6 Commits

Author	SHA1	Message	Date
stevstrong	17cbf256d1	corrected defines needed when parity is used ... When the parity control is enabled, the computed parity is inserted at the MSB position (9th bit if M=1; 8th bit if M=0) and parity is checked on the received data. This excludes 9 bit long words + parity bit.	2015-11-19 11:50:13 +01:00
rogerclarkmelbourne	a1fdae2817	Made changes for Nucleo F103RB and Generic STM32F103C . Note this commit only works with these 2 boards, on all others Serial will not compile	2015-05-28 17:38:59 +10:00
rogerclarkmelbourne	fddefc13a9	Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards	2015-04-25 15:28:45 +10:00
Roger Clark	f21592574f	Added serial config parameter support to HardwareSerial :: begin(), so that word length (of 8 or 9 bits), parity (None, Even or Odd) and 1 or 2 stop bits can now be set. Note the STM32 doesnt support all the word lengths supprted by AVR or SAM e.g. the hardware doesnt support 5,6 or 7 bit word lengths.	2015-03-04 22:59:11 +11:00
Roger Clark	244674ca81	Added dummy parameter to HardwareSerial begin() for device config. This is a work in progress, the config value is not used to control the hardware yet	2015-03-04 10:02:44 +11:00
Roger Clark	5f83c13285	renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4	2015-02-24 20:13:04 +11:00