5b3df5ac4d
Merge config pages 6 and 7
2017-09-19 14:51:33 +10:00
6763ff15b4
Initial work on new serial comms protocols (Working, but slow)
2017-09-19 14:10:07 +10:00
0694564ed1
September dev signature
2017-09-10 00:51:10 +10:00
d8d1d8ff04
August signature and base tune
2017-09-09 22:07:46 +10:00
3b33094230
Initial commit of new Ideal PID implementation (Active for boost control)
2017-09-03 20:28:49 +10:00
b8706f69b2
Re-add scope guard in comms.ino
2017-08-25 17:26:24 +10:00
fc06ce4d1b
Minor ini and comms cleanup
2017-08-24 17:24:28 +10:00
9e4c191d7b
Use correct page size for Pg 11
2017-08-24 08:33:32 +10:00
345bf5d405
August dev signatures
2017-08-06 22:15:15 +10:00
be9ad6bb85
Fix missing value for TPS calibration
2017-08-06 17:12:57 +10:00
523c05fda9
July signature and base tune
2017-07-30 23:07:48 +10:00
9cd31f335f
Cleanup of comms variables
2017-07-27 14:04:38 +10:00
be98d2d0d3
Addition of comms for Pg 11
2017-07-24 09:50:50 +10:00
905a8642ff
July dev signature
2017-07-17 16:36:44 +10:00
e5591bc7bc
June signature and base tune
2017-07-11 16:21:44 +10:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
94f67f6a49
removed test code
2017-06-13 03:12:32 +01:00
8d996f7b31
Merge branch 'can_io_2' of https://github.com/Autohome2/speeduino into can_io_2
...
# Conflicts:
# speeduino/comms.ino
2017-06-13 03:07:12 +01:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
b62f943bb3
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 02:58:00 +01:00
ae7a75673f
June dev signature
2017-06-06 08:32:08 +10:00
02564d3218
May signature
2017-06-05 14:28:28 +10:00
780c9ab2ee
Logic change from some of the MISRA work
2017-06-04 22:48:59 +10:00
d44410fff4
MISRA compliant comms.ino
2017-06-02 21:56:21 +10:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
89296bea44
Merge pull request #79 from VitorBoss/STM_dev
...
Updated STM work
2017-04-23 19:27:30 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
fc577c9a59
Updated STM work
2017-04-21 11:30:13 -03:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
5d031a0fc9
Signature and base tune for March
2017-04-03 16:12:24 +10:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
a5e47cb3ff
Compile (but not link) cleanly on stm32
2017-03-23 17:19:18 +11:00
d38a9584c5
Bunch of little stm32 compatibility tweaks
2017-03-23 12:25:51 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
eb334b5a1c
Cleanup of variable names and Enable check
2017-03-15 23:19:08 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
d686364e69
March dev signature
2017-03-08 13:19:30 +11:00
a0ede949b7
Base tune and signature update for Feb release
2017-03-03 12:51:34 +11:00
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
0fc212ec11
Remove all traces of PSI based boost targets
...
The metric conspiracy lives! Muhahahahahah
2017-02-09 14:24:07 +11:00
74137338e5
February dev signature
2017-02-09 09:54:25 +11:00
c555bbc060
Move to PlatformIO for project layout
2017-02-06 20:56:46 +11:00
Josh Stewart
darren siepka
Vitor Moreno B. Sales