0ade989a2d
USB CDC two argument begin()
...
Add two argument form of Serial_::begin
Signed-off-by: Paul Brook <paul@nowt.org>
2013-09-02 19:15:12 +01:00
c2a0030473
USB serial baud arg type
...
Make USB Serial_::begin() function take an unsigned long argument for
consistency with HardwareSerial.
Signed-off-by: Paul Brook <paul@nowt.org>
2013-09-02 19:02:55 +01:00
dc86d26a11
Avoid serial buffer overrun on leonardo
2012-09-13 08:46:45 -04:00
49f7fb00fd
fixed logic bug in Caterina that could stop the bootloader from entering self-programming mode
2012-04-11 23:19:05 -04:00
ee611dc194
Revert "Revert "added a short delay and comment to boolean operator in CDC""
...
This reverts commit 200eefb4e2ac7796c5c901e8fd9369c85ec544c5.
2012-04-06 21:23:17 -04:00
02c5849501
Revert "added a short delay and comment to boolean operator in CDC"
...
This reverts commit ade4893f585e3e94fa6cf683620e1d12afc88ecd.
2012-04-06 17:36:09 +02:00
dd55096901
added a short delay and comment to boolean operator in CDC
...
Delay fixes problem where the port has been configured but not quite opened. Federico found that 10 ms was the minimum time needed to avoid problems.
2012-04-03 10:52:38 -04:00
a984b581a8
added Boolean operators to HardwareSerial and CDC to test whether the port is ready to send data.
...
Mostly useful for Leonardo - simple way to test whether the port is actually opened by an application and ready to receive data. For Serial objects attached to real UARTs always returns true.
2012-04-01 12:54:35 -04:00
8c618773b5
reduced delay before starting the Leonardo bootloader
...
Since we use a magic RAM flag to signal to the bootloader there's a risk of the sketch overwriting the magic RAM location before the bootloader starts. By reducing the watchdog timeout we reduce the chance of this happening.
2012-03-14 18:17:22 -04:00
c8ca7f9636
changed auto-reset logic for Leonardo. only do WDT manipulation if the port is opened at 1200 bps. (Dave Mellis)
2012-03-01 08:51:16 -05:00
73066a4ca2
Autoreset 1200 bps fix.
2012-02-27 17:41:38 +01:00
0138ee9b01
shortened the watchdog period for resetting Leonardo from 2 s to 250 ms. Reset into bootloader is much snappier.
2012-02-22 22:33:44 -05:00
7948125208
Leonardo now checks whether bootloader should be run after a WDT event.
...
Before the sketch initiates an auto-reset for upload it pokes a magic word into a specific RAM address. On starting the bootloader checks this address. If it finds the magic word it knows the bootloader code should run. If not it jumps straight back to sketch.
Test in a sketch by adding to setup():
wdt_enable(WDTO_2S);
Sketch should upload, start, run for two seconds, WDT, and sketch should restart (not bootloader).
Had to cut out unused descriptor code to make the bootloader still fit in 4k.
2012-02-14 12:17:30 -05:00
924e5a4846
Leonardo auto-reset-and-upload changes for Windows (explanation below)
...
On Windows COM port changes when board switched between bootloader and sketch. No way to prevent this so now Windows users have to select the upload port separate from the comm port. Also, handling of reset into bootloader was broken on Windows. Would occasionally leave the original COM port completely unusable. Changed the way this reset is initiated.
Finally, had to add upload.disable.flushing=true flag to boards.txt so IDE wouldn't try to flush the original COM port after it disappeared.
2012-02-13 00:56:06 -05:00
d7b0507e8a
fixed starting Leonardo bootloader from sketch
...
AvrdudeUploader class opens and closes Leonardo port at the magic baudrate before starting avrdude; reduced reset timeout from 250 ms to 15 ms
2012-02-03 21:42:46 -05:00
45d3b10295
Caterina now cleanly hands off operation to the sketch
...
had to remove TIMER1 operation from bootloader - was interfering with normal sketch operation
2012-01-24 18:04:10 -05:00
58fc0d17cc
added asynchronous buffering of received CDC characters
...
This fixes the issue Federico reported where bytes written by host but not read by sketch would cause serial connection to lock up. Ring buffer implementation is based on HardwareSerial.cpp.
Adds public accept() method to CDC.
2011-12-18 17:52:35 -05:00
4b7771a815
restored original non-interrupt-driven DiskLoader
...
Interrupt-driven version was a dead-end - too many bugs with that approach.
2011-11-09 14:04:59 -05:00
415a5e119d
changes in core and boards.txt to support new bootloader
...
old bootloader could fit in only 2 kB of flash. new version has to have a 4 kB block - jump-to address and boards.txt must reflect this.
2011-10-27 11:36:10 -04:00
e52cf0e420
fixed bug where sketches over 28k caused subsequent auto-reset-and-upload attempts to fail. fixed bug in reboot routine, changed fuses to select 1024-word bootloader size, disabled hardware boot enable.
2011-09-08 19:31:18 -04:00
d81084e8e9
changed auto-reset trigger condition to fix auto-reset-and-upload for Windows. now reboots when a port, opened at 1200 bps, is closed.
2011-09-06 20:58:00 -04:00
95fd39090e
changed baudrate for auto-reset-and-upload back to 1200 bps. specified arduino protocol for Leonardo avrdude upload.
2011-09-05 13:08:05 -04:00
df068274f4
on a CDC or HID write() error, call setWriteError(). better handling of USB_Send errors in CDC.
2011-08-30 17:25:35 -04:00
af635024db
support for non-Leonardo boards is back!
2011-08-30 11:50:08 -04:00
481fdeab79
CDC and HID write() routines now return non-void - brought in line with new write behavior
2011-08-30 11:04:34 -04:00
39e0796aad
auto-upload-and-reset works now at 300 bps. patched avrdude for Mac to support 300 bps connection, changed core and boards.txt to match
2011-08-27 20:32:34 -04:00
f0ac64d2db
bugfix - Serial.write() would try to send even if no CDC connection was open.
2011-08-24 21:04:30 -04:00
160bf890e0
changed auto-reset method for upload: now triggered by opening port at 1200 bps
2011-08-24 17:12:28 -04:00
84c0d2cff8
Temporary fix for auto-reset from IDE. Will reset chip when DTR is asserted, no matter what CDC baud rate is selected.
2011-08-16 13:43:55 -04:00
ddd3418a4f
Serial via USB works
...
Integrated rest of Peter's USB implementation
2011-08-14 16:59:34 -04:00
Paul Brook
Peter Van Hoyweghen
Zach Eveland
Federico Vanzati
Cristian Maglie