Arduino_STM32/STM32F1/libraries/Serasidis_EtherCard_STM/examples/pings/pings.ino

96 lines
2.6 KiB
C++

// Ping a remote server, also uses DHCP and DNS.
// 2011-06-12 <jc@wippler.nl> http://opensource.org/licenses/mit-license.php
//
//-----------------------------------------------------------------
// Ported to STM32F103 by Vassilis Serasidis on 21 May 2015
// Home: http://www.serasidis.gr
// email: avrsite@yahoo.gr
//
// PIN Connections (Using STM32F103):
//
// ENC28J60 - STM32F103
// VCC - 3.3V
// GND - GND
// SCK - Pin PA5
// SO - Pin PA6
// SI - Pin PA7
// CS - Pin PA8
//-----------------------------------------------------------------
//
//
#include <SPI.h>
#include <EtherCard_STM.h>
// ethernet interface mac address, must be unique on the LAN
static byte mymac[] = { 0x74,0x69,0x69,0x2D,0x30,0x31 };
byte Ethernet::buffer[700];
static uint32_t timer;
static byte myip[] = { 192,168,1,203 };
// gateway ip address
static byte gwip[] = { 192,168,1,1 };
// domain name server (dns) address
static byte dnsip[] = { 192,168,1,1 };
// called when a ping comes in (replies to it are automatic)
static void gotPinged (byte* ptr) {
ether.printIp(">>> ping from: ", ptr);
}
void setup () {
Serial.begin(57600);
delay(10);
Serial.println("\n[pings]");
if (ether.begin(sizeof Ethernet::buffer, mymac) == 0)
Serial.println(("Failed to access Ethernet controller"));
if (!ether.dhcpSetup()){//If DHCP fails set the static IP, Gateway and DNS IP.
Serial.println(F("DHCP failed"));
ether.staticSetup(myip, gwip);
ether.copyIp(ether.dnsip, dnsip);
}
ether.printIp("IP: ", ether.myip);
ether.printIp("GW: ", ether.gwip);
//#if 1
// use DNS to locate the IP address we want to ping
if (!ether.dnsLookup(PSTR("www.google.com")))
Serial.println("DNS failed");
//#else
//ether.parseIp(ether.hisip, "173.194.112.119");
//#endif
ether.printIp("SRV: ", ether.hisip);
// call this to report others pinging us
ether.registerPingCallback(gotPinged);
timer = -9999999; // start timing out right away
Serial.println();
}
void loop () {
word len = ether.packetReceive(); // go receive new packets
word pos = ether.packetLoop(len); // respond to incoming pings
// report whenever a reply to our outgoing ping comes back
if (len > 0 && ether.packetLoopIcmpCheckReply(ether.hisip)) {
Serial.print(" ");
Serial.print((micros() - timer) * 0.001, 3);
Serial.println(" ms");
}
// ping a remote server once every few seconds
if (micros() - timer >= 5000000) {
ether.printIp("Pinging: ", ether.hisip);
timer = micros();
ether.clientIcmpRequest(ether.hisip);
}
}