Jean-Claude Wippler
|
dbd81d42af
|
add generic STM32F103T[8B] variants
|
2015-10-27 10:41:08 +01:00 |
Roger Clark
|
88d2457f30
|
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
|
2015-09-06 07:51:40 +10:00 |
|
Roger Clark
|
6b6ab7dab5
|
Implemented PIN MAP in flash for all other variants
|
2015-09-01 19:58:39 +10:00 |
victorpv
|
7564830669
|
Edits to move pinmap to flash
Initial comit, not tested, but copied from previous working folder.
|
2015-08-25 00:02:57 -05:00 |
|
Roger Clark
|
207986431d
|
Added STM32F103R8 / RB variant folder supplied by @ahull. Also made minor change to the stm32f103r folder bootloader link file name, so that the same file name could be used in the existing stm32f103r folder and the new folder (but they have different contents)
|
2015-08-10 20:27:09 +10:00 |
Colin
|
7d45f68fde
|
Update PIN_MAP to allow PWM on PB9
|
2015-07-09 12:47:33 +12:00 |
rogerclarkmelbourne
|
58df3f36b4
|
Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device
|
2015-05-31 16:09:26 +10:00 |
|
rogerclarkmelbourne
|
a1fdae2817
|
Made changes for Nucleo F103RB and Generic STM32F103C . Note this commit only works with these 2 boards, on all others Serial will not compile
|
2015-05-28 17:38:59 +10:00 |
|
rogerclarkmelbourne
|
39b200982a
|
Added generic STM32F103RC support and started work on generic STM32F103R
|
2015-05-28 15:31:06 +10:00 |
|
Roger Clark
|
ffe2f6d043
|
Merge pull request #64 from victorpv/re-script
Fixed ram size in RC board with new bootloader
|
2015-05-28 09:35:48 +10:00 |
|
victorpv
|
15781c492b
|
Ram size corrected.
It was wrongly set to 61KB.
It is actually 48KB for RC, and 64 for RD and RE, but I am using 64KB in
an RCT6 mcu without any issue.
|
2015-05-24 00:30:55 -05:00 |
|
rogerclarkmelbourne
|
7fe2e7806a
|
Disabled generic bootloader USB reset
|
2015-05-24 09:15:43 +10:00 |
|
rogerclarkmelbourne
|
bffbdce50f
|
Temporary fix to Nucleo F103RB to get around missing pin definitions (which should not really be needed), this is temporary fix, I need to sort out the Serial USB code and make a separate define for maple hardware etc
|
2015-05-23 08:05:32 +10:00 |
|
rogerclarkmelbourne
|
6a2e51585d
|
Added DFU upload options for all generic boards. Note, Its not possible to set the correct memort size in the linker file for DFU uploads, so its always set as having the max ram and rom for the series in question. So beware using this if you are maxing out the RAM or Flash (which seems highly unlikely!)
|
2015-05-22 21:07:57 +10:00 |
|
rogerclarkmelbourne
|
cbc78edce3
|
Include VictorPV's usb reset code to all generic board when SERIAL_USB is enabled ( by the defined in boards.txt)
|
2015-05-16 21:54:10 +10:00 |
|
rogerclarkmelbourne
|
e3d460d566
|
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
|
2015-05-13 20:33:30 +10:00 |
|
rogerclarkmelbourne
|
2ab2e5cac7
|
Changed definition for BOARD_HAVE_SERIALUSB so its always true (1) so that compiling in of SERIAL_USB is just controlled by the -DSERIAL_USB flag and not reliant on the DISC pin defintions. Also added experimental code into the ZET to reset USB on startup - this is not fully working, but doesnt seem to cause any ill effects
|
2015-05-13 19:31:23 +10:00 |
|
Roger Clark
|
1df09212c0
|
Updated Nucleo F103RB variant with files from Matthias
|
2015-05-07 12:55:58 +10:00 |
|
Roger Clark
|
bb535029cb
|
updated setup_nvic for maple mini, which seems to have been missed when I made the changed to do with removing VECT_TAB_FLASH
|
2015-05-06 03:09:15 +10:00 |
|
Roger Clark
|
13e27c1dc5
|
Renamed generic_stm32f103rxx and generic_stm32f103zxx to remove th e xx at the end to match changes to boards.txt
|
2015-05-06 03:02:10 +10:00 |
|
rogerclarkmelbourne
|
0631786008
|
Added Maple RET6 board provided by @skyng22003. Tested and compiles OK, but I'm unable to test as I don't have that hardware
|
2015-04-30 12:17:08 +10:00 |
|
rogerclarkmelbourne
|
0d87f72bd8
|
Updated Nucleo_f103rb variant files with new versions from @madias
|
2015-04-28 17:40:11 +10:00 |
|
rogerclarkmelbourne
|
f92904f577
|
Added support for bootloader 2.0 to Maple mini, and added source and binary for maple_mini_boot20.bin to the repo
|
2015-04-25 19:15:48 +10:00 |
|
rogerclarkmelbourne
|
fddefc13a9
|
Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards
|
2015-04-25 15:28:45 +10:00 |
|
rogerclarkmelbourne
|
badf7057f0
|
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
|
2015-04-25 10:41:27 +10:00 |
|
rogerclarkmelbourne
|
4d3c370314
|
added bootloader and non bootloder version of STM32F103RE to STM32F103R series boards
|
2015-04-20 12:26:16 +10:00 |
|
rogerclarkmelbourne
|
6408adc02f
|
Added experimental Maple RET6 board for @skyng22003
|
2015-04-20 10:17:58 +10:00 |
|
rogerclarkmelbourne
|
5ae71423df
|
Fixed typo / bug in USART5
|
2015-04-20 10:10:43 +10:00 |
|
rogerclarkmelbourne
|
7b980c433e
|
Fix for missing UART 4 and 5 from STM32F104RE and STM32F103Z series boards. Note this code has not been fully tested
|
2015-04-20 09:50:33 +10:00 |
|
Roger Clark
|
167320f462
|
Added variants to Generic STM32F103Z and tidied up unused files in the stm32f103zxx variants folder
|
2015-04-16 19:55:11 +10:00 |
|
Roger Clark
|
f92015b9f4
|
Added provisional support for STM32F103Z series. Note this is a work in progress
|
2015-04-15 20:25:00 +10:00 |
|
Roger Clark
|
4e03bac542
|
Fixed issue with incorrect USART RX Pin number, added PB2 as this pin can be used with caution (as its shared with Boot1)
|
2015-04-15 10:05:55 +10:00 |
|
Roger Clark
|
347cee0d4e
|
added comment to generic stm32f103c board.h
|
2015-04-15 09:40:54 +10:00 |
|
Roger Clark
|
e8aa9b0620
|
Changed generic stm32f103c board definitions to tidy up the order of the PIN MAP
|
2015-04-15 09:21:35 +10:00 |
|
Roger Clark
|
6fec429e99
|
Made new generic STM32F103C board variant based on Maple mini. This is a work in process. It seems to work, but needs more tidying up ;-)
|
2015-04-14 20:18:37 +10:00 |
|
Roger Clark
|
fedb642aa1
|
Updated 'Maple mini generic' board type - fixed issue with c8 boards, removed non working gcc compilor menu and removed non working debug options menu. Renamed boards to 'STM32 boards' etc
|
2015-04-10 17:09:07 +10:00 |
|
Roger Clark
|
456f38a726
|
Work in progress- Added folder for STM32F103Z series
|
2015-03-21 04:58:01 +11:00 |
|
Roger Clark
|
cd7b0badcf
|
Fixed issue of missing port pins in board.cpp
|
2015-03-12 07:19:33 +11:00 |
|
Roger Clark
|
61ef2bca74
|
Started work on new variants and fixed a few other minor issues
|
2015-03-04 08:27:47 +11:00 |
|
Roger Clark
|
5f83c13285
|
renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4
|
2015-02-24 20:13:04 +11:00 |