9 Commits

Author	SHA1	Message	Date
Roger Clark	88d2457f30	STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz	2015-09-06 07:51:40 +10:00
victorpv	7564830669	Edits to move pinmap to flash ... Initial comit, not tested, but copied from previous working folder.	2015-08-25 00:02:57 -05:00
rogerclarkmelbourne	58df3f36b4	Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device	2015-05-31 16:09:26 +10:00
Roger Clark	bb535029cb	updated setup_nvic for maple mini, which seems to have been missed when I made the changed to do with removing VECT_TAB_FLASH	2015-05-06 03:09:15 +10:00
rogerclarkmelbourne	f92904f577	Added support for bootloader 2.0 to Maple mini, and added source and binary for maple_mini_boot20.bin to the repo	2015-04-25 19:15:48 +10:00
rogerclarkmelbourne	fddefc13a9	Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards	2015-04-25 15:28:45 +10:00
rogerclarkmelbourne	badf7057f0	Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board	2015-04-25 10:41:27 +10:00
Roger Clark	fedb642aa1	Updated 'Maple mini generic' board type - fixed issue with c8 boards, removed non working gcc compilor menu and removed non working debug options menu. Renamed boards to 'STM32 boards' etc	2015-04-10 17:09:07 +10:00
Roger Clark	5f83c13285	renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4	2015-02-24 20:13:04 +11:00