fix SetupClock168() for Netduino2Plus + add STM32Stamp/Netduino2Plus boards + add dfuse_addr in upload

STM32F4/boards.txt

@@ -30,4 +30,64 @@ discovery_f407.build.error_led_pin=14
 #discovery_f407.build.gcc_ver=gcc-arm-none-eabi-4.8.3-2014q1
 
 ##############################################################
+stm32f4stamp.name=STM32F4Stamp F405
+
+stm32f4stamp.upload.tool=maple_upload
+stm32f4stamp.upload.protocol=maple_dfu
+
+#stm32f4stamp.upload.use_1200bps_touch=false
+stm32f4stamp.upload.file_type=bin
+stm32f4stamp.upload.ram.maximum_size=196608
+stm32f4stamp.upload.flash.maximum_size=1048576
+stm32f4stamp.upload.maximum_size=1048576
+
+stm32f4stamp.upload.usbID=0483:df11
+stm32f4stamp.upload.altID=0
+#stm32f4stamp.upload.auto_reset=true
+stm32f4stamp.upload.dfuse_addr=0x8000000
+
+stm32f4stamp.build.mcu=cortex-m4
+stm32f4stamp.build.f_cpu=168000000L
+stm32f4stamp.build.core=maple
+stm32f4stamp.build.extra_flags=-DMCU_STM32F406VG -mthumb -DSTM32_HIGH_DENSITY -march=armv7-m  -DSTM32F2 -DBOARD_discovery_f4
+stm32f4stamp.build.ldscript=ld/jtag.ld
+stm32f4stamp.build.variant=discovery_f407
+stm32f4stamp.build.variant_system_lib=lib_f407.a
+stm32f4stamp.build.vect=VECT_TAB_BASE
+stm32f4stamp.build.density=STM32_HIGH_DENSITY
+stm32f4stamp.build.error_led_port=GPIOD
+stm32f4stamp.build.error_led_pin=14
+#stm32f4stamp.build.gcc_ver=gcc-arm-none-eabi-4.8.3-2014q1
+
+##############################################################
+netduino2plus.name=Netduino2 F405
+
+netduino2plus.upload.tool=maple_upload
+netduino2plus.upload.protocol=maple_dfu
+
+#netduino2plus.upload.use_1200bps_touch=false
+netduino2plus.upload.file_type=bin
+netduino2plus.upload.ram.maximum_size=196608
+netduino2plus.upload.flash.maximum_size=1048576
+netduino2plus.upload.maximum_size=1048576
+
+netduino2plus.upload.usbID=0483:df11
+netduino2plus.upload.altID=0
+#netduino2plus.upload.auto_reset=true
+netduino2plus.upload.dfuse_addr=0x8000000
+
+netduino2plus.build.mcu=cortex-m4
+netduino2plus.build.f_cpu=168000000L
+netduino2plus.build.core=maple
+netduino2plus.build.extra_flags=-DMCU_STM32F406VG -mthumb -DSTM32_HIGH_DENSITY -march=armv7-m  -DSTM32F2 -DBOARD_discovery_f4
+netduino2plus.build.ldscript=ld/jtag.ld
+netduino2plus.build.variant=discovery_f407
+netduino2plus.build.variant_system_lib=lib_f407.a
+netduino2plus.build.vect=VECT_TAB_BASE
+netduino2plus.build.density=STM32_HIGH_DENSITY
+netduino2plus.build.error_led_port=GPIOD
+netduino2plus.build.error_led_pin=14
+#netduino2plus.build.gcc_ver=gcc-arm-none-eabi-4.8.3-2014q1
+
+##############################################################
 

STM32F4/cores/maple/libmaple/rccF2.c

@@ -360,7 +360,11 @@ void SetupClock168MHz()
 	/******************************************************************************/
 	/************************* PLL Parameters *************************************/
 	/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */
+#ifdef ARDUINO_STM32F4_NETDUINO2PLUS
+	int PLL_M = 25; // The NETDUINO has a 25MHz external oscillator
+#else
 	int PLL_M = 8;
+#endif
 	int PLL_N = 336;
 
 	/* SYSCLK = PLL_VCO / PLL_P */

STM32F4/platform.txt

@@ -105,10 +105,11 @@ tools.maple_upload.cmd.windows=maple_upload.bat
 #tools.maple_upload.cmd.linux=
 tools.maple_upload.path={runtime.hardware.path}/tools/win
 tools.maple_upload.path.macosx={runtime.hardware.path}/tools/macosx
+tools.maple_upload.path.linux={runtime.hardware.path}/tools/linux
 
 tools.maple_upload.upload.params.verbose=-d
 tools.maple_upload.upload.params.quiet=
-tools.maple_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin"
+tools.maple_upload.upload.pattern="{path}/{cmd}" {serial.port.file} {upload.altID} {upload.usbID} "{build.path}/{build.project_name}.bin" {upload.dfuse_addr}
 
 # Generic STM32 upload via serial to Serial Port 1 (pins PA9 and PA10) - note. Boot0 line needs to high on board reset to enable upload via serial
 # at the end of the upload the program is automatically run, without the board being reset

tools/linux/maple_upload

@@ -6,7 +6,12 @@ if [ $# -lt 4 ]; then
     echo "Usage: $0 $# <dummy_port> <altID> <usbID> <binfile>" >&2
     exit 1
 fi
-dummy_port=$1; altID=$2; usbID=$3; binfile=$4
+dummy_port=$1; altID=$2; usbID=$3; binfile=$4; 
+if [ $# -eq 5 ]; then
+    dfuse_addr="--dfuse-address $5"
+else
+    dfuse_addr=""
+fi
 
 #DFU_UTIL=$(dirname $0)/dfu-util/dfu-util
 DFU_UTIL=/usr/bin/dfu-util
@@ -15,4 +20,4 @@ if [ ! -x ${DFU_UTIL} ]; then
     exit 2
 fi
 
-${DFU_UTIL} -d ${usbID} -a ${altID} -D ${binfile}
+${DFU_UTIL} -d ${usbID} -a ${altID} -D ${binfile} ${dfuse_addr}