cb901b4e4f
Added CPU Speed menu to all boards except Nucleo RB, with additional entry for 128Mhz Turbo - NO USB. Note only tested on the Blue Pill
2017-07-30 17:43:40 +10:00
f2c2323afd
Changed board variants to use calculate value from F_CPU for CYCLES_PER_MICROSECOND
2017-05-26 16:22:16 +10:00
c3d9d1bc1e
Added define for LED_BUILTIN to Maple mini and generic STM32F103C (on PC13 to suit the BluePill)
2017-05-25 18:16:47 +10:00
7dcbbc85b0
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
2017-01-09 20:27:07 +11:00
2e54594f46
Added #define LED_BUILTIN to Maple mini and generic_STM32F103C
2016-12-02 21:24:13 +11:00
073aa23ed2
Merge remote-tracking branch 'refs/remotes/rogerclarkmelbourne/master'
2016-10-16 23:02:16 +02:00
9147a461e7
Merge branch 'master' of https://github.com/bubulindo/Arduino_STM32 into bubulindo-master
2016-09-26 10:42:42 +10:00
5c13d8b0d4
Addition of a better way to deal with the Onboard ADC.
...
This modification adds support for a STM32ADC library. There are a
couple of examples on how to use it. The library allows usage of the
ADC with DMA in circular mode or scan mode, it allows the ADC to be
used in scan mode. And also to use the EOC interrupt.
More functionality needs to be added and will be in time.
Eventually the util files will be moved into the adc files in the core.
2016-09-23 16:35:18 +01:00
0909f4c20d
Changed defines for MOSI, MISO etc into const static vars, to address compatibility issues
2016-05-03 20:23:51 +10:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
7564830669
Edits to move pinmap to flash
...
Initial comit, not tested, but copied from previous working folder.
2015-08-25 00:02:57 -05:00
58df3f36b4
Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device
2015-05-31 16:09:26 +10:00
bb535029cb
updated setup_nvic for maple mini, which seems to have been missed when I made the changed to do with removing VECT_TAB_FLASH
2015-05-06 03:09:15 +10:00
f92904f577
Added support for bootloader 2.0 to Maple mini, and added source and binary for maple_mini_boot20.bin to the repo
2015-04-25 19:15:48 +10:00
fddefc13a9
Separated USB Serial functionality definitions from the BOOTLOADER_maple definition, so that generic boards can use USB serial without needing to have the bootloader and the disconnect hardware. NOTE. I have only tested the SERIAL_USB on the F103ZE board, it may not work on other generic boards
2015-04-25 15:28:45 +10:00
badf7057f0
Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board
2015-04-25 10:41:27 +10:00
fedb642aa1
Updated 'Maple mini generic' board type - fixed issue with c8 boards, removed non working gcc compilor menu and removed non working debug options menu. Renamed boards to 'STM32 boards' etc
2015-04-10 17:09:07 +10:00
5f83c13285
renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4
2015-02-24 20:13:04 +11:00
Roger Clark
stevstrong
Bubulindo
victorpv
rogerclarkmelbourne