Roger Clark 88d2457f30 STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz		2015-09-06 07:51:40 +10:00
..
board	Removed BOARD_LED_PIN and button pin definitions as they are not core Arduino API definitions and they were causing confusion on users of generic stm32 boards which don't all have an LED and even if they have an LED, the pin it is on is not always on the same pin depending on the model of generic board	2015-04-25 10:41:27 +10:00
ld	Added experimental Maple RET6 board for @skyng22003	2015-04-20 10:17:58 +10:00
wirish	STM32F1 core: Implemented changes already made to the GD32F1 core to use F_CPU instead of hard coded values for 72000000 and (F_CPU -1) instead of 71999999 and to replace other hard coded values related to the clock freqency. Also updated the code so that the USB clock was disabled in setup_clock_prescalers to allow it to be changed in that function during initialisation, in case altermative prescaler values for USB are required, e.g. for operation at 48Mhz	2015-09-06 07:51:40 +10:00
board.cpp	Implemented PIN MAP in flash for all other variants	2015-09-01 19:58:39 +10:00
pins_arduino.h	Started work on new variants and fixed a few other minor issues	2015-03-04 08:27:47 +11:00
variant.h	renamed top level folder STM32F1XX to STM32F1 to correspond to other top level folder names e.g. STM32F3 and STM32F4	2015-02-24 20:13:04 +11:00