70b6f11d63
Fixing Serial.flush() breakage on Leonardo (WestFW).
...
http://code.google.com/p/arduino/issues/detail?id=1020
2012-08-30 07:44:25 -04:00
912092b03f
Fixing ATmega8 breakage from flush() change. (WestFW)
...
http://code.google.com/p/arduino/issues/detail?id=1019
2012-08-29 20:52:30 -04:00
c29b408a9d
Adding overloads so Serial.write(0) works.
...
http://code.google.com/p/arduino/issues/detail?id=1006
2012-08-29 16:32:05 -04:00
00ab72619e
Serial.flush() waits for last character to be transmitted (michele.mazzucchi)
...
http://code.google.com/p/arduino/issues/detail?id=871
2012-08-28 08:02:54 -04:00
c40ab91c41
Fix issue 866
...
Fix issue 866 by adding a const qualifier to what the F macro casts to.
2012-08-16 20:59:33 -07:00
af8ff1d1e0
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
New Serial.begin(baud, config);
2012-08-14 19:55:13 +06:00
1cda182f33
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
New Serial.begin(baud, config);
2012-08-14 19:52:00 +06:00
b6faa6e254
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
New Serial.begin(baud, config);
2012-08-14 19:50:36 +06:00
0c0defa645
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 22:07:42 +06:00
ed699cf636
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 21:35:48 +06:00
1f6dd92313
Update hardware/arduino/cores/arduino/HardwareSerial.cpp
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:57:57 +06:00
03a4b50b8e
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:23:00 +06:00
b9bbc71dca
Update hardware/arduino/cores/arduino/HardwareSerial.h
...
Adding advanced begin (); with the ability to specify the length of bits, parity, stop bits.
2012-08-12 20:18:50 +06:00
4293079076
Fix for tone() on Leonardo.
2012-08-08 18:27:40 +09:00
ef7a66b845
Use "wiring" (not "stk500v2") avrdude protocol for uploads to Mega 2560.
...
It performs the auto-reset in avrdude. Otherwise, some uploads seem to fail (possibly because it takes too long to launch avrdude from the IDE, so there's too much of a delay between the auto-reset done by the IDE and the upload).
http://code.google.com/p/arduino/issues/detail?id=806
2012-07-15 09:12:08 -04:00
e77ee2903b
Print "ovf" if float to be printed doesn't fit in a long.
...
http://code.google.com/p/arduino/issues/detail?id=967
2012-06-28 23:20:56 -04:00
2ef2f9d5c7
Print "inf" for infinite floating point numbers (using isinf()).
...
http://code.google.com/p/arduino/issues/detail?id=961
2012-06-23 10:37:35 -05:00
29ff4f779a
Adding write(str) and write(buf, size) for USB CDC.
...
So that they work on the Leonardo.
http://code.google.com/p/arduino/issues/detail?id=958
2012-06-14 15:54:13 +01:00
3436ca97cb
Printing NaN values as "nan" in printFloat().
...
http://code.google.com/p/arduino/issues/detail?id=946
2012-06-04 23:30:41 -04:00
57973bcd49
Check for NULL pointer in Print.write().
...
Otherwise, trying to print(NULL) or write(NULL) could print a random
character.
http://code.google.com/p/arduino/issues/detail?id=941
2012-06-03 07:48:32 -04:00
4ed0bd2bd5
Added support for interrupt on INT2 and INT3 on the Leonardo
2012-06-02 20:08:46 +02:00
810803c6d3
Merge remote-tracking branch 'upstream/master'
2012-05-21 09:31:54 -07:00
3e68702149
Updating SoftwareSerial pin mapping (pin change interrupts) for Leonardo.
2012-05-20 15:56:49 -07:00
e346d868b9
added pin change interrupt defines for Leonardo. fix for broken software serial on Leonardo
2012-05-19 22:05:46 -04:00
b495294aa3
Adding readString() and readStringUntil() to Stream (Adrian McEwen).
...
This isn't necessarily a particularly efficient implementation (it
allocates memory one character at a time and so may lead to
fragmentation) but it seems to work.
http://code.google.com/p/arduino/issues/detail?id=454
2012-05-16 15:39:34 -04:00
efa7593772
Mouse.isPressed() now checks only for left button by default
...
if no argument is given now checks left button by default to be consistent with press() and release() (thanks, David Mellis)
2012-05-15 15:48:51 -04:00
757a77ab67
renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-05-01 11:18:15 -04:00
d755d0035d
changed PID values for Leonardo bootloader and sketch
...
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-25 15:56:18 -04:00
6ae1a17235
bugfix for configuring PWM on D6 and D13 too early. (thanks to Limor Fried)
...
was starting PWM on these pins too soon - in init() instead of when analogWrite() was called. as a result doing output on port registers directly failed.
2012-04-19 15:52:16 -04:00
56ddc4637d
bugfix for boards with a timer 4 but no channel D
...
compilation failed for Mega because the COM4D1 and OCR4D registers are defined for 32U4 but not for Mega
2012-04-19 15:46:32 -04:00
764f94d0f1
merged Caterina with Blink
2012-04-11 23:24:04 -04:00
49f7fb00fd
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
e2e0260094
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
f9a4a4362d
Micro and Leonardo bootloaders for distribution are now merged with Blink sketch
2012-04-09 08:08:34 -04:00
ec83f55b62
sketch USB VID and PID values are passed in from boards.txt at compile time now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-09 08:06:35 -04:00
afedb5a92b
PID and VID are no longer hard-coded in bootloader. instead they are passed in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-09 08:03:56 -04:00
ee611dc194
Revert "Revert "added a short delay and comment to boolean operator in CDC""
...
This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06 21:23:17 -04:00
02c5849501
Revert "added a short delay and comment to boolean operator in CDC"
...
This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-06 17:36:09 +02:00
dd55096901
added a short delay and comment to boolean operator in CDC
...
Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-03 10:52:38 -04:00
a984b581a8
added Boolean operators to HardwareSerial and CDC to test whether the port is ready to send data.
...
Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-04-01 12:54:35 -04:00
1534b2b730
fixed logic error in Keyboard.release() - now removes every occurrence of a key if it's present more than once
2012-03-28 19:46:32 -04:00
83feb14013
removed horrible multi-key Keyboard.press() and Keyboard.release() methods
...
Saves 924 bytes of Flash
2012-03-28 18:46:10 -04:00
d3eabc9c01
eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() (David Mellis). Also edit KeyboardReprogram example which was the only example using type()
2012-03-28 18:35:26 -04:00
58c36f76d5
added methods to Keyboard to handle multiple simultaneous key presses or releases (up to six each)
2012-03-26 17:28:02 -04:00
f646c9186d
Keyboard.type() now just presses and releases the key indicated - doesn't releaseAll()
2012-03-26 17:00:16 -04:00
9c040a8a2b
added stub methods for begin() and end() to Mouse and Keyboard
2012-03-26 16:02:40 -04:00
dbdf2dadfa
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-03-24 09:30:17 -04:00
9a8976ce56
Putting ArduinoISP back to 19200 baud.
...
From 9600. And lowering the delay in the heartbeat from 40 to 20,
which seems to fix things again.
2012-03-15 19:02:08 -04:00
8c618773b5
reduced delay before starting the Leonardo bootloader
...
Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-14 18:17:22 -04:00
083f7c8891
bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.
...
Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?
2012-03-14 17:48:11 -04:00
David A. Mellis
Adam Dunlap
Alarus
Shigeru KANEMOTO
Kristian Lauszus
Zach Eveland
Federico Vanzati