f90929bfa8
Added dfu-util src as a sub module, also added compiled dfu-util files to tools/linux and added script to set udev rules, which I took from the old Maple IDE
2015-05-10 20:26:17 +10:00
766f9f37e1
Fixed issue with empty line at top of linux stlink_upload script (issue #48 )
2015-05-05 21:39:21 +10:00
5916e8c3be
Updated linux stlink_upload
2015-05-05 10:06:31 +10:00
e7e552fef6
Accidenly updated the linux serial_upload instead of stlink upload, so I have re-instated its contents
2015-05-05 10:05:22 +10:00
666b5b3da3
Updated stlink_upload script for Linux to enhanced code from @ahull
2015-05-05 08:13:32 +10:00
4f9a83e08b
added linux32 versions of stm32flash and stlink binaries and used scripts from OSX for these in linux as the scripts are identical
2015-05-02 19:09:45 +10:00
3d17dbce37
Added Windows binaries for Texane-stlink, and changed Windows stlink ulload bat file to use the new files. Tested and working on STM32F103C8 using 'STM32 to Flash (no bootloder)' board type
2015-04-29 20:52:38 +10:00
bbf58007fa
Removed .o and .a files from stm32flash src that should not have been tracked in the first place
2015-04-18 11:25:09 +10:00
1faf1d6b0d
Using modified version of latest fork of stm32flash
2015-04-18 11:24:00 +10:00
0f78542eef
Fixed issue with stm32flash for Windows, where double digit COM ports didn't work e.g COM10 would not work
2015-04-18 08:08:59 +10:00
6df2be1012
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-04-12 10:28:56 +10:00
4a3da022b8
Updated platform.txt and added platform rewrite keys file to aid operation with IDE 1.6.2 onwards
2015-04-12 10:05:32 +10:00
7abe8ebdbf
Updated linux upload router with version from @ahull
2015-04-07 08:50:06 +10:00
8b3b13680e
Attempted to set execut permissions on upload_router on linux, from OSX
2015-04-07 08:17:21 +10:00
0e318d746d
Added texane-stlink to tools src folder. Note. This was easier than moving it from the old location under macosx. I will remove the one under macosx once the new one is definately committed
2015-04-07 08:15:22 +10:00
0e879acb54
Moved stm32flash source to a separate src folder rather than being inside tools/macosx
2015-04-07 08:06:37 +10:00
353b7bf995
Added new / recompiled stm32flash.exe for windows using MinGW so that Windows versions now supports the same processors as the OSX and Linux version (Specifically some STM32F103C8 devices)
2015-04-02 07:24:20 +11:00
d7cf10c6ee
Added linux upload_router script. Please note, Linux users may need to set execute permissions on this file. I can't however do this when commiting the file from my Windows machine
2015-03-09 01:52:39 +11:00
d8f7103e1c
Added STLink to upload_router.bat and changed STM32 to Flash board type so that a new menu of UploadMethod allows selection of upload via Serial or STLink
2015-02-03 09:55:13 +11:00
59b3c0194f
Improved mac OSX maple uploads, with the help of Tim Schuerewegen, by resetting using tty to reset the Maple via the com port and also added the -R option to dfu-util to run after upload
2015-01-28 20:29:27 +11:00
26e298dcf4
Added texan/stlink as a sub repo to macosx for st-link support. Note, there may be a better location for this as its cross platform source and could be used for Linux as well
2015-01-22 16:05:31 +11:00
7e1155125c
Replace st-link OSX binaries for ones that work on 10.7 and fixed issue in OSX stlink_upload bash script
2015-01-22 15:48:22 +11:00
66d320b33b
Updated STLink upload for OSX. Note this doesnt work on OSX 10.7, but it may work on nnewer versions of OSX. It has been reported to work on 10.9
2015-01-22 15:09:25 +11:00
39d28ca13d
Added gitignore to prevent osx system files being included, and fixed issues in serial_upload for osx
2015-01-20 21:30:38 +11:00
078cf1c623
Added files for OSX Serial upload via stm32flash binary compiled for osx
2015-01-20 21:07:39 +11:00
3a54d9fcfe
Fix maple_upload to fall back to /opt/local/bin/dfu_util if not in /usr/local/bin
2015-01-10 08:59:11 +00:00
068c44f36b
Merge pull request #17 from taoyuan/master
...
Moved dfu_util location on OSX to match install location of files if Homebrew is used to install. The wiki has been updated to include instructions to use Homebrew to install DFU-Utils
2015-01-01 08:46:53 +11:00
9e46a4ecc4
Set file permissions on linux/maple_upload to 755
2014-12-30 12:45:25 +00:00
25383c7185
fixed dfu_util location on osx
2014-12-30 18:08:02 +08:00
850413e13d
Added files and made changes to support linux upload
2014-12-30 08:26:50 +11:00
37d6f13990
Added upload via STLink - currently not used
2014-12-27 12:51:14 +11:00
9de8d1d058
microduino: Add OS X version of maple_upload script
...
Currently this is a wrapper around dfu-util; tested with
dfu-util-0.7.mpkg, e.g.
https://code.google.com/p/companion9x/downloads/detail?name=dfu-util-0.7.mpkg
2014-12-23 15:46:14 +00:00
98c772079e
Added new menu items by Alexey (@HiddenPilot)
2014-12-19 08:31:49 +11:00
79668ed667
Put fix for D: drive (etc) use into maple_upload.bat, that had previously only been added to serial_upload.bat
2014-12-04 07:07:23 +11:00
21732162c1
Modified serial_upload.bat so that it would work for windows system using D: etc for the Arduino folder
2014-12-03 08:27:52 +11:00
8c6d25b4c0
Absolutely masses of changes, and general restructure in order to get the SPI library to at least compile ;-)
2014-11-22 06:46:57 +11:00
bcb767bba9
added modified version of python serial uploader (which now has a -g option for GO, and tested it but rem ed out in serial_upload.bat
2014-11-04 08:32:36 +11:00
364c0c07f0
Changed upload speed to 203400 which seems to work for my USB to Serial adaptor, remove -b 203400 from tools/upload_serial.bat if this causes a problem, also there seemed to be an issue of EEPROM lib not compiling any more, so I commented out 2 includes which it could not find but seemed not to be needed any more.
2014-11-03 08:53:01 +11:00
2c2bf241be
Added existing files
2014-10-30 00:36:47 +11:00
Roger Clark
rogerclarkmelbourne
Roger Clark
Ian Harvey
Bob Cousins
Tao Yuan