Josh Stewart
|
4cc3c9e8d2
|
Multiply MAP option
|
2016-06-01 14:57:53 +10:00 |
|
Josh Stewart
|
2cb7675d5c
|
Code identifier checking (Disabled until TS3 is released)
|
2016-06-01 13:19:31 +10:00 |
|
Josh Stewart
|
017501878e
|
Trigger based locked timing for Basic Distributor and 4G63 decoders
|
2016-05-29 19:41:31 +10:00 |
|
Josh Stewart
|
7b9ef56e07
|
Further tuning of the PID algorithm
|
2016-05-28 23:53:15 +10:00 |
|
Josh Stewart
|
6c5722c595
|
Initial complete closed loop boost control. NOT TESTED!
Only works with kpa in TunerStudio.
|
2016-05-22 20:12:44 +10:00 |
|
Josh Stewart
|
c10da12683
|
Initial work on closed loop boost
|
2016-05-15 21:05:49 +10:00 |
|
Josh Stewart
|
366f75c38b
|
Option to allow reverse direction for PWM valve
|
2016-05-15 19:29:52 +10:00 |
|
Josh Stewart
|
97570a294e
|
Testing commit of the ignition bypass system
|
2016-04-25 09:09:04 +10:00 |
|
Josh Stewart
|
e61dcc566b
|
Initial commit of the trigger filter setting (Only currently applies to dual wheel)
|
2016-04-17 02:38:06 +10:00 |
|
Josh Stewart
|
1fe8f115f8
|
Initial work on boost cutout
|
2016-04-12 23:22:14 +10:00 |
|
Josh Stewart
|
4afbf17f12
|
Adapt PID usage to float free library
|
2016-04-07 13:28:13 +10:00 |
|
Josh Stewart
|
be0ccf6a5f
|
Much improved launch control
|
2016-04-05 20:44:11 +10:00 |
|
Josh Stewart
|
85157f052e
|
ew indicators for launch control and rev limiters
|
2016-03-30 21:34:55 +11:00 |
|
Josh Stewart
|
e85de746b0
|
Allow launch to be triggered on high or low signal
|
2016-03-26 08:45:48 +11:00 |
|
Josh Stewart
|
2fb51787ad
|
Fix average cycle MAP reading when engine is off (Also begins move of sensor readings to own file)
|
2016-03-09 16:40:11 +11:00 |
|
Josh Stewart
|
21d2078a4e
|
Significant improvements to analog sensor readings (Filtering and read strategy)
|
2016-03-01 14:39:50 +11:00 |
|
Josh Stewart
|
23021ccb84
|
Add DFCO indicator in TunerStudio
|
2016-03-01 11:53:08 +11:00 |
|
Josh Stewart
|
e00019bddc
|
Initial commit of DFCO (Untested on a car, working on bench)
|
2016-02-25 13:11:13 +11:00 |
|
Josh Stewart
|
af16c86af7
|
Initial sequential groundwork
|
2016-02-14 16:03:25 +11:00 |
|
Josh Stewart
|
5dbb6d9240
|
Large improvements to the ADC filtering system (Performance and flexibility)
|
2016-02-10 10:48:25 +11:00 |
|
Josh Stewart
|
0830e6d834
|
Experimental 3 wire idle support
|
2016-01-13 17:06:55 +11:00 |
|
Josh Stewart
|
be51ddf852
|
Rename injector variable to better reflect its purpose
|
2016-01-05 08:00:47 +11:00 |
|
Josh Stewart
|
2c747e5459
|
Initial commit of IAT based timing retard
|
2016-01-03 07:40:27 +11:00 |
|
Josh Stewart
|
3b3541698e
|
Fix for missing ignition signals on channels 3 and 4
|
2015-12-31 16:25:57 +11:00 |
|
Josh Stewart
|
65f430a930
|
Add fuel pump priming
|
2015-12-21 15:45:52 +11:00 |
|
Josh Stewart
|
934bafe5a0
|
Remove unused cold pulse width settings. These were legacy and replaced with WUE.
|
2015-12-15 21:10:30 +11:00 |
|
Josh Stewart
|
271b3dc37a
|
Fix for some misaligned bits in config page 7. Caused a warning about mismatching O2 sensor type
|
2015-12-15 17:11:33 +11:00 |
|
Josh Stewart
|
91a0649600
|
Experimental MAP error checking, tracking and filtering
|
2015-12-13 09:24:08 +11:00 |
|
Josh Stewart
|
ed02ba79f7
|
Better tuned tooth logger
|
2015-10-30 20:35:45 +11:00 |
|
Josh Stewart
|
7ea2757c95
|
Code optimisations, mostly small
|
2015-10-30 20:11:16 +11:00 |
|
Josh Stewart
|
8975698cdf
|
Continued work on spark output modes
|
2015-10-29 06:13:16 +11:00 |
|
Josh Stewart
|
5cd8b6852e
|
Improvements to tooth logger
|
2015-10-26 06:21:12 +11:00 |
|
Josh Stewart
|
4c0585f902
|
Improvements to tooth logger
|
2015-10-25 22:13:58 +11:00 |
|
Josh Stewart
|
6fb864b0bd
|
rpmDOT added
|
2015-10-21 22:19:15 +11:00 |
|
Josh Stewart
|
fe1d58cd38
|
Basics of launch control in place
|
2015-10-18 23:20:16 +11:00 |
|
Josh Stewart
|
fb8c93da10
|
IAT density correction re-added
No idea where this had disappeared to
|
2015-10-18 09:29:41 +11:00 |
|
Josh Stewart
|
fda74b22cc
|
Initial work on MAP sampling options
|
2015-10-09 12:42:09 +11:00 |
|
Josh Stewart
|
57607b8ac0
|
Experimental fast digital IO work
|
2015-09-30 14:47:48 +10:00 |
|
Josh Stewart
|
0630d85f39
|
Allow variable idle PWM frequency
|
2015-09-29 17:21:00 +10:00 |
|
Josh Stewart
|
4d4cd29a19
|
Complete but untested boost and vvt
|
2015-09-27 16:41:07 +10:00 |
|
Josh Stewart
|
d5855eb7cd
|
Further work on the boost and vvt controls
|
2015-09-27 09:14:29 +10:00 |
|
Josh Stewart
|
bc1b82b6cd
|
Minor ini cleanup
|
2015-09-18 08:25:46 +10:00 |
|
Josh Stewart
|
edcc52f7cc
|
Initial MAP sensor calibration work
|
2015-09-16 22:23:06 +10:00 |
darren siepka
|
12f11cc1a3
|
added second o2 support
|
2015-09-14 00:16:46 +01:00 |
|
Josh Stewart
|
b3fd8b1f56
|
Add option to disable dwell limiter
|
2015-09-08 11:17:47 +10:00 |
|
Josh Stewart
|
2afa003939
|
Minor changes to tooth history log
|
2015-09-08 09:49:34 +10:00 |
|
Josh Stewart
|
d126abfd5f
|
Tested and working stepper idle control
|
2015-08-26 13:27:50 +10:00 |
|
Josh Stewart
|
c63c581e61
|
Complete but untested idle control
|
2015-08-21 14:14:47 +10:00 |
|
Josh Stewart
|
3c6a39a9af
|
Groundwork idle control algorithms
|
2015-08-20 23:21:27 +10:00 |
|
Josh Stewart
|
dd08d52db2
|
Add duty cycle limit option
|
2015-06-12 13:18:36 +10:00 |