noisymime
/
Arduino_STM32
mirror of https://github.com/noisymime/Arduino_STM32.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'SDIO_patch' of https://github.com/victorpv/Arduino_STM32 into victorpv-SDIO_patch

This commit is contained in:
Roger Clark 2018-04-01 15:26:04 +10:00
parent a478c47874 5c3c9af241
commit d94f864979
1 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
STM32F1/system/libmaple/include/libmaple/sdio.h
View File

@ -52,19 +52,19 @@ extern "C" {
// SDIO register map type
typedef struct sdio_reg_map {
__IO uint32 POWER; // 0x00
__IO uint32 CLKCR; // 0x04
__IO uint32 ARG; // 0x08
__IO uint32 CMD; // 0x0C
__IO uint32 RESPCMD; // 0x10 (0x3F)
const uint32 RESP[4]; // 0x14 - contain the card status, which is part of the received response.
__IO uint32 DTIMER; // 0x24 - contains the data timeout period, in card bus clock periods.
__IO uint32 DLEN; // 0x28 (0x01FF FFFF) - contains the number of data bytes to be transferred
__IO uint32 DCTRL; // 0x2C
__IO uint32 DCOUNT; // 0x30 (0x01FF FFFF)
__IO uint32 STA; // 0x34
__IO uint32 ICR; // 0x38
__IO uint32 MASK; // 0x3C
__io uint32 POWER; // 0x00
__io uint32 CLKCR; // 0x04
__io uint32 ARG; // 0x08
__io uint32 CMD; // 0x0C
__io uint32 RESPCMD; // 0x10 (0x3F)
__io const uint32 RESP[4]; // 0x14 - contain the card status, which is part of the received response.
__io uint32 DTIMER; // 0x24 - contains the data timeout period, in card bus clock periods.
__io uint32 DLEN; // 0x28 (0x01FF FFFF) - contains the number of data bytes to be transferred
__io uint32 DCTRL; // 0x2C
__io uint32 DCOUNT; // 0x30 (0x01FF FFFF)
__io uint32 STA; // 0x34
__io uint32 ICR; // 0x38
__io uint32 MASK; // 0x3C
const uint32 RESERVED1[2];
__IO uint32 FIFOCNT; // 0x48 (0x01FF FFFF)
const uint32 RESERVED2[13];
@ -95,7 +95,7 @@ extern sdio_dev * SDIO;
// After a data write, data cannot be written to this register for three SDIOCLK clock periods
// plus two PCLK2 clock periods. SDIO_CK can also be stopped during the read wait interval
// for SD I/O cards: in this case the SDIO_CLKCR register does not control SDIO_CK.
#define SDIO_CLKCR_HWFC_EN (1<<14) // HW Flow Control enable - DON'T USE!!! (see errata sheet 2.12.1)
#define SDIO_CLKCR_HWFC_EN (1<<14) // HW Flow Control enable - DON'T USE in F4!!! (see errata sheet 2.12.1)
// Overrun errors (Rx mode) and FIFO underrun (Tx mode)
// should be managed by the application software.
#define SDIO_CLKCR_NEGEDGE (1<<13) // SDIO_CK de-phasing selection bit - DON'T USE!!! (see errata sheet 2.12.4)
@ -106,7 +106,7 @@ extern sdio_dev * SDIO;
#define SDIO_CLKCR_PWRSAV (1<<9) // 0: SDIO_CK clock is always enabled, 1: SDIO_CK is only enabled when the bus is active
#define SDIO_CLKCR_CLKEN (1<<8) // Clock enable
#define SDIO_CLKCR_CLKDIV (0xFF) // SDIO_CK = SDIOCLK / [CLKDIV + 2]
#define SDIOCLK 72000000UL // SDIO master clock frequency
#define SDIOCLK PCLK2 // SDIO master clock frequency
// SDIO_CMD register bits
// After a data write, data cannot be written to this register for three SDIOCLK clock periods