Josh Stewart
65415c0aff
Correct issue where injector timing was forced to simultaneous on 6 and 8 cylinders
2017-05-26 11:06:20 +10:00
Josh Stewart
fbde19253f
Clear cranking and WUE bits when engine speed drops to 0rpm
2017-05-16 22:01:33 +10:00
Josh Stewart
f27f883a5c
Add updater mechanism for translating data between firmware versions
2017-05-16 15:05:39 +10:00
Josh Stewart
7b13b8995c
Prevent the IAT retard curve from clobbering spark advance values below 0
2017-05-10 15:46:14 +10:00
Josh Stewart
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
Josh Stewart
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
darren siepka
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
Josh Stewart
7c909f021e
Set appropriate type for fixed cranking additional dwell
2017-05-04 13:47:50 +10:00
Josh Stewart
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
Vitor Moreno B. Sales
fc577c9a59
Updated STM work
2017-04-21 11:30:13 -03:00
Josh Stewart
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
darren siepka
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
Josh Stewart
676a001fb8
Initial commit of Subaru 6/7 (Likely has bugs)
2017-03-31 22:39:33 +11:00
Josh Stewart
3820fa8201
Some Teensy compatibility improvements
2017-03-29 14:03:38 +11:00
Josh Stewart
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
Josh Stewart
eb334b5a1c
Cleanup of variable names and Enable check
2017-03-15 23:19:08 +11:00
Josh Stewart
afb6f71aae
Complete closed loop stepper idle (Needs testing)
2017-03-14 17:25:59 +11:00
darren siepka
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
Josh Stewart
22af95db32
Seemingly working Nissan 360 decoder (4 and 6 cylinder)
2017-03-01 16:17:30 +11:00
Josh Stewart
0ae02e23f1
Minor cleanups or warnings and error (from last commit)
2017-02-14 01:07:05 +11:00
Josh Stewart
650a096175
Initial (untested) commit of Nissan 360. ONLY support 4 cylinder so far
2017-02-12 18:35:18 +13:00
Josh Stewart
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
Josh Stewart
bec06bca3a
Improve calculation speed of boost control
2017-02-11 22:33:07 +13:00
Josh Stewart
4ca8205591
More MAP sanity settings
2017-02-09 14:22:57 +11:00
Josh Stewart
c555bbc060
Move to PlatformIO for project layout
2017-02-06 20:56:46 +11:00