0ec837f08c
Fix for uninitialised vars in dmaTransfer and dmaSend (as detailed by victor_pv)
2015-07-28 12:00:16 +10:00
07ba8f279a
Updaded SPI with update from VictorPV
2015-07-26 04:58:12 +10:00
fc50831843
Continued with SPI setModule - still doesnt work when I tried setModule(2);
2015-07-08 11:14:57 +10:00
20a9214291
Some fixes. Works for SD example SPI 1, not tested with anything else. setModule not tested
2015-07-07 20:59:33 +10:00
2e13a1d57e
Initial attempt at SPI setModule - but it doesn't seem to work for SPI2 etc, even when not using setModule to select the SPI channel, when I tested with a VS1053 board attached to SPI2 and SD on SPI1
2015-07-07 07:27:09 +10:00
501da92986
Added a line in SPI.cpp to default the bitOrder to MSBFIRST
2015-06-25 09:36:23 +10:00
7d7f113f63
improved vasillis's SPI 2 demo
2015-06-12 09:49:00 +10:00
1a676200f7
Example of using the SPI_1 and SPI_2 ports on STM32F103.
2015-06-11 15:01:45 +03:00
657d6dae02
Alternative / better fix provided by @pico based on work by @victor_pv. Commented out AF REMAP of NSS in spi_f1.c
2015-06-10 10:33:13 +10:00
ece9c3681d
Added code to 'get' the gpio mode of a pin, and have used it in SPIClass::begin() to store and reinstate the pin mode of the SPI NSS pin. This is a work around for 'features' in the STM32 silicon, which seem to change the GPIO mode of the SPI NSS (hardware - 'Software Select' pin)
2015-06-10 10:25:22 +10:00
2797907221
Added support for SPI 2 to VS1003 library, and made a change to SPI to support other libs being able to select which SPI they want to use (issue with const in transfer()
2015-06-06 07:46:42 +10:00
d165e4d013
SPI updated to eliminate warnings
...
The same write function works for both 8bit and 16bit transfers, so
eliminated the 8bit one and that takes out warnings when the compiler is
not sure of the width. Tested with both ILI libraries (_STM and not STM)
2015-05-27 20:16:15 -05:00
e13b9a0709
SPI DMA functions.
...
Adds 6 new functions: DMA Transfer, DMA 8bit send, DMA 16bit send, write
16 bit int. and mode change to change between 8bit and 16 bit transfer.
2015-05-21 22:35:40 -05:00
664e1c88ac
Second attempt at SPI::DMATransfer. Now uses separate tx and rx buffers, and I also added code to wait for tx to complete and SPI to not be busy before exiting the function. Note. Operation of rx buffer has not been tested
2015-03-30 06:47:26 +11:00
5f9e8a04dd
Added first pas at SPI::DMATransfer(byte *buf, int length) - and updated ILI9341 lib to use DMA Transfer for fill rect
2015-03-30 03:31:41 +11:00
e9f67b2f63
Added accessor function for the spi device to spi.h
2015-03-18 20:32:56 +11:00
ac742edbd7
Improved speed of SPI::write(byte)
2015-03-06 22:40:53 +11:00
29ddd3beef
Update SPI library properties file to fix issue caused by changing folder namne from STM32F1XX to STM32F1
2015-02-26 07:45:16 +11:00
5f83c13285
renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4
2015-02-24 20:13:04 +11:00
Roger Clark
rogerclarkmelbourne
Vassilis Serasidis
victorpv