377217c9f5
CoOS 1.12 and 1.1.6 (latest), and FreeRTOS 8.2.1
...
Ported FreeRTOS 8.2.1 by finding the changes in the 7.0.1 version and
carrying them over. Then found an almost working port of CoOS, and
corrected it to work, and then carried the changes to 1.1.6 Tested all
of them with USBSerial, GPIO, SPI, DMA and a DMA ISR all working fine.
Similar examples ported to all of them.
2015-05-21 22:44:41 -05:00
e13b9a0709
SPI DMA functions.
...
Adds 6 new functions: DMA Transfer, DMA 8bit send, DMA 16bit send, write
16 bit int. and mode change to change between 8bit and 16 bit transfer.
2015-05-21 22:35:40 -05:00
331a02e296
Updated BlackMagicProbe upload pattern in platform.txt, and commented out windows specific upload lines
2015-05-20 19:38:16 +10:00
973fa0268e
Added Black Magic Probe upload support for C series boards, Note Windows BAT file has not been tested yet
2015-05-19 21:44:10 +10:00
89d3262d17
Movred FreeRTOS from untested into the libraries folder now its been tested by @victor_pv
2015-05-19 07:45:47 +10:00
cbc78edce3
Include VictorPV's usb reset code to all generic board when SERIAL_USB is enabled ( by the defined in boards.txt)
2015-05-16 21:54:10 +10:00
f69d71ba9d
Fixed issue with DFU upload ID for F103V board
2015-05-14 20:00:15 +10:00
a6957b748f
Merge branch 'master' of https://github.com/rogerclarkmelbourne/arduino_stm32
2015-05-13 20:34:20 +10:00
e3d460d566
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
2015-05-13 20:33:30 +10:00
2ab2e5cac7
Changed definition for BOARD_HAVE_SERIALUSB so its always true (1) so that compiling in of SERIAL_USB is just controlled by the -DSERIAL_USB flag and not reliant on the DISC pin defintions. Also added experimental code into the ZET to reset USB on startup - this is not fully working, but doesnt seem to cause any ill effects
2015-05-13 19:31:23 +10:00
f90929bfa8
Added dfu-util src as a sub module, also added compiled dfu-util files to tools/linux and added script to set udev rules, which I took from the old Maple IDE
2015-05-10 20:26:17 +10:00
8c0004f573
Updated size calculation recipe regex with new version from @victor_pv
2015-05-09 18:29:31 +10:00
115bb6ebbf
Added pulseIn API function
2015-05-09 15:11:35 +10:00
0c7ac4c1bb
Fixed issue with Maple RET6 in boards.txt - already fixed in PIN_MAP-in-FLASH branch
2015-05-07 21:16:23 +10:00
311b36450c
Defined DEBUG_LEVEL=DEBUG_NONE in platform.txt so that it doesnt get defaulted to DEBUG_ALL in util.h, as this causes extra, unused code to be added. This change seems to save around 1.5k to the total on an empty sketch
2015-05-07 13:55:44 +10:00
8d63e96246
Merge branch 'master' of https://github.com/rogerclarkmelbourne/Arduino_STM32
2015-05-07 12:56:22 +10:00
1df09212c0
Updated Nucleo F103RB variant with files from Matthias
2015-05-07 12:55:58 +10:00
a0ca5b6938
Updated F4 to add STM pin numbers and change processor to cortex-m4 instead of cortex-m3
2015-05-06 15:08:34 +10:00
bb535029cb
updated setup_nvic for maple mini, which seems to have been missed when I made the changed to do with removing VECT_TAB_FLASH
2015-05-06 03:09:15 +10:00
13e27c1dc5
Renamed generic_stm32f103rxx and generic_stm32f103zxx to remove th e xx at the end to match changes to boards.txt
2015-05-06 03:02:10 +10:00
30946d8a1c
Fixed another typo in boards.txt
2015-05-05 23:21:34 +10:00
766f9f37e1
Fixed issue with empty line at top of linux stlink_upload script (issue #48 )
2015-05-05 21:39:21 +10:00
d9e5f1ed4d
Removed typo in flash size of generic stm32f103cb board type name
2015-05-05 21:34:10 +10:00
15cdd88daa
Tidied boards.txt and made change to platform.txt to support changes to boards.txt
2015-05-05 11:16:01 +10:00
5916e8c3be
Updated linux stlink_upload
2015-05-05 10:06:31 +10:00
e7e552fef6
Accidenly updated the linux serial_upload instead of stlink upload, so I have re-instated its contents
2015-05-05 10:05:22 +10:00
666b5b3da3
Updated stlink_upload script for Linux to enhanced code from @ahull
2015-05-05 08:13:32 +10:00
4f9a83e08b
added linux32 versions of stm32flash and stlink binaries and used scripts from OSX for these in linux as the scripts are identical
2015-05-02 19:09:45 +10:00
0901ab89af
Fixed issue with missing dot (period) in definition of max ram for maple mini original bootloader params
2015-05-02 16:24:40 +10:00
10861ba517
Updated Bootloader 2.0 to remove RAM upload option. RAM upload now returns DFU error errWRITE ( 0x03) and displays the initial message 'Bootloader 2.0 ERROR. Upload to RAM is not supported'. Ram upload code has been commented out, definitions have been added for DFU alt strings to make them easier to change, not javascript util has been added at the bottom usb_description.c which can be used to generate modified DFU ALT ID descriptor text if needed
2015-05-02 14:56:52 +10:00
0631786008
Added Maple RET6 board provided by @skyng22003. Tested and compiles OK, but I'm unable to test as I don't have that hardware
2015-04-30 12:17:08 +10:00
5fd0efa673
Updated and renames STM32 to Flash, so that STLink works better on Windows. Thanks to Rick Kimball, on the stm32duino.com forum
2015-04-29 21:20:42 +10:00
3d17dbce37
Added Windows binaries for Texane-stlink, and changed Windows stlink ulload bat file to use the new files. Tested and working on STM32F103C8 using 'STM32 to Flash (no bootloder)' board type
2015-04-29 20:52:38 +10:00
0d87f72bd8
Updated Nucleo_f103rb variant files with new versions from @madias
2015-04-28 17:40:11 +10:00
808ca51822
Removed old version of bootloader (which I'd forgotten I'd added a while ago. It has been superseded by the new / improved version in the usb_bootloder folder
2015-04-26 20:08:24 +10:00
30c088e6a1
Bootloader. Fixed bug in upload to RAM and updated the maple mini binary. Note upload to RAM has not been tested as the Maple mini doesn't have enough RAM to test with
2015-04-26 17:13:37 +10:00
4d5ccb3a15
Fixed issue with u8_usbConfigDescriptorDFU. I'm not sure how it could have been working before, after I added the new ALT ID. And updates maple_mini_boot20.bin
2015-04-26 16:59:59 +10:00
e163e3c1ae
Bootloader and also boards.txt, so that its backwards compatible with the original bootloader. The new bootloader now has an additional altID for the new upload type (ID2) which is set in boards.txt for the maple mini on the Bootloader version menu. Note there was also a bug in the old version of boards.txt where the upload size params were not being set by the Bootloader version menu. Binaries folder has also been updated with the revised bootloader
2015-04-26 16:31:32 +10:00
dc1262cad6
Changed bootloader linker settings, so match the space allocated in Flash by the sketch (offset to 0x8002000)
2015-04-26 11:29:41 +10:00
6a3668619e
Change USB descripter string to show correct upload address 0x8002000
2015-04-26 08:24:37 +10:00
cdf0fc0d65
Fixed small issue with incorrect flash and ram sizes being reported to the IDE for maple mini, orignal and bootloader 2.0
2015-04-25 20:47:34 +10:00
f92904f577
Added support for bootloader 2.0 to Maple mini, and added source and binary for maple_mini_boot20.bin to the repo
2015-04-25 19:15:48 +10:00
eb4edd90af
Added usb_bootloader, taken from the latest files of https://github.com/jonatanolofsson/maple-bootloader commit id 5f09352278faf1b31b9e1bbef7c00f1469fb63b8, then checked out the maple mini (mini-boot) branch, as that branch seems to contain the most fixes and updates.
2015-04-25 16:44:17 +10:00
fddefc13a9
Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards
2015-04-25 15:28:45 +10:00
badf7057f0
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
2015-04-25 10:41:27 +10:00
4d3c370314
added bootloader and non bootloder version of STM32F103RE to STM32F103R series boards
2015-04-20 12:26:16 +10:00
6408adc02f
Added experimental Maple RET6 board for @skyng22003
2015-04-20 10:17:58 +10:00
5ae71423df
Fixed typo / bug in USART5
2015-04-20 10:10:43 +10:00
7b980c433e
Fix for missing UART 4 and 5 from STM32F104RE and STM32F103Z series boards. Note this code has not been fully tested
2015-04-20 09:50:33 +10:00
bbf58007fa
Removed .o and .a files from stm32flash src that should not have been tracked in the first place
2015-04-18 11:25:09 +10:00
victorpv
rogerclarkmelbourne
Roger Clark