Alexandr Zarubkin
|
134dad770c
|
Added preprocessor symbol USE_HSI_CLOCK which enables HSI clocking for generic variants. By default, HSE clocking scheme is used, as before this change.
Signed-off-by: Alexandr Zarubkin <me21@yandex.ru>
|
2018-05-21 17:02:24 +03:00 |
Roger Clark
|
1f85ecb3b9
|
Added PLL Mulplier setting for 16MHz. Note this change does not add 16Mhz menu options to any boards, it simply supports them if they were added
|
2018-04-13 15:03:03 +10:00 |
|
Roger Clark
|
cb901b4e4f
|
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
|
2017-07-30 17:43:40 +10:00 |
|
Roger Clark
|
7dcbbc85b0
|
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
|
2017-01-09 20:27:07 +11:00 |
|
Roger Clark
|
896cb2d3c7
|
Increase generic boards USB reset delay to fix issue with newer PC's
|
2016-05-15 15:16:27 +10:00 |
|
Roger Clark
|
88d2457f30
|
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
|
2015-09-06 07:51:40 +10:00 |
rogerclarkmelbourne
|
7fe2e7806a
|
Disabled generic bootloader USB reset
|
2015-05-24 09:15:43 +10:00 |
|
rogerclarkmelbourne
|
6a2e51585d
|
Added DFU upload options for all generic boards. Note, Its not possible to set the correct memort size in the linker file for DFU uploads, so its always set as having the max ram and rom for the series in question. So beware using this if you are maxing out the RAM or Flash (which seems highly unlikely!)
|
2015-05-22 21:07:57 +10:00 |
|
rogerclarkmelbourne
|
cbc78edce3
|
Include VictorPV's usb reset code to all generic board when SERIAL_USB is enabled ( by the defined in boards.txt)
|
2015-05-16 21:54:10 +10:00 |
|
rogerclarkmelbourne
|
e3d460d566
|
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
|
2015-05-13 20:33:30 +10:00 |
|
rogerclarkmelbourne
|
fddefc13a9
|
Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards
|
2015-04-25 15:28:45 +10:00 |
|
Roger Clark
|
6fec429e99
|
Made new generic STM32F103C board variant based on Maple mini. This is a work in process. It seems to work, but needs more tidying up ;-)
|
2015-04-14 20:18:37 +10:00 |