49f7fb00fd
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
e2e0260094
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
ec83f55b62
sketch USB VID and PID values are passed in from boards.txt at compile time now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-09 08:06:35 -04:00
ee611dc194
Revert "Revert "added a short delay and comment to boolean operator in CDC""
...
This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06 21:23:17 -04:00
02c5849501
Revert "added a short delay and comment to boolean operator in CDC"
...
This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-06 17:36:09 +02:00
dd55096901
added a short delay and comment to boolean operator in CDC
...
Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-03 10:52:38 -04:00
a984b581a8
added Boolean operators to HardwareSerial and CDC to test whether the port is ready to send data.
...
Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-04-01 12:54:35 -04:00
1534b2b730
fixed logic error in Keyboard.release() - now removes every occurrence of a key if it's present more than once
2012-03-28 19:46:32 -04:00
83feb14013
removed horrible multi-key Keyboard.press() and Keyboard.release() methods
...
Saves 924 bytes of Flash
2012-03-28 18:46:10 -04:00
d3eabc9c01
eliminated Keyboard.type() - unnecessary duplication of Keyboard.write() (David Mellis). Also edit KeyboardReprogram example which was the only example using type()
2012-03-28 18:35:26 -04:00
58c36f76d5
added methods to Keyboard to handle multiple simultaneous key presses or releases (up to six each)
2012-03-26 17:28:02 -04:00
f646c9186d
Keyboard.type() now just presses and releases the key indicated - doesn't releaseAll()
2012-03-26 17:00:16 -04:00
9c040a8a2b
added stub methods for begin() and end() to Mouse and Keyboard
2012-03-26 16:02:40 -04:00
8c618773b5
reduced delay before starting the Leonardo bootloader
...
Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-14 18:17:22 -04:00
b407337677
Fix for some strange behaviours during board reset
2012-03-07 16:21:04 +01:00
1566006871
Added Keyboard support for all modifier and all common non-printing keys.
2012-03-03 23:37:39 -05:00
54fb0bf3f5
Removed support for key mapping in Keyboard.
...
Was no longer being used and would be damn near impossible to support with the new scheme for handling modifiers and non-printing keyboard characters.
2012-03-03 23:06:44 -05:00
fbea67532a
added Keyboard methods press(), release(), and releaseAll()
...
Changes mean that a single, persistent key report must be used so keys can be added or removed. Also reimplemented type() using the new methods.
2012-03-03 22:54:45 -05:00
74863e4bdf
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
...
Conflicts:
.gitignore
2012-03-03 13:28:39 -05:00
8f5869009c
fixed minor compilation warnings for Leonardo
2012-03-03 13:26:57 -05:00
4fade7007f
Small changes for the ATmega1284.
...
http://code.google.com/p/arduino/issues/detail?id=736
2012-03-02 18:58:53 -05:00
c8ca7f9636
changed auto-reset logic for Leonardo. only do WDT manipulation if the port is opened at 1200 bps. (Dave Mellis)
2012-03-01 08:51:16 -05:00
73066a4ca2
Autoreset 1200 bps fix.
2012-02-27 17:41:38 +01:00
0138ee9b01
shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. Reset into bootloader is much snappier.
2012-02-22 22:33:44 -05:00
66019a7550
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-22 15:19:32 -05:00
7948125208
Leonardo now checks whether bootloader should be run after a WDT event.
...
Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch.
Test in a sketch by adding to setup():
wdt_enable(WDTO_2S);
Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader).
Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-14 12:17:30 -05:00
924e5a4846
Leonardo auto-reset-and-upload changes for Windows (explanation below)
...
On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated.
Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13 00:56:06 -05:00
ac3aca0acf
changed Leonardo bootloader and sketch PID values again (now 0x0701 for bootloader, 0x0801 for sketch)
2012-02-13 00:10:16 -05:00
a7afdf40ba
prog_char -> char PROGMEM in Print.cpp
...
http://code.google.com/p/arduino/issues/detail?id=795
2012-02-12 19:52:03 -05:00
35bbf80ba9
adjusting descriptors - trying to prevent sketch and bootloader from grabbing different COM numbers on Windows
2012-02-08 01:16:56 -05:00
d7b0507e8a
fixed starting Leonardo bootloader from sketch
...
AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03 21:42:46 -05:00
a794f295e0
Merge branch 'master' of github.com:arduino/Arduino into LUFA_bootloader
2012-02-03 19:54:33 -05:00
e1438efb3a
Making head and tail unsigned to avoid division in serial ISR.
...
http://code.google.com/p/arduino/issues/detail?id=776
2012-02-03 17:24:29 -05:00
45d3b10295
Caterina now cleanly hands off operation to the sketch
...
had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-24 18:04:10 -05:00
989f672d34
Merge branch 'master' of github.com:arduino/Arduino into new-extension
2012-01-10 12:02:27 -05:00
6c00397e22
Adding INPUT_PULLUP option pinMode(). (Paul Stoffregen).
...
This also changes pinMode(pin, INPUT); to explicitly disable the pull-up resistor, even if it was previously set.
http://code.google.com/p/arduino/issues/detail?id=246
2012-01-02 14:20:28 -05:00
3b962be273
Fixing findUntil() problem with repeated initial characters. (Jeffery.zksun)
...
http://code.google.com/p/arduino/issues/detail?id=768
2012-01-02 13:49:59 -05:00
95b51c7728
Fixing warnings (unsigned comparisons to 0). (maniacbug)
2012-01-02 12:57:23 -05:00
3f429a9c61
Fixing static is not at beginning of declaration warnings (maniacbug).
2012-01-02 12:38:23 -05:00
cbce8ed4bf
Merge branch 'master' of github.com:arduino/Arduino into new-extension
2011-12-31 11:21:44 -05:00
3ece2827a4
Simplifying microseconds <-> clock cycles conversions. (Rob Tillaart)
...
This should fix problems with overflows in pulseIn(). It may make millis() slightly less precise for clock speeds that aren't multiple of 1 million, but we don't really support those anyway.
http://code.google.com/p/arduino/issues/detail?id=675
2011-12-30 18:05:12 -05:00
4e9fb924b2
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:09:44 -05:00
e405a6eb60
Revert "changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream."
...
This reverts commit de1d5fc0cb82874c0dcb766c5fb27ab36c5cb32c.
2011-12-20 17:08:07 -05:00
e4930f866d
changed Keyboard write() method to type(). Made write() an alias for type() to allow subclassing by Stream.
2011-12-20 17:00:19 -05:00
6dc00061df
fixed attachInterrupt() on Leonardo
...
had to define a separate block for the 32U4 since it looks like a Mega-series board based on a simple register trick. Only two useable HW interrupts though, compared to the Megas' 8, and numbering differs.
2011-12-19 15:40:12 -05:00
58fc0d17cc
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
177641003c
fixed digitalWrite on timer 4 pins (D6 and D13)
2011-12-18 14:18:38 -05:00
c58fcf5554
fixed TIMER4 use on Leonardo
...
ATMEGA32U4 has major differences in TIMER4 registers compared to ATMEGA1280 and 2560. turnOffPWM, analogWrite, and initialize routines had wrong registers, bit names, etc.
2011-12-11 19:56:50 -05:00
a9d1368e4c
Updated reference voltage defines for ATmega1284P.
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:18:15 -05:00
c2263dfc0b
Support 3rd external interrupt on ATmega1284P (maniacbug)
...
http://code.google.com/p/arduino/issues/detail?id=728
2011-12-02 17:17:27 -05:00
Zach Eveland
Federico Vanzati
Cristian Maglie
David A. Mellis