117 lines
3.1 KiB
C++
117 lines
3.1 KiB
C++
/*
|
|
Web client
|
|
|
|
This sketch connects to a website (http://www.google.com)
|
|
using an Arduino Wiznet Ethernet shield.
|
|
|
|
Circuit:
|
|
* Ethernet shield attached to pins 10, 11, 12, 13
|
|
|
|
created 18 Dec 2009
|
|
by David A. Mellis
|
|
modified 9 Apr 2012
|
|
by Tom Igoe, based on work by Adrian McEwen
|
|
modified 12 Aug 2013
|
|
by Soohwan Kim
|
|
Modified 18 Aug 2015
|
|
by Vassilis Serasidis
|
|
|
|
=========================================================
|
|
Ported to STM32F103 on 18 Aug 2015 by Vassilis Serasidis
|
|
|
|
<---- Pinout ---->
|
|
W5x00 <--> STM32F103
|
|
SS <--> PA4 <--> BOARD_SPI1_NSS_PIN
|
|
SCK <--> PA5 <--> BOARD_SPI1_SCK_PIN
|
|
MISO <--> PA6 <--> BOARD_SPI1_MISO_PIN
|
|
MOSI <--> PA7 <--> BOARD_SPI1_MOSI_PIN
|
|
=========================================================
|
|
|
|
|
|
*/
|
|
|
|
#include <SPI.h>
|
|
#include <Ethernet_STM.h>
|
|
|
|
// Enter a MAC address for your controller below.
|
|
// Newer Ethernet shields have a MAC address printed on a sticker on the shield
|
|
#if defined(WIZ550io_WITH_MACADDRESS) // Use assigned MAC address of WIZ550io
|
|
;
|
|
#else
|
|
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
|
|
#endif
|
|
// if you don't want to use DNS (and reduce your sketch size)
|
|
// use the numeric IP instead of the name for the server:
|
|
//IPAddress server(185,25,21,130); // numeric IP for Serasidis.gr (no DNS)
|
|
char server[] = "www.serasidis.gr"; // name address for Serasidis.gr (using DNS)
|
|
|
|
// Set the static IP address to use if the DHCP fails to assign
|
|
IPAddress ip(192,168,1,177);
|
|
|
|
// Initialize the Ethernet client library
|
|
// with the IP address and port of the server
|
|
// that you want to connect to (port 80 is default for HTTP):
|
|
EthernetClient client;
|
|
|
|
void setup() {
|
|
// Open serial communications and wait for port to open:
|
|
Serial.begin(9600);
|
|
while (!Serial) {
|
|
; // wait for serial port to connect. Needed for Leonardo only
|
|
}
|
|
|
|
// start the Ethernet connection:
|
|
#if defined(WIZ550io_WITH_MACADDRESS)
|
|
if (Ethernet.begin() == 0) {
|
|
#else
|
|
if (Ethernet.begin(mac) == 0) {
|
|
#endif
|
|
Serial.println("Failed to configure Ethernet using DHCP");
|
|
// no point in carrying on, so do nothing forevermore:
|
|
// try to congifure using IP address instead of DHCP:
|
|
#if defined(WIZ550io_WITH_MACADDRESS)
|
|
Ethernet.begin(ip);
|
|
#else
|
|
Ethernet.begin(mac, ip);
|
|
#endif
|
|
}
|
|
// give the Ethernet shield a second to initialize:
|
|
delay(1000);
|
|
Serial.println("connecting...");
|
|
|
|
// if you get a connection, report back via serial:
|
|
if (client.connect(server, 80)) {
|
|
Serial.println("connected");
|
|
// Make an HTTP request:
|
|
client.println("GET /util/time.php HTTP/1.1");
|
|
client.println("Host: www.serasidis.gr");
|
|
client.println("Connection: close");
|
|
client.println();
|
|
}
|
|
else {
|
|
// if you didn't get a connection to the server:
|
|
Serial.println("connection failed");
|
|
}
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
// if there are incoming bytes available
|
|
// from the server, read them and print them:
|
|
if (client.available()) {
|
|
char c = client.read();
|
|
Serial.print(c);
|
|
}
|
|
|
|
// if the server's disconnected, stop the client:
|
|
if (!client.connected()) {
|
|
Serial.println();
|
|
Serial.println("disconnecting.");
|
|
client.stop();
|
|
|
|
// do nothing forevermore:
|
|
while(true);
|
|
}
|
|
}
|
|
|