History

Roger Clark 76157ad751 Updated 'category' in library.properties files, to shop the IDE complaining that this key is missing		2016-05-03 20:44:18 +10:00
..
examples	ENC28J60 Ethernet library for STM32.	2015-05-28 16:33:15 +03:00
src	ENC28J60 Ethernet library for STM32.	2015-05-28 16:48:02 +03:00
README.md	ENC28J60 Ethernet library for STM32.	2015-05-28 16:41:18 +03:00
keywords.txt	Keywords of the library	2015-05-28 16:26:41 +03:00
library.properties	Updated 'category' in library.properties files, to shop the IDE complaining that this key is missing	2016-05-03 20:44:18 +10:00

README.md

EtherCard

EtherCard is a driver for the ENC28J60 chip, compatible with Arduino IDE 1.6.3 (or later).
Adapted and extended from code written by Guido Socher and Pascal Stang.

License: GPL2

The documentation for this library is at http://jeelabs.net/pub/docs/ethercard/.

Physical Installation

PIN Connections (Using STM32F103):

ENC28J60	STM32F103
Vcc	3.3V
SCK	PA5
SO	PA6
SI	PA7
CS	PA8
RST	3.3V

The CS pin is selectable with the ether.begin() function.

e.g. If you want to use the PA9 as CS pin then you can initiallize the ethernet module inside the sketch as:

if (ether.begin(sizeof Ethernet::buffer, mymac) == 0,PA9)

By default the pin PA8 is used as CS (you don't have to initiallize it).

Credits

The EtherCard library was written by Jean-Claude Wippler and ported to STM32F103 by Vassilis Serasidis

Support

That library works perfect on Arduino IDE 1.6.3 (or later) with Arduino_STM32 project installed.

The Arduino STM32 project has a forum (STM32duino) also for getting or for providing help to people that are interested in that project .