d3815e7e36
add PluggableUSB module
2015-07-16 13:12:14 +02:00
8518b4a545
move _initEndpoints from PROGMEM to RAM
2015-07-16 13:12:14 +02:00
f71f63a644
Use generic composite device descriptor
2015-07-16 13:12:13 +02:00
f1973e73cb
Move EP defines to header
2015-07-16 13:12:13 +02:00
60e6ec22f1
Fixed trivial include error introduced in previous commit 2e3e539b... oops...
2014-09-12 16:58:05 +02:00
2fd1c5b428
Merge branch 'usbcdc-improved' into ide-1.5.x
2014-05-26 13:38:07 +02:00
5962f155f7
Improve CDC read code
...
Read CDC data from USB FIFO on demand instead of in ISR.
Remove superfluous ring buffer.
Signed-off-by: Paul Brook <paul@nowt.org>
2014-05-24 00:34:56 +02:00
b57b2ae3c1
Fix race condition in USB CDC transmit
...
If the Start of Frame interrupt triggers just after the call
to USB_SendSpace in USB_Send then we can get data loss.
When the first bank is full and the second partially full,
the SOF handler will release the second bank via USB_Flush.
Data is then lost due to overflow as USB_Send continues writing data
to the now-closed bank.
Fix this by re-checking the FIFO status inside LockEP, immediately before
doing the data write.
Signed-off-by: Paul Brook <paul@nowt.org>
2014-05-24 00:34:56 +02:00
b9f95980c7
Fixed other trivial warnings in AVR USB core.
...
See #1877
2014-04-20 23:08:55 +02:00
15d74b2530
Removed other unused variables in CDC.cpp and HID.cpp
...
See #1877
2014-04-20 20:56:51 +02:00
40d87e96d7
Removed 'USB_MANUFACTURER' constant redefinition for known VIDs.
...
See #1877
2014-04-20 20:49:04 +02:00
ff47a782f5
Remove hardcoded product names (all provided for in boards.txt)
2013-07-17 14:38:05 +02:00
0340b90366
Fix whitespace (tabify), oops
2013-07-17 14:37:49 +02:00
a33cba585f
Allow USB product and manufacturer strings to be supplied in boards.txt
2013-07-17 14:37:29 +02:00
1668039101
Added support for Arduino Esplora
2012-12-07 18:11:07 +01:00
cfec7864e9
Adding LilyPad Arduino USB.
2012-11-01 10:45:50 -04:00
42ca56fb83
Adding Micro.
2012-10-27 14:12:26 -04:00
69fa44473b
Updating USB core to work at 8 MHz (different PLLCSR value).
2012-10-18 15:03:23 -04:00
dc86d26a11
Avoid serial buffer overrun on leonardo
2012-09-13 08:46:45 -04:00
757a77ab67
renamed Leonardo USB_ class to USBDevice_ to be unambiguous. renamed "USB" object to "USBDevice" to prevent conflict with USB Host library (thanks Massimo)
2012-05-01 11:18:15 -04:00
d755d0035d
changed PID values for Leonardo bootloader and sketch
...
done to avoid driver problems for users who installed the pre-release bootloader and driver
2012-04-25 15:56:18 -04:00
e2e0260094
Micro I hardly knew ye
2012-04-09 10:12:14 -04:00
ec83f55b62
sketch USB VID and PID values are passed in from boards.txt at compile time now. changed sketch PIDs to final values. also uncommented Micro section in boards.txt
2012-04-09 08:06:35 -04:00
b407337677
Fix for some strange behaviours during board reset
2012-03-07 16:21:04 +01:00
58fc0d17cc
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
8e0f035c9b
added automatic one-shot TX and RX LED control for sketch USB
2011-09-16 14:32:25 -04:00
7166603c89
added to sketch iProduct and iManufacturer strings identifying board as either an "Arduino Leonardo" or "Arduino Micro" manufactured by "Arduino LLC"
2011-09-16 12:29:47 -04:00
af635024db
support for non-Leonardo boards is back!
2011-08-30 11:50:08 -04:00
ddd3418a4f
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
Martino Facchin
Cristian Maglie
Paul Brook
Angus Gratton
David A. Mellis
Peter Van Hoyweghen
Zach Eveland