36 lines
1.2 KiB
C++
36 lines
1.2 KiB
C++
/*
|
|
BlinkNcount for Maple Mini by m. ray burnette
|
|
Sketch uses 13,808 bytes (12%) of program storage space. Maximum is 108,000 bytes.
|
|
Global variables use 2,592 bytes of dynamic memory.
|
|
Turns on an LED on for one second, then off for one second, repeatedly.
|
|
Counts and displays the count on the attached serial monitor
|
|
This example code is in the public domain.
|
|
*/
|
|
int n = 0;
|
|
|
|
|
|
void setup() {
|
|
// initialize the digital pin as an output.
|
|
pinMode(33, OUTPUT);
|
|
// Initialize virtual COM over USB on Maple Mini
|
|
Serial.begin(9600); // BAUD has no effect on USB serial: placeholder for physical UART
|
|
// wait for serial monitor to be connected.
|
|
while (!(Serial.isConnected() && (Serial.getDTR() || Serial.getRTS())))
|
|
{
|
|
digitalWrite(33,!digitalRead(33));// Turn the LED from off to on, or on to off
|
|
delay(100); // fast blink
|
|
}
|
|
Serial.println("Blink LED & count Demo");
|
|
}
|
|
|
|
void loop() {
|
|
digitalWrite(33, HIGH); // set the LED on
|
|
delay(500); // wait for a second
|
|
digitalWrite(33, LOW); // set the LED off
|
|
Serial.print("Loop #: ");
|
|
n++;
|
|
Serial.println(n);
|
|
|
|
delay(500); // wait
|
|
}
|