/*************************************************** This is our GFX example for the Adafruit ILI9341 Breakout and Shield ----> http://www.adafruit.com/products/1651 Check out the links above for our tutorials and wiring diagrams These displays use SPI to communicate, 4 or 5 pins are required to interface (RST is optional) Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit! Written by Limor Fried/Ladyada for Adafruit Industries. MIT license, all text above must be included in any redistribution ****************************************************/ #include #include #include #include #include #include "fonts\Arial_bold_14.h" #define TFT_DC 10 #define TFT_CS 8 #define TFT_RST 9 // Use hardware SPI (on Uno, #13, #12, #11) and the above for CS/DC ILI9341_due tft = ILI9341_due(TFT_CS, TFT_DC, TFT_RST); ILI9341_due_gText t1(&tft); long Screenfill, Text, Lines, HorizVertLines, Rectanglesoutline, Rectanglesfilled, Circlesfilled, Circlesoutline, Trianglesoutline, Trianglesfilled, Roundedrectsoutline, Roundedrectsfilled; void setup() { Serial.begin(9600); while (!Serial) ; // wait for Arduino Serial Monitor Serial.println("ILI9341 Test!"); tft.begin(); tft.setRotation(iliRotation270); tft.fillScreen(ILI9341_BLUE); t1.defineArea(30, 30, 26, 12, Arial_bold_14); t1.selectFont(Arial_bold_14); t1.setFontLetterSpacing(2); t1.setFontColor(ILI9341_WHITE, ILI9341_BLUE); #if SPI_MODE_NORMAL char mode[] = "SPI_MODE_NORMAL"; #elif SPI_MODE_EXTENDED char mode[] = "SPI_MODE_EXTENDED"; #elif SPI_MODE_DMA char mode[] = "SPI_MODE_DMA"; #endif t1.drawString(mode, tft.width()/2 - t1.stringWidth(mode) / 2 - 30, 80); delay(3000); tft.setRotation(iliRotation0); // read diagnostics (optional but can help debug problems) uint8_t x = tft.readcommand8(ILI9341_RDMODE); Serial.print("Display Power Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDMADCTL); Serial.print("MADCTL Mode: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDPIXFMT); Serial.print("Pixel Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDIMGFMT); Serial.print("Image Format: 0x"); Serial.println(x, HEX); x = tft.readcommand8(ILI9341_RDSELFDIAG); Serial.print("Self Diagnostic: 0x"); Serial.println(x, HEX); Serial.println(F("Benchmark Time (microseconds)")); Serial.print(F("Screen fill ")); unsigned long start = micros(); Serial.println(Screenfill = testFillScreen()); // delay(200); Serial.print(F("Text ")); Serial.println(Text = testText()); // delay(200); Serial.print(F("Lines ")); Serial.println(Lines = testLines(ILI9341_CYAN)); // delay(200); Serial.print(F("Horiz/Vert Lines ")); Serial.println(HorizVertLines = testFastLines(ILI9341_RED, ILI9341_BLUE)); // delay(200); Serial.print(F("Rectangles (outline) ")); Serial.println(Rectanglesoutline = testRects(ILI9341_GREEN)); // delay(200); Serial.print(F("Rectangles (filled) ")); Serial.println(Rectanglesfilled = testFilledRects(ILI9341_YELLOW, ILI9341_MAGENTA)); // delay(200); Serial.print(F("Circles (filled) ")); Serial.println(Circlesfilled = testFilledCircles(10, ILI9341_MAGENTA)); Serial.print(F("Circles (outline) ")); Serial.println(Circlesoutline = testCircles(10, ILI9341_WHITE)); // delay(200); Serial.print(F("Triangles (outline) ")); Serial.println(Trianglesoutline = testTriangles()); // delay(200); Serial.print(F("Triangles (filled) ")); Serial.println(Trianglesfilled = testFilledTriangles()); // delay(200); Serial.print(F("Rounded rects (outline) ")); Serial.println(Roundedrectsoutline = testRoundRects()); // delay(200); Serial.print(F("Rounded rects (filled) ")); Serial.println(Roundedrectsfilled = testFilledRoundRects()); // delay(200); Serial.println(F("Done!")); tft.fillScreen(ILI9341_BLUE); tft.setRotation(iliRotation270); t1.cursorToXY(45, 80); t1.print("Total time: "); t1.print((micros() - start)/1000); t1.print(" ms"); delay(2000); printStats(); } void printStats() { tft.setRotation(iliRotation270); tft.fillScreen(ILI9341_BLUE); t1.cursorTo(0, 0); t1.print("Screen fill "); t1.cursorTo(18); t1.print(Screenfill); t1.cursorTo(0, 1); t1.print("Text "); t1.cursorTo(18); t1.print(Text); t1.cursorTo(0, 2); t1.print("Lines "); t1.cursorTo(18); t1.print(Lines); t1.cursorTo(0, 3); t1.print("Horiz/Vert Lines "); t1.cursorTo(18); t1.print(HorizVertLines); t1.cursorTo(0, 4); t1.print("Rectangles (outline) "); t1.cursorTo(18); t1.print(Rectanglesoutline); t1.cursorTo(0, 5); t1.print("Rectangles (filled) "); t1.cursorTo(18); t1.print(Rectanglesfilled); t1.cursorTo(0, 6); t1.print("Circles (filled) "); t1.cursorTo(18); t1.print(Circlesfilled); t1.cursorTo(0, 7); t1.print("Circles (outline) "); t1.cursorTo(18); t1.print(Circlesoutline); t1.cursorTo(0, 8); t1.print("Triangles (outline) "); t1.cursorTo(18); t1.print(Trianglesoutline); t1.cursorTo(0, 9); t1.print("Triangles (filled) "); t1.cursorTo(18); t1.print(Trianglesfilled); t1.cursorTo(0, 10); t1.print("Rounded rects (outline) "); t1.cursorTo(18); t1.print(Roundedrectsoutline); t1.cursorTo(0, 11); t1.print("Rounded rects (filled) "); t1.cursorTo(18); t1.print(Roundedrectsfilled); } void loop(void) { /*for(uint8_t rotation=0; rotation<4; rotation++) { tft.setRotation(rotation); testText(); delay(1000); }*/ } unsigned long testFillScreen() { unsigned long start = micros(); tft.fillScreen(ILI9341_BLACK); tft.fillScreen(ILI9341_RED); tft.fillScreen(ILI9341_GREEN); tft.fillScreen(ILI9341_BLUE); tft.fillScreen(ILI9341_BLACK); return micros() - start; } unsigned long testText() { tft.fillScreen(ILI9341_BLACK); unsigned long start = micros(); tft.setCursor(0, 0); tft.setTextColor(ILI9341_WHITE); tft.setTextSize(1); tft.println("Hello World!"); tft.setTextColor(ILI9341_YELLOW); tft.setTextSize(2); tft.println(1234.56); tft.setTextColor(ILI9341_RED); tft.setTextSize(3); tft.println(0xDEADBEEF, HEX); tft.println(); tft.setTextColor(ILI9341_GREEN); tft.setTextSize(5); tft.println("Groop"); tft.setTextSize(2); tft.println("I implore thee,"); tft.setTextSize(1); tft.println("my foonting turlingdromes."); tft.println("And hooptiously drangle me"); tft.println("with crinkly bindlewurdles,"); tft.println("Or I will rend thee"); tft.println("in the gobberwarts"); tft.println("with my blurglecruncheon,"); tft.println("see if I don't!"); return micros() - start; } unsigned long testLines(uint16_t color) { unsigned long start, t; int x1, y1, x2, y2, w = tft.width(), h = tft.height(); tft.fillScreen(ILI9341_BLACK); x1 = y1 = 0; y2 = h - 1; start = micros(); for(x2=0; x20; i-=6) { i2 = i / 2; start = micros(); tft.fillRect(cx-i2, cy-i2, i, i, color1); t += micros() - start; // Outlines are not included in timing results tft.drawRect(cx-i2, cy-i2, i, i, color2); } return t; } unsigned long testFilledCircles(uint8_t radius, uint16_t color) { unsigned long start; int x, y, w = tft.width(), h = tft.height(), r2 = radius * 2; tft.fillScreen(ILI9341_BLACK); start = micros(); for(x=radius; x10; i-=5) { start = micros(); tft.fillTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, tft.color565(0, i, i)); t += micros() - start; tft.drawTriangle(cx, cy - i, cx - i, cy + i, cx + i, cy + i, tft.color565(i, i, 0)); } return t; } unsigned long testRoundRects() { unsigned long start; int w, i, i2, cx = tft.width() / 2 - 1, cy = tft.height() / 2 - 1; tft.fillScreen(ILI9341_BLACK); w = min(tft.width(), tft.height()); start = micros(); for(i=0; i20; i-=6) { i2 = i / 2; tft.fillRoundRect(cx-i2, cy-i2, i, i, i/8, tft.color565(0, i, 0)); } return micros() - start; }