b2c27b7eb0
Initial commit of the unit testing framework
2020-01-24 12:21:12 +11:00
b3a7ba8eac
Some initial ground work for the SD logging
2019-12-19 17:31:02 +11:00
77975a0a59
Fix idle advance delay and add baro correction comms ( #279 )
2019-11-11 14:32:49 +11:00
169bee0a67
More complete support for table switching
2019-09-02 17:01:03 +10:00
f088c72c96
Most of the base logic for the conditional and input based table switching
2019-08-20 09:44:18 +10:00
15cbb9a4e5
Most of the initial closed loop VVT base work
2019-08-08 16:26:59 +10:00
8e9be7ef17
Warnings cleanup
2019-07-12 16:46:34 +10:00
834d80d859
Multiple fixes for 2nd fuel table. Seems to be working
2019-06-04 18:27:28 +10:00
ff9c89403c
Initial (non-functioning) work on MAPdot based AE
2019-05-04 19:35:08 +10:00
827552a8fd
Fix for bad CRC messages introduced in c7063eb268
2019-05-02 12:34:59 +10:00
c7063eb268
Minor RAM cleanup
2019-04-22 00:23:44 +10:00
64f300206b
Split the sendPage functions between binary and ascii
2019-04-20 17:14:37 +10:00
dc7b789a4e
Add idle rpm target, delta, idle on statuses. Closes #215
2019-04-16 23:20:42 +10:00
8df2c46833
Initial memory allocation for 2nd fuel map
2019-04-10 15:58:38 +10:00
f41f95a60c
More testing of doxygen
2019-04-09 16:03:25 +10:00
3dee0df227
Merge branch 'master' into dev/realdash
2019-04-03 08:45:08 +11:00
49a6744e36
Complete and tested CRC32 calcs for pages
2019-03-18 16:44:29 +11:00
fe11bbde1e
Working CRC32 checks on all non-map pages
2019-03-18 00:40:35 +11:00
4f4781a234
Send dwell value as 16 rather than 8 bit to TS. Fixes #203
2019-03-15 17:35:18 +11:00
2d9069c3a3
first draft of answer to serial request 'a'
2019-02-18 22:25:02 -05:00
49be6ebf48
Swap the order of the VE map and the first settings page to remove a warning in TS
2019-02-12 16:35:33 +11:00
90de9d06f8
Some work on moving towards to the new cppcheck MISRA scanner
2019-01-23 12:05:14 +13:00
2b321a9164
Minor memory cleanup
2018-10-05 20:27:46 +10:00
2287c9086c
Add sync loss counter to log (And apply to other patterns)
2018-07-24 10:44:47 +10:00
19e258ecfb
Independent fuel and ignition load algorithms
2018-05-08 16:43:18 +10:00
1d5a79757a
Send through channel and squirt info to TS
2018-04-23 15:27:57 +10:00
33b85f3b9d
Cleanup a bunch of errors and warnings for stm32
2018-01-27 22:14:11 +11:00
b5c56495e9
Merge branch 'flextable' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2018-01-21 14:55:47 -06:00
23862103e5
extremely rough flex table editors. added flexBoostCorrection to currentStatus. shortened flex correction table names. gave each flex table its own set of eth% bins. fixed the incredibly broken EEPROM update code.
2018-01-20 16:33:14 -06:00
03e6c2d476
Software controlled auto-reset prevention
...
This feature enables the Speeduino to set a pin high that will tell the Arduino's 8U2/16U2 firmware not to reset on new serial connections. This requires a slightly modified firmware for the 8U2/16U2 that will only reset on DTR when PB7 is also held low.
2018-01-01 15:39:43 -06:00
98ea973a80
Add individual pulse widths to the comms output
2017-12-07 11:42:44 +11:00
9d2192d04c
Fix the array (packet) sizes for both the main serial and CAN
2017-11-01 14:55:47 +11:00
34cd1d3cfd
Corrected scope for valueOffset to fix chunk write issue
2017-10-09 11:52:27 +11:00
9af5534de4
Better handling of live chunk receives in comms
2017-10-08 11:07:49 +11:00
485affc81e
Cleanup some of the strings to reduce sketch size for Bluepill
2017-10-04 18:02:12 +11:00
515f0a626f
MISRA cleanup from the comms work
2017-09-20 14:38:42 +10:00
5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
be98d2d0d3
Addition of comms for Pg 11
2017-07-24 09:50:50 +10:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
d44410fff4
MISRA compliant comms.ino
2017-06-02 21:56:21 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
Josh Stewart
iLeeeZi
Bruno Bousquet
Murray
darren siepka