e5903d0b1e
updated Yun bootloader
2013-06-21 17:40:59 +02:00
606f920f55
new yun bootloader
2013-05-23 11:07:18 +02:00
5ab307f06f
Etheris references renamed Yun without accent to avoid encoding issues
2013-05-23 09:53:56 +02:00
180713e5e7
Etheris bootloader
...
updated python bridge path
2013-05-14 16:51:42 +02:00
e624b841b3
Fixed some firmware filenames
2012-12-10 10:35:19 +01:00
9ea979faf4
Added Esplora precompiled firmware
2012-12-07 21:24:24 +01:00
1668039101
Added support for Arduino Esplora
2012-12-07 18:11:07 +01:00
bb37d2679e
Saved old Leonardo and Micro production firmware.
...
Rebuilt firmware for Micro.
Added pre-loaded Blink to new firmwares.
2012-11-30 16:34:04 +01:00
0c0dc27de7
Improved Leonardo bootloader
...
The power-on reset detection didn't work properly, but has now been
fixed
2012-11-30 15:32:11 +01:00
8fb58612a0
Caterina changes to support Micro. includes newly rebuilt version of the bootloader merged with Blink produced using 1.0.2
2012-11-23 16:09:32 -05:00
bb6569d069
Updating Micro bootloader firmware.
2012-11-02 17:45:57 -04:00
42ca56fb83
Adding Micro.
2012-10-27 14:12:26 -04:00
d755d0035d
changed PID values for Leonardo bootloader and sketch
...
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-25 15:56:18 -04:00
764f94d0f1
merged Caterina with Blink
2012-04-11 23:24:04 -04:00
49f7fb00fd
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
e2e0260094
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
f9a4a4362d
Micro and Leonardo bootloaders for distribution are now merged with Blink sketch
2012-04-09 08:08:34 -04:00
afedb5a92b
PID and VID are no longer hard-coded in bootloader. instead they are passed in at compile-time from makefile. also added and renamed built bootloader images for Micro and Leonardo
2012-04-09 08:03:56 -04:00
083f7c8891
bugfix for Caterina not starting sketch if "verify upload" turned off in IDE.
...
Previously, if avrdude skipped the upload step the read while write memory might never be reenabled. This would prevent the bootloader from ending and the sketch from starting - the bootloader just continued to run even after a successful upload. Now enable RWW when we receive the AVR109 "Exit bootloader" 'E' command. Had to disable lock bit changing support in the bootloader to free up flash for the change - will anyone miss it?
2012-03-14 17:48:11 -04:00
cd0db83a66
changed Caterina timeout after self-programming to 500 ms (from 250 ms)
...
attempt to fix bug reported by Dave Mellis:
"avrdude: ser_close(): can’t reset attributes for device: Invalid argument"
is thrown after attempting an upload in the IDE (though the upload seems to be successful)
2012-03-14 17:07:14 -04:00
75da79ad76
give Leonardo bootloader 250 ms to finish housekeeping before leaving self-programming mode
...
Earlier approach had bootloader end as soon as it was told to. On Linux this caused problems with avrdude because the microcontroller never had a chance to send an acknowledgement.
2012-03-08 14:20:12 -05:00
53e51de832
removed old version of Leonardo's caterina bootloader, replaced with LUFA-based caterina
2012-03-08 13:47:42 -05:00
73b46de27b
made Leonardo and Micro bootloader PIDs same as sketch PIDs
2012-01-10 21:23:01 -05:00
385679caf2
restored composite and non-composite device descriptors (removed in 4b05c3fc7529477fb7031d42103c15b50a6b58be)
...
Windows wants to see both types of device descriptors.
2012-01-10 20:52:57 -05:00
29e4d73a55
reenabled HID to force Leonardo bootloader to enumerate as a composite device
2012-01-10 17:04:32 -05:00
0ed2d3c953
renamed DiskLoader to Caterina (after Leonardo's mom)
2012-01-10 16:29:47 -05:00
Federico Fissore
Cristian Maglie
Kristian Lauszus
Zachary Eveland
David A. Mellis