.onreadystatechange=empty,xhr.abort(),ajaxError(null,"timeout",xhr,settings)},settings.timeout)),xhr.send(settings.data?settings.data:null),xhr)},$.get=function(a,b,c,d){return $.ajax(parseArguments.apply(null,arguments))},$.post=function(a,b,c,d){var e=parseArguments.apply(null,arguments);return e.type="POST",$.ajax(e)},$.getJSON=function(a,b,c){var d=parseArguments.apply(null,arguments);return d.dataType="json",$.ajax(d)},$.fn.load=function(a,b,c){if(!this.length)return this;var d=this,e=a.split(/\s/),f,g=parseArguments(a,b,c),h=g.success;return e.length>1&&(g.url=e[0],f=e[1]),g.success=function(a){d.html(f?$("
").html(a.replace(rscript,"")).find(f):a),h&&h.apply(d,arguments)},$.ajax(g),this};var escape=encodeURIComponent;$.param=function(a,b){var c=[];return c.add=function(a,b){this.push(escape(a)+"="+escape(b))},serialize(c,a,b),c.join("&").replace(/%20/g,"+")}}(Zepto),function(a){a.fn.serializeArray=function(){var b=[],c;return a(Array.prototype.slice.call(this.get(0).elements)).each(function(){c=a(this);var d=c.attr("type");this.nodeName.toLowerCase()!="fieldset"&&!this.disabled&&d!="submit"&&d!="reset"&&d!="button"&&(d!="radio"&&d!="checkbox"||this.checked)&&b.push({name:c.attr("name"),value:c.val()})}),b},a.fn.serialize=function(){var a=[];return this.serializeArray().forEach(function(b){a.push(encodeURIComponent(b.name)+"="+encodeURIComponent(b.value))}),a.join("&")},a.fn.submit=function(b){if(b)this.bind("submit",b);else if(this.length){var c=a.Event("submit");this.eq(0).trigger(c),c.defaultPrevented||this.get(0).submit()}return this}}(Zepto),function(a,b){function s(a){return t(a.replace(/([a-z])([A-Z])/,"$1-$2"))}function t(a){return a.toLowerCase()}function u(a){return d?d+a:t(a)}var c="",d,e,f,g={Webkit:"webkit",Moz:"",O:"o",ms:"MS"},h=window.document,i=h.createElement("div"),j=/^((translate|rotate|scale)(X|Y|Z|3d)?|matrix(3d)?|perspective|skew(X|Y)?)$/i,k,l,m,n,o,p,q,r={};a.each(g,function(a,e){if(i.style[a+"TransitionProperty"]!==b)return c="-"+t(a)+"-",d=e,!1}),k=c+"transform",r[l=c+"transition-property"]=r[m=c+"transition-duration"]=r[n=c+"transition-timing-function"]=r[o=c+"animation-name"]=r[p=c+"animation-duration"]=r[q=c+"animation-timing-function"]="",a.fx={off:d===b&&i.style.transitionProperty===b,speeds:{_default:400,fast:200,slow:600},cssPrefix:c,transitionEnd:u("TransitionEnd"),animationEnd:u("AnimationEnd")},a.fn.animate=function(b,c,d,e){return a.isPlainObject(c)&&(d=c.easing,e=c.complete,c=c.duration),c&&(c=(typeof c=="number"?c:a.fx.speeds[c]||a.fx.speeds._default)/1e3),this.anim(b,c,d,e)},a.fn.anim=function(c,d,e,f){var g,h={},i,t="",u=this,v,w=a.fx.transitionEnd;d===b&&(d=.4),a.fx.off&&(d=0);if(typeof c=="string")h[o]=c,h[p]=d+"s",h[q]=e||"linear",w=a.fx.animationEnd;else{i=[];for(g in c)j.test(g)?t+=g+"("+c[g]+") ":(h[g]=c[g],i.push(s(g)));t&&(h[k]=t,i.push(k)),d>0&&typeof c=="object"&&(h[l]=i.join(", "),h[m]=d+"s",h[n]=e||"linear")}return v=function(b){if(typeof b!="undefined"){if(b.target!==b.currentTarget)return;a(b.target).unbind(w,v)}a(this).css(r),f&&f.call(this)},d>0&&this.bind(w,v),this.size()&&this.get(0).clientLeft,this.css(h),d<=0&&setTimeout(function(){u.each(function(){v.call(this)})},0),this},i=null}(Zepto) diff --git a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino b/libraries/Bridge/examples/TimeCheck/TimeCheck.ino deleted file mode 100644 index 848ff25..0000000 --- a/libraries/Bridge/examples/TimeCheck/TimeCheck.ino +++ /dev/null @@ -1,82 +0,0 @@ - -/* - Time Check - - Gets the time from the linino processor via Bridge - then parses out hours, minutes and seconds for the Arduino - using an Arduino Yún. - - created 27 May 2013 - modified 21 June 2013 - By Tom Igoe - - This example code is in the public domain. - - */ - - -#include - -Process date; // process used to get the date -int hours, minutes, seconds; // for the results -int lastSecond = -1; // need an impossible value for comparison - -void setup() { - Bridge.begin(); // initialize Bridge - Serial.begin(9600); // initialize serial - - while(!Serial); // wait for Serial Monitor to open - Serial.println("Time Check"); // Title of sketch - - // run an initial date process. Should return: - // hh:mm:ss : - if (!date.running()) { - date.begin("date"); - date.addParameter("+%T"); - date.run(); - } -} - -void loop() { - - if(lastSecond != seconds) { // if a second has passed - // print the time: - if (hours <= 9) Serial.print("0"); // adjust for 0-9 - Serial.print(hours); - Serial.print(":"); - if (minutes <= 9) Serial.print("0"); // adjust for 0-9 - Serial.print(minutes); - Serial.print(":"); - if (seconds <= 9) Serial.print("0"); // adjust for 0-9 - Serial.println(seconds); - - // restart the date process: - if (!date.running()) { - date.begin("date"); - date.addParameter("+%T"); - date.run(); - } - } - - //if there's a result from the date process, parse it: - while (date.available()>0) { - // get the result of the date process (should be hh:mm:ss): - String timeString = date.readString(); - - // find the colons: - int firstColon = timeString.indexOf(":"); - int secondColon= timeString.lastIndexOf(":"); - - // get the substrings for hour, minute second: - String hourString = timeString.substring(0, firstColon); - String minString = timeString.substring(firstColon+1, secondColon); - String secString = timeString.substring(secondColon+1); - - // convert to ints,saving the previous second: - hours = hourString.toInt(); - minutes = minString.toInt(); - lastSecond = seconds; // save to do a time comparison - seconds = secString.toInt(); - } - -} diff --git a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino b/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino deleted file mode 100644 index 5921b70..0000000 --- a/libraries/Bridge/examples/WiFiStatus/WiFiStatus.ino +++ /dev/null @@ -1,50 +0,0 @@ - -/* - WiFi Status - - This sketch runs a script called "pretty-wifi-info.lua" - installed on your Yún in folder /usr/bin. - It prints information about the status of your wifi connection. - - It uses Serial to print, so you need to connect your Yún to your - computer using a USB cable and select the appropriate port from - the Port menu - - created 18 June 2013 - By Federico Fissore - - This example code is in the public domain. - */ - -#include - -void setup() { - Serial.begin(9600); // initialize serial communication - while(!Serial); // do nothing until the serial monitor is opened - - Serial.println("Starting bridge...\n"); - pinMode(13,OUTPUT); - digitalWrite(13, LOW); - Bridge.begin(); // make contact with the linux processor - digitalWrite(13, HIGH); // Led on pin 13 turns on when the bridge is ready - - delay(2000); // wait 2 seconds -} - -void loop() { - Process wifiCheck; // initialize a new process - - wifiCheck.runShellCommand("/usr/bin/pretty-wifi-info.lua"); // command you want to run - - // while there's any characters coming back from the - // process, print them to the serial monitor: - while (wifiCheck.available() > 0) { - char c = wifiCheck.read(); - Serial.print(c); - } - - Serial.println(); - - delay(5000); -} - diff --git a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino b/libraries/Bridge/examples/XivelyClient/XivelyClient.ino deleted file mode 100644 index 69f979c..0000000 --- a/libraries/Bridge/examples/XivelyClient/XivelyClient.ino +++ /dev/null @@ -1,110 +0,0 @@ -/* - Xively sensor client with Strings - - This sketch connects an analog sensor to Xively, - using an Arduino Yún. - - created 15 March 2010 - updated 27 May 2013 - by Tom Igoe - - */ - -// include all Libraries needed: -#include -#include "passwords.h" // contains my passwords, see below - -/* - NOTE: passwords.h is not included with this repo because it contains my passwords. - You need to create it for your own version of this application. To do so, make - a new tab in Arduino, call it passwords.h, and include the following variables and constants: - - #define APIKEY "foo" // replace your pachube api key here - #define FEEDID 0000 // replace your feed ID - #define USERAGENT "my-project" // user agent is the project name - */ - - -// set up net client info: -const unsigned long postingInterval = 60000; //delay between updates to xively.com -unsigned long lastRequest = 0; // when you last made a request -String dataString = ""; - -void setup() { - // start serial port: - Bridge.begin(); - Serial.begin(9600); - - while(!Serial); // wait for Network Serial to open - Serial.println("Xively client"); - - // Do a first update immediately - updateData(); - sendData(); - lastRequest = millis(); -} - -void loop() { - // get a timestamp so you can calculate reading and sending intervals: - long now = millis(); - - // if the sending interval has passed since your - // last connection, then connect again and send data: - if (now - lastRequest >= postingInterval) { - updateData(); - sendData(); - lastRequest = now; - } -} - -void updateData() { - // convert the readings to a String to send it: - dataString = "Temperature,"; - dataString += random(10) + 20; - // add pressure: - dataString += "\nPressure,"; - dataString += random(5) + 100; -} - -// this method makes a HTTP connection to the server: -void sendData() { - // form the string for the API header parameter: - String apiString = "X-ApiKey: "; - apiString += APIKEY; - - // form the string for the URL parameter: - String url = "https://api.xively.com/v2/feeds/"; - url += FEEDID; - url += ".csv"; - - // Send the HTTP PUT request - - // Is better to declare the Process here, so when the - // sendData function finishes the resources are immediately - // released. Declaring it global works too, BTW. - Process xively; - Serial.print("\n\nSending data... "); - xively.begin("curl"); - xively.addParameter("-k"); - xively.addParameter("--request"); - xively.addParameter("PUT"); - xively.addParameter("--data"); - xively.addParameter(dataString); - xively.addParameter("--header"); - xively.addParameter(apiString); - xively.addParameter(url); - xively.run(); - Serial.println("done!"); - - // If there's incoming data from the net connection, - // send it out the Serial: - while (xively.available()>0) { - char c = xively.read(); - Serial.write(c); - } - -} - - - - diff --git a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino b/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino deleted file mode 100644 index faffd93..0000000 --- a/libraries/Bridge/examples/YunSerialTerminal/YunSerialTerminal.ino +++ /dev/null @@ -1,78 +0,0 @@ -/* - Arduino Yun USB-to-Serial - - Allows you to use the Yun's 32U4 processor as a - serial terminal for the linino processor. - - Upload this to an Arduino Yun via serial (not WiFi) - then open the serial monitor at 115200 to see the boot process - of the linino processor. You can also use the serial monitor - as a basic command line interface for the linino processor using - this sketch. - - From the serial monitor the following commands can be issued: - - '~' followed by '0' -> Set the UART speed to 57600 baud - '~' followed by '1' -> Set the UART speed to 115200 baud - '~' followed by '2' -> Set the UART speed to 250000 baud - '~' followed by '3' -> Set the UART speed to 500000 baud - '~' followeb by '~' -> Sends the bridge's shutdown command to - obtain the console. - - The circuit: - * Arduino Yun - - created March 2013 - by Massimo Banzi - modified by Cristian Maglie - - This example code is in the public domain. - */ - -long lininoBaud = 250000; - -void setup() { - Serial.begin(115200); // open serial connection via USB-Serial - Serial1.begin(lininoBaud); // open serial connection to Linino -} - -boolean commandMode = false; - -void loop() { - // copy from virtual serial line to uart and vice versa - if (Serial.available()) { // got anything from USB-Serial? - char c = (char)Serial.read(); // read from USB-serial - if (commandMode == false) { // if we aren't in command mode... - if (c == '~') { // Tilde '~' key pressed? - commandMode = true; // enter in command mode - } else { - Serial1.write(c); // otherwise write char to Linino - } - } else { // if we are in command mode... - if (c == '0') { // '0' key pressed? - Serial1.begin(57600); // set speed to 57600 - Serial.println("Speed set to 57600"); - } else if (c == '1') { // '1' key pressed? - Serial1.begin(115200); // set speed to 115200 - Serial.println("Speed set to 115200"); - } else if (c == '2') { // '2' key pressed? - Serial1.begin(250000); // set speed to 250000 - Serial.println("Speed set to 250000"); - } else if (c == '3') { // '3' key pressed? - Serial1.begin(500000); // set speed to 500000 - Serial.println("Speed set to 500000"); - } else if (c == '~') { - Serial1.write((uint8_t *)"\xff\0\0\x05XXXXX\x0d\xaf", 11); - Serial.println("Sending bridge's shutdown command"); - } else { // any other key pressed? - Serial1.write('~'); // write '~' to Linino - Serial1.write(c); // write char to Linino - } - commandMode = false; // in all cases exit from command mode - } - } - if (Serial1.available()) { // got anything from Linino? - char c = (char)Serial1.read(); // read from Linino - Serial.write(c); // write to USB-serial - } -} \ No newline at end of file diff --git a/libraries/Bridge/keywords.txt b/libraries/Bridge/keywords.txt deleted file mode 100644 index 05453b8..0000000 --- a/libraries/Bridge/keywords.txt +++ /dev/null @@ -1,85 +0,0 @@ -####################################### -# Syntax Coloring Map For Bridge -####################################### - -####################################### -# Class (KEYWORD3) -####################################### - -Bridge KEYWORD3 -FileIO KEYWORD3 -FileSystem KEYWORD3 -Console KEYWORD3 -Process KEYWORD3 -Mailbox KEYWORD3 -HttpClient KEYWORD3 - -####################################### -# Methods and Functions (KEYWORD2) -####################################### - -# methods names in commond -begin KEYWORD2 -end KEYWORD2 -available KEYWORD2 -read KEYWORD2 -peek KEYWORD2 -write KEYWORD2 -flush KEYWORD2 -bool KEYWORD2 - -# Bridge Class -transfer KEYWORD2 -put KEYWORD2 -get KEYWORD2 - -# Console Class -buffer KEYWORD2 -noBuffer KEYWORD2 -connected KEYWORD2 - -# FileIO Class -File KEYWORD2 -seek KEYWORD2 -position KEYWORD2 -size KEYWORD2 -close KEYWORD2 -name KEYWORD2 -isDirectory KEYWORD2 -openNextFile KEYWORD2 -rewindDirectory KEYWORD2 - -# Process Class -addParameter KEYWORD2 -runAsynchronously KEYWORD2 -run KEYWORD2 -running KEYWORD2 -exitValue KEYWORD2 -runShellCommand KEYWORD2 -runShellCommandAsynchronously KEYWORD2 - -# Mailbox Class -readMessage KEYWORD2 -writeMessage KEYWORD2 -writeJSON KEYWORD2 -message Available KEYWORD2 - -# HttpClient Class -getAsynchronously KEYWORD2 -ready KEYWORD2 -getResult KEYWORD2 - -# YunServer Class -accept KEYWORD2 -stop KEYWORD2 -connect KEYWORD2 -connected KEYWORD2 - - -####################################### -# Constants (LITERAL1) -####################################### - -FILE_READ LITERAL1 -FILE_WRITE LITERAL1 -FILE_APPEND LITERAL1