98ea973a80
Add individual pulse widths to the comms output
2017-12-07 11:42:44 +11:00
9d2192d04c
Fix the array (packet) sizes for both the main serial and CAN
2017-11-01 14:55:47 +11:00
34cd1d3cfd
Corrected scope for valueOffset to fix chunk write issue
2017-10-09 11:52:27 +11:00
9af5534de4
Better handling of live chunk receives in comms
2017-10-08 11:07:49 +11:00
485affc81e
Cleanup some of the strings to reduce sketch size for Bluepill
2017-10-04 18:02:12 +11:00
515f0a626f
MISRA cleanup from the comms work
2017-09-20 14:38:42 +10:00
5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
be98d2d0d3
Addition of comms for Pg 11
2017-07-24 09:50:50 +10:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
d44410fff4
MISRA compliant comms.ino
2017-06-02 21:56:21 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
eb334b5a1c
Cleanup of variable names and Enable check
2017-03-15 23:19:08 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
c555bbc060
Move to PlatformIO for project layout
2017-02-06 20:56:46 +11:00
Josh Stewart
darren siepka