20 lines
671 B
Markdown
20 lines
671 B
Markdown
|
# Self tesing boards
|
||
|
|
|
||
|
|
To automatically check if the board works, there are tests in the library.
|
||
|
|
These work by connecting pins to
|
||
|
|
|
||
|
|
## Generic STM32 Arduino API test
|
||
|
|
|
||
|
|
This test should work on almost all STM32 boards.
|
||
|
|
|
||
|
|
1. From the arduino menu, select File/Examples/Examples for XXX/SelfTest
|
||
|
|
2. Connect PA0 to PA1 to test digital/analog/read/write/interrupt
|
||
|
|
3. Connect SPI MOSI to SPI MISO to test SPI
|
||
|
|
4. Select a free UART (not used for Serial) on the board, connect the RX to TX, set the SerialUartToTest macro in the sketch
|
||
|
|
5. Run the sketch
|
||
|
|
|
||
|
|
The result should be short blink on the board LED.
|
||
|
|
If there was a failure, it is shown as a long LED
|
||
|
|
|
||
|
|
The results are also
|