134dad770c
Added preprocessor symbol USE_HSI_CLOCK which enables HSI clocking for generic variants. By default, HSE clocking scheme is used, as before this change.
...
Signed-off-by: Alexandr Zarubkin <me21@yandex.ru>
2018-05-21 17:02:24 +03:00
4ec1b0f0cd
Removed references to robotis bootloader, and also redundant usb reset code that used the wdt (possibly used by the robotis bootloader)
2018-05-10 20:25:02 +10:00
1f85ecb3b9
Added PLL Mulplier setting for 16MHz. Note this change does not add 16Mhz menu options to any boards, it simply supports them if they were added
2018-04-13 15:03:03 +10:00
8d9e2f24b6
Suppressing 'warning: unused parameter ... [-Wunused-parameter]'
2017-11-15 23:19:31 +01:00
cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
f7a576f2e0
Fixed issue with PB10 being set to OUTPUT for use as a USB Disconnect control on boards which do not have the additional USB disconnect hardware e.g. the Blue Pill. Note. Some variants seem to have the disconnect control on another pin, so I did not change those in case they were actually used
2017-06-25 13:08:30 +10:00
f2c2323afd
Changed board variants to use calculate value from F_CPU for CYCLES_PER_MICROSECOND
2017-05-26 16:22:16 +10:00
7dcbbc85b0
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
2017-01-09 20:27:07 +11:00
9147a461e7
Merge branch 'master' of https://github.com/bubulindo/Arduino_STM32 into bubulindo-master
2016-09-26 10:42:42 +10:00
0b34af3b6a
Minor bug fixes now that I have a ZET6
...
While using a different board, I realized that I did not configure the
ADC on all variants and there is a minor bug on the irq_num for
advanced 103 devices.
2016-09-25 13:14:12 +01:00
896cb2d3c7
Increase generic boards USB reset delay to fix issue with newer PC's
2016-05-15 15:16:27 +10:00
0909f4c20d
Changed defines for MOSI, MISO etc into const static vars, to address compatibility issues
2016-05-03 20:23:51 +10:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
6b6ab7dab5
Implemented PIN MAP in flash for all other variants
2015-09-01 19:58:39 +10:00
207986431d
Added STM32F103R8 / RB variant folder supplied by @ahull. Also made minor change to the stm32f103r folder bootloader link file name, so that the same file name could be used in the existing stm32f103r folder and the new folder (but they have different contents)
2015-08-10 20:27:09 +10:00
Alexandr Zarubkin
Roger Clark
lacklustrlabs
Bubulindo