3f8c442204
Update SoftwareSerialExample.ino
...
Also includes Micros per https://www.arduino.cc/en/Reference/SoftwareSerial
2016-08-14 19:14:53 -04:00
b9801daeb7
Wrap SoftwareSerial _SS_MAX_RX_BUFF define
...
To allow sketches to override value as per #58 .
2016-07-18 15:54:46 -04:00
753c717566
Fix buffer being overwritten by multiple twi_transmit calls
...
Fixes that more complex methods (like Stream::print(float)) do not work properly.
Without this fix, Wire.print(1.01f); results in '1' because Print::printFloat(double, uint8_t) performs multiple print() and therefore twi_transmit calls. Also Wire.println("Heyho"); results only in a newline character.
2016-06-05 03:01:57 +02:00
f84feb46e6
Update SoftwareSerial.cpp
2016-04-05 15:10:46 -04:00
24bf82db61
Merge pull request #4716 from asukiaaa/master
...
Corrected comments of rx and tx in a SoftwareSerial example.
2016-04-04 10:00:47 -04:00
c80a30e8b6
Corrected comments of rx and tx for SoftwareSerial example.
2016-03-19 16:21:07 +09:00
242e405f60
Make SoftwareSerial receive buffer a uint8_t array
2016-03-10 10:23:50 -05:00
3cebac8ddf
Add missing cast to SoftwareSerial::peek() when returning buffered value
2016-03-10 10:23:50 -05:00
36ab53b80d
Fix Wire register
...
Move TWBR register from Wire.cpp to twi.c file.
2016-03-09 15:47:55 -05:00
a11ba6108a
Move AVR Wire library utility folder under source
2016-03-04 17:11:56 -05:00
bf730be92d
Merge pull request #4646 from arduino/SimonePDA-patch-3
...
Update library.properties
2016-03-03 15:19:26 -05:00
ccf08472c7
Merge pull request #4645 from arduino/SimonePDA-patch-2
...
Update library.properties
2016-03-03 15:19:06 -05:00
a3ea35834f
Update library.properties
2016-03-03 19:57:04 +01:00
9339d7254c
Update library.properties
2016-03-03 19:34:02 +01:00
d7f6536f3a
Update library.properties
2016-03-03 19:26:22 +01:00
ae829f6ac5
Update library.properties
2016-03-03 19:13:25 +01:00
4ea9207559
add src folder when missing
2016-03-02 14:45:57 +01:00
d5a10e8ca8
moved .h file in src folder
2016-03-02 10:49:39 +01:00
2b1d8d6112
update sentences
2016-03-01 16:09:50 +01:00
bc6d0e7908
Fixed typo
2016-02-01 12:52:29 -07:00
61d915c5a6
Update Wire.cpp
...
Removed implicit conversions from unsigned, to signed, back to unsigned.
2016-01-18 13:12:11 -07:00
8eea4fc81d
Added HID_REPORT_TYPE definitions
2015-12-10 10:30:04 +01:00
cecba6cde7
Merge branch 'remove-wire-keywords' of https://github.com/per1234/Arduino
2015-11-30 10:20:10 +01:00
7ace92deb3
Remove unused keywords from Wire libraries keywords.txt
...
These functions have been replaced by read() and write() since Arduino
1.0.
2015-11-28 17:56:21 -08:00
27ccdfb19b
eeprom_clear example: Set pinMode of LED pin
2015-11-24 16:23:16 -08:00
5bc0a1c056
SoftwareSerial: fix flush() behaviour
...
Fix #4029
2015-11-11 16:28:48 +01:00
c581cec8bf
Remove tx_pin_write from SoftwareSerial.h
...
It’s not implemented anywhere and unused.
2015-11-05 15:39:11 -05:00
b31b6b8efd
Remove unused param warning
2015-11-05 14:28:40 -05:00
271a3b7b2a
Add inline to recv and setRxIntMsk to remove warning ( #4078 )
2015-11-05 14:28:29 -05:00
67be29640d
[PUSB] Fixed return value for HID_::SendReport
2015-10-30 13:00:33 +01:00
25d1a2a67c
[PHID] send data if report ID was sent successful
...
If the first sending was not successful it is better to abort. Then we get a return value of -1 (instead of -2 if the 2nd call will also fail) and we do not need to block even longer, with another timeout.
2015-10-30 12:58:14 +01:00
fff2677c82
Added return value to HID SendReport
2015-10-30 12:58:14 +01:00
aa0687e8c3
check TWWC (Write Collision Flag) bit after setting TWDR
...
as suggested by @earlyprogrammer in #2173 , to ensure TWDR value is set
if there is a write collision
2015-10-22 16:33:00 +02:00
6562a2e3a6
release TWI bus right after stop or repeated start is condition
...
this resolves timing issues seen in #1477
2015-10-22 16:29:43 +02:00
a3cfc4dccf
Merge remote-tracking branch 'arduino/master' into HEAD
2015-10-21 15:53:59 +02:00
b9bb55584c
[USB] use plugged modules name to create iSerial field
2015-10-21 15:23:56 +02:00
281546bccb
[PHID] Fixes protocol on reenumeration
2015-10-12 18:05:34 +02:00
b8eeeff166
[HID] renamed HIDDescriptorListNode to HIDSubDescriptor
2015-10-12 12:24:07 +02:00
80e228483d
[PUSB] Renamed PUSBListNode to PluggableUSBModule
2015-10-12 12:14:07 +02:00
84b3d7ac2b
[HID] made HIDDescriptorListNode.length constant
2015-10-12 11:59:08 +02:00
7cef3b3410
[PHID] Added missing GET_IDLE Request
2015-10-11 14:39:36 +02:00
31f93d2c4e
[PHID] Added some hints for further optional implementations
2015-10-10 13:11:31 +02:00
2c38941e90
Added official HID definitions
...
Since the HID library adds some general HID definitions and structs, it is very useful to also include this in a custom library.
If you dupe the information you have problems of redeclaration.
Having those defintions inside the official HID library is essential for a good working additional HID API.
2015-10-10 12:49:45 +02:00
a5b1f68aae
Remove unnecessary include
...
Its included by HID.h anyways.
2015-10-08 17:24:09 +02:00
8b6b796f94
[HID] Improved checks in getDescriptor() method
2015-10-08 16:38:57 +02:00
ec2cf46acf
[PUSB] Removed unnecessary endpoint and interface function
2015-10-07 20:39:50 +02:00
1f5fc56429
[PHID] Added SetReport function
...
This commit just shows other that this option is available and not implemented.
You may use this to determine the Led Lights state of a keyboard or transmit data via RAWHID from the PC.
Quick usage guide:
int length = ((setup.wValueH << 8) | setup.wLength);
USB_RecvControl((uint8_t* data, USB_EP_SIZE); // Needs to be splitted into USB_EP_SIZE packets, not shown here. See HID Project.
2015-10-07 20:37:05 +02:00
fdb1fd384b
[PUSB] Made getDescriptor() and setup() more flexible
...
Alternatively we can only pass the wIndex to getDescriptor but I suggest to just pass the pointer aka reference of the whole setup.
In guess (havent tested this) that this results in more or less the code size but its a) idential with the other functions and b) we late have more flexibility here.
The Code got a quick SerialKeyboard.ino test
2015-10-07 19:02:40 +02:00
f0f10cb290
[PUSB] renamed some parameters
2015-10-07 13:21:21 +02:00
a6c4a6395e
[PUSB] Fix static initialization order fiasco
...
For details see:
https://isocpp.org/wiki/faq/ctors#static-init-order-on-first-use
2015-10-02 11:59:24 +02:00
Paul Vivier
Sandeep Mistry
kellerkindt
Bradley Luke Totaro
asukiaaa
Paolo Paolucci
SimonePDA
Alice Pintus
Brent Wilkins
Brent Wilkins
NicoHood
Cristian Maglie
per1234
Martino Facchin