8 lines
434 B
Plaintext
8 lines
434 B
Plaintext
To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader:
|
|
1. unpack the source into LUFA's Bootloader directory
|
|
2. set ARDUINO_MODEL_PID in the makefile as appropriate
|
|
3. do "make clean; make; make program"
|
|
|
|
Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory)
|
|
|