* CAN WBO Support
* fix typo
* Change data handling
* add source repo information
* Added heater functionality and fixed value handling
* Missed 0
* Better condition handling and minor fixes to multiplication
* Remove code duplication
* fix
* Error fixing and correct address of controller for outgoing frames
* Page layout adjustment
* fix
* Second WBO added to be used in TS / MLV
* Add extended flag to out frame
* Functional test and fixes
* typo
* CAN WBO Support
fix typo
Change data handling
add source repo information
Added heater functionality and fixed value handling
Missed 0
Better condition handling and minor fixes to multiplication
Remove code duplication
fix
Error fixing and correct address of controller for outgoing frames
Page layout adjustment
fix
Second WBO added to be used in TS / MLV
Add extended flag to out frame
Add support for BlitzBox hardware in speeduino firmware (#1148)
* Add support for BlitzBox in init.cpp
added case 42 for BlitzBox support
* Added support for Blitzbox to speeduino.ini
Added support for Blitzbox to speeduino.ini to get an ECU entry in Tunerstudio
* Enabled spare pins in pin layout
Functional test and fixes
typo
Fix issue with LED indicator not working when MC33810 was in use
Resolve issue with Teensy not sending CAN msgs
Fix regression on MC33810 units from af2815d818
Added check for AFR greater than 25.5
Added overflow check of O2 value
Code clean up
Bump actions/upload-artifact from 3 to 4 (#1149)
Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 3 to 4.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](https://github.com/actions/upload-artifact/compare/v3...v4)
---
updated-dependencies:
- dependency-name: actions/upload-artifact
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Spelling and typo correction
missing space
* Fix possible overflow
* Allow for future CAN based WBO modules to be added
* rusEFI case as requested.
* fix
* CAN WBO Support
* fix typo
* Change data handling
* add source repo information
* Added heater functionality and fixed value handling
* Missed 0
* Better condition handling and minor fixes to multiplication
* Remove code duplication
* fix
* Error fixing and correct address of controller for outgoing frames
* Page layout adjustment
* fix
* Second WBO added to be used in TS / MLV
* Add extended flag to out frame
* Functional test and fixes
* typo
* Allow for future CAN based WBO modules to be added
* CAN WBO Support
fix typo
Change data handling
add source repo information
Added heater functionality and fixed value handling
Missed 0
Better condition handling and minor fixes to multiplication
Remove code duplication
fix
Error fixing and correct address of controller for outgoing frames
Page layout adjustment
fix
Second WBO added to be used in TS / MLV
Add extended flag to out frame
Add support for BlitzBox hardware in speeduino firmware (#1148)
* Add support for BlitzBox in init.cpp
added case 42 for BlitzBox support
* Added support for Blitzbox to speeduino.ini
Added support for Blitzbox to speeduino.ini to get an ECU entry in Tunerstudio
* Enabled spare pins in pin layout
Functional test and fixes
typo
Fix issue with LED indicator not working when MC33810 was in use
Resolve issue with Teensy not sending CAN msgs
Fix regression on MC33810 units from af2815d818
Added check for AFR greater than 25.5
Added overflow check of O2 value
Code clean up
Bump actions/upload-artifact from 3 to 4 (#1149)
Bumps [actions/upload-artifact](https://github.com/actions/upload-artifact) from 3 to 4.
- [Release notes](https://github.com/actions/upload-artifact/releases)
- [Commits](https://github.com/actions/upload-artifact/compare/v3...v4)
---
updated-dependencies:
- dependency-name: actions/upload-artifact
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Spelling and typo correction
missing space
* rusEFI case as requested.
* Revert "Merge branch 'master' of https://github.com/dynfer/speeduino"
This reverts commit 49dc0eab0814cd9e55435178ab0cbb74741b473a, reversing
changes made to 56abc790086ba1b5f0d2efdbc7947c60c6b34f9a.
* fix merge
* fixes
* Added overflow prevention
* Final
---------
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Moved WMI to VVT2
WMI to VVT2 channel and increased PWM resolution to 0.5%
* Enable WMI and VVT at the same time
* Move MWI to VVT2 options on INI file
* Rename auxiliaries.ino to auxiliaries.cpp
* Rename updates.ino to updates.cpp
---------
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Added taper for DFCO for ignition and fuel
Used 1 byte of RAM and 4 on page 9
* Moved data to be compatible with DFCO map thres
* Added taper for DFCO for ignition and fuel
Used 1 byte of RAM and 4 on page 9
* Moved data to be compatible with DFCO map thres
* Fixed potential overflow and DFCO tests
* Moved math into functions and added tests
---------
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Map Limits for EGO
* Better update value for not breaking old tunes
my guess is that 300 kpa max will be good for not disabling EGO when using boost now but you can change for what value you think is the best
* Atualizar o updates.cpp
fix my dumbo mistake
* Prevent signed vs unsigned warning
---------
Co-authored-by: Josh Stewart <josh@noisymime.org>
Josh Stewart
Daniel Tobias
dynfer
Vitor Moreno B. Sales
tx_haggis
155ac