7dcbbc85b0
Fix bug USB divider for 48Mhz operation. Also added support for 48Mhz to Maple mini and Generic F103C (Note. There is a bug in tone() at 48Mhz)
2017-01-09 20:27:07 +11:00
9147a461e7
Merge branch 'master' of https://github.com/bubulindo/Arduino_STM32 into bubulindo-master
2016-09-26 10:42:42 +10:00
0b34af3b6a
Minor bug fixes now that I have a ZET6
...
While using a different board, I realized that I did not configure the
ADC on all variants and there is a minor bug on the irq_num for
advanced 103 devices.
2016-09-25 13:14:12 +01:00
896cb2d3c7
Increase generic boards USB reset delay to fix issue with newer PC's
2016-05-15 15:16:27 +10:00
0909f4c20d
Changed defines for MOSI, MISO etc into const static vars, to address compatibility issues
2016-05-03 20:23:51 +10:00
88d2457f30
STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz
2015-09-06 07:51:40 +10:00
6b6ab7dab5
Implemented PIN MAP in flash for all other variants
2015-09-01 19:58:39 +10:00
207986431d
Added STM32F103R8 / RB variant folder supplied by @ahull. Also made minor change to the stm32f103r folder bootloader link file name, so that the same file name could be used in the existing stm32f103r folder and the new folder (but they have different contents)
2015-08-10 20:27:09 +10:00
58df3f36b4
Changed all remaining boards to have HW serial definitions in board.cpp so that every board can configure which Arduino Serial instance maps to which hardware serial device
2015-05-31 16:09:26 +10:00
39b200982a
Added generic STM32F103RC support and started work on generic STM32F103R
2015-05-28 15:31:06 +10:00
ffe2f6d043
Merge pull request #64 from victorpv/re-script
...
Fixed ram size in RC board with new bootloader
2015-05-28 09:35:48 +10:00
15781c492b
Ram size corrected.
...
It was wrongly set to 61KB.
It is actually 48KB for RC, and 64 for RD and RE, but I am using 64KB in
an RCT6 mcu without any issue.
2015-05-24 00:30:55 -05:00
7fe2e7806a
Disabled generic bootloader USB reset
2015-05-24 09:15:43 +10:00
6a2e51585d
Added DFU upload options for all generic boards. Note, Its not possible to set the correct memort size in the linker file for DFU uploads, so its always set as having the max ram and rom for the series in question. So beware using this if you are maxing out the RAM or Flash (which seems highly unlikely!)
2015-05-22 21:07:57 +10:00
cbc78edce3
Include VictorPV's usb reset code to all generic board when SERIAL_USB is enabled ( by the defined in boards.txt)
2015-05-16 21:54:10 +10:00
e3d460d566
Added STM32F103V series boards from files supplied by VictorPV (after updating to latest changes to -DSERIAL_USB etc) , also added victors experimental USB reset code - which partially works !
2015-05-13 20:33:30 +10:00
13e27c1dc5
Renamed generic_stm32f103rxx and generic_stm32f103zxx to remove th e xx at the end to match changes to boards.txt
2015-05-06 03:02:10 +10:00
Roger Clark
Bubulindo
rogerclarkmelbourne
victorpv