4ec1b0f0cd
Removed references to robotis bootloader, and also redundant usb reset code that used the wdt (possibly used by the robotis bootloader)
2018-05-10 20:25:02 +10:00
6c33d73f63
Add SDIO pin definitions to the Maple RET6 variant
...
It was missing, but needed since that variant (RET6) includes the SDIO peripheral, so the files are included in the compilation.
2018-05-03 11:39:17 -05:00
1f85ecb3b9
Added PLL Mulplier setting for 16MHz. Note this change does not add 16Mhz menu options to any boards, it simply supports them if they were added
2018-04-13 15:03:03 +10:00
da34bb5bb3
Merge branch 'Wunused-parameter' of https://github.com/lacklustrlabs/Arduino_STM32 into lacklustrlabs-Wunused-parameter
2017-12-03 10:54:51 +11:00
95dde2ec10
Removed pinMode from PIN_MAP
2017-12-01 17:17:28 +01:00
aebb14f26c
Rollback to master
2017-12-01 16:54:16 +01:00
29ff4e739d
Fixed 'warning: missing initializer for member ... [-Wmissing-field-initializers]'
2017-11-16 19:20:25 +01:00
8d9e2f24b6
Suppressing 'warning: unused parameter ... [-Wunused-parameter]'
2017-11-15 23:19:31 +01:00
908a57a28e
Suppressing 'warning: missing initializer for member ... [-Wmissing-field-initializers]'
2017-11-15 22:56:00 +01:00
cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
7dcbbc85b0
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
2017-01-09 20:27:07 +11:00
9147a461e7
Merge branch 'master' of https://github.com/bubulindo/Arduino_STM32 into bubulindo-master
2016-09-26 10:42:42 +10:00
0b34af3b6a
Minor bug fixes now that I have a ZET6
...
While using a different board, I realized that I did not configure the
ADC on all variants and there is a minor bug on the irq_num for
advanced 103 devices.
2016-09-25 13:14:12 +01:00
0909f4c20d
Changed defines for MOSI, MISO etc into const static vars, to address compatibility issues
2016-05-03 20:23:51 +10:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
6b6ab7dab5
Implemented PIN MAP in flash for all other variants
2015-09-01 19:58:39 +10:00
58df3f36b4
Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device
2015-05-31 16:09:26 +10:00
e3d460d566
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
2015-05-13 20:33:30 +10:00
0631786008
Added Maple RET6 board provided by @skyng22003. Tested and compiles OK, but I'm unable to test as I don't have that hardware
2015-04-30 12:17:08 +10:00
Roger Clark
victorpv
lacklustrlabs
Bubulindo
rogerclarkmelbourne