6848ea443c
Fix compiler warnings about ignored 'const' in EEPROM.h
2018-09-03 17:27:58 +02:00
380241dd17
Update DigitalPotControl.ino
...
Fixing SPI communication with a delay as pointe out in #6395
2018-04-12 10:21:36 +02:00
f1c4cc6316
UnConfigured I2C Slave ISR Causing Reboot
...
In a MultiMaster I2C environment, The Default value of 0xFE in the TWAR cause the Arduino to respond as an I2C Slave device at address 0x7f. If the Wire.h library was not configured as a I2C Slave, `Wire.begin(slaveID);` the Callbacks for `twi_onSlaveTransmit()` and `twi_onSlaveReceive()` are never initialized.
But, they are called during servicing the TWI ISR. This causes a reboot of the Arduino by jumping to an uninitialized function address (0).
So, this fix initializes them to the Default Wire.h handler which will respond correctly even during Master Mode operations.
A MASTER MODE only Arduino will respond to all Slave Calls that match TWAR, Unless the TWEA bit is disabled outside of Master Transactions.
Chuck.
It also initialized the TWAR to the General Call ID (0x0) and Disables General Call responses.
Chuck.
2017-11-13 17:45:33 +01:00
6c861d8c70
[WIRE] Remove extra line from digital_potentiometer example
2017-11-13 12:42:12 +01:00
04713212a8
Update SoftwareSerialExample.ino
...
Also includes Micros per https://www.arduino.cc/en/Reference/SoftwareSerial
2016-08-14 19:14:53 -04:00
0f86786b47
Wrap SoftwareSerial _SS_MAX_RX_BUFF define
...
To allow sketches to override value as per #58 .
2016-07-18 15:54:46 -04:00
43d5e073b4
Fix buffer being overwritten by multiple twi_transmit calls
...
Fixes that more complex methods (like Stream::print(float)) do not work properly.
Without this fix, Wire.print(1.01f); results in '1' because Print::printFloat(double, uint8_t) performs multiple print() and therefore twi_transmit calls. Also Wire.println("Heyho"); results only in a newline character.
2016-06-05 03:01:57 +02:00
71b87bf26b
Update SoftwareSerial.cpp
2016-04-05 15:10:46 -04:00
2fa23a2486
Merge pull request #4716 from asukiaaa/master
...
Corrected comments of rx and tx in a SoftwareSerial example.
2016-04-04 10:00:47 -04:00
15f17aa06c
Corrected comments of rx and tx for SoftwareSerial example.
2016-03-19 16:21:07 +09:00
422b6f9bb7
Make SoftwareSerial receive buffer a uint8_t array
2016-03-10 10:23:50 -05:00
8beaa0e1b1
Add missing cast to SoftwareSerial::peek() when returning buffered value
2016-03-10 10:23:50 -05:00
7b2f6fc028
Fix Wire register
...
Move TWBR register from Wire.cpp to twi.c file.
2016-03-09 15:47:55 -05:00
aa710ab682
Move AVR Wire library utility folder under source
2016-03-04 17:11:56 -05:00
0faaf15a5f
Merge pull request #4646 from arduino/SimonePDA-patch-3
...
Update library.properties
2016-03-03 15:19:26 -05:00
3435794d19
Merge pull request #4645 from arduino/SimonePDA-patch-2
...
Update library.properties
2016-03-03 15:19:06 -05:00
c3089f872e
Update library.properties
2016-03-03 19:57:04 +01:00
19ef218db4
Update library.properties
2016-03-03 19:34:02 +01:00
9b5bec1260
Update library.properties
2016-03-03 19:26:22 +01:00
bdc58c5baa
Update library.properties
2016-03-03 19:13:25 +01:00
3ba80468d5
add src folder when missing
2016-03-02 14:45:57 +01:00
e8f1805137
moved .h file in src folder
2016-03-02 10:49:39 +01:00
f81317889e
update sentences
2016-03-01 16:09:50 +01:00
b3caf62124
Fixed typo
2016-02-01 12:52:29 -07:00
258172f6ab
Update Wire.cpp
...
Removed implicit conversions from unsigned, to signed, back to unsigned.
2016-01-18 13:12:11 -07:00
513dbdd690
Added HID_REPORT_TYPE definitions
2015-12-10 10:30:04 +01:00
cb4341aa2c
Merge branch 'remove-wire-keywords' of https://github.com/per1234/Arduino
2015-11-30 10:20:10 +01:00
9e9bc7549c
Remove unused keywords from Wire libraries keywords.txt
...
These functions have been replaced by read() and write() since Arduino
1.0.
2015-11-28 17:56:21 -08:00
f873b487c6
eeprom_clear example: Set pinMode of LED pin
2015-11-24 16:23:16 -08:00
7bd71f04b0
SoftwareSerial: fix flush() behaviour
...
Fix #4029
2015-11-11 16:28:48 +01:00
ab82f330b5
Remove tx_pin_write from SoftwareSerial.h
...
It’s not implemented anywhere and unused.
2015-11-05 15:39:11 -05:00
b95b4c83db
Remove unused param warning
2015-11-05 14:28:40 -05:00
6e2f0746bd
Add inline to recv and setRxIntMsk to remove warning ( #4078 )
2015-11-05 14:28:29 -05:00
0b69598cfb
[PUSB] Fixed return value for HID_::SendReport
2015-10-30 13:00:33 +01:00
7d012c11b8
[PHID] send data if report ID was sent successful
...
If the first sending was not successful it is better to abort. Then we get a return value of -1 (instead of -2 if the 2nd call will also fail) and we do not need to block even longer, with another timeout.
2015-10-30 12:58:14 +01:00
1f318b08d4
Added return value to HID SendReport
2015-10-30 12:58:14 +01:00
02dcc6ec74
check TWWC (Write Collision Flag) bit after setting TWDR
...
as suggested by @earlyprogrammer in #2173 , to ensure TWDR value is set
if there is a write collision
2015-10-22 16:33:00 +02:00
48bcef5a15
release TWI bus right after stop or repeated start is condition
...
this resolves timing issues seen in #1477
2015-10-22 16:29:43 +02:00
eefb9a8bcb
Merge remote-tracking branch 'arduino/master' into HEAD
2015-10-21 15:53:59 +02:00
ced062988b
[USB] use plugged modules name to create iSerial field
2015-10-21 15:23:56 +02:00
ca3c821c04
[PHID] Fixes protocol on reenumeration
2015-10-12 18:05:34 +02:00
f42b26c257
[HID] renamed HIDDescriptorListNode to HIDSubDescriptor
2015-10-12 12:24:07 +02:00
2e755384f5
[PUSB] Renamed PUSBListNode to PluggableUSBModule
2015-10-12 12:14:07 +02:00
f720c8cacf
[HID] made HIDDescriptorListNode.length constant
2015-10-12 11:59:08 +02:00
ad0b3d9332
[PHID] Added missing GET_IDLE Request
2015-10-11 14:39:36 +02:00
8237e5422d
[PHID] Added some hints for further optional implementations
2015-10-10 13:11:31 +02:00
e3977037ae
Added official HID definitions
...
Since the HID library adds some general HID definitions and structs, it is very useful to also include this in a custom library.
If you dupe the information you have problems of redeclaration.
Having those defintions inside the official HID library is essential for a good working additional HID API.
2015-10-10 12:49:45 +02:00
a343dd88d1
Remove unnecessary include
...
Its included by HID.h anyways.
2015-10-08 17:24:09 +02:00
f2d7b52e1b
[HID] Improved checks in getDescriptor() method
2015-10-08 16:38:57 +02:00
abd6b795c4
[PUSB] Removed unnecessary endpoint and interface function
2015-10-07 20:39:50 +02:00
Brian Park
SimonePDA
chuck todd
Quswar Mahmood Abid
Paul Vivier
Sandeep Mistry
kellerkindt
Bradley Luke Totaro
asukiaaa
Paolo Paolucci
Alice Pintus
Brent Wilkins
Brent Wilkins
NicoHood
Cristian Maglie
per1234
Martino Facchin