Matthijs Kooijman 394e4d24a8 Prevent low pulse on TX initialization in SoftwareSerial ... Previously, the TX pin would be set to output first and then written high (assuming non-inverted logic). When the pin was previously configured for input without pullup (which is normal reset state), this results in driving the pin low for a short when initializing. This could accidenttally be seen as a stop bit by the receiving side. By first writing HIGH and then setting the mode to OUTPUT, the pin will have its pullup enabled for a short while, which is harmless.		2015-01-26 17:04:26 +01:00
..
examples	Revert "SoftwareSerial library to the new format"	2013-11-15 12:54:59 +01:00
SoftwareSerial.cpp	Prevent low pulse on TX initialization in SoftwareSerial	2015-01-26 17:04:26 +01:00
SoftwareSerial.h	Fix SoftwareSerial timings	2015-01-26 17:03:25 +01:00
keywords.txt	Revert "SoftwareSerial library to the new format"	2013-11-15 12:54:59 +01:00
library.properties	missing paragraph field in library.properties	2014-07-18 20:08:01 +02:00