c35ed913a1
March dev firmware sigs
2018-03-14 23:10:30 +11:00
0a8d5e21c5
Feb 2018 signature and base tune
2018-03-10 20:55:21 +11:00
981d087d64
Work on the dynamic ignition functions
2018-03-10 14:07:29 +11:00
4183be51f2
Fast versions of millis() and micros() that use timer5 rather than timer0. Current disabled
2018-03-10 14:07:06 +11:00
d4f0bdc03e
Fix potential issue that would prevent sync on 4cyl Daihatsu +1 patterns
2018-03-01 16:29:20 +11:00
4c47ea93d3
Add a check that prevents staged injection from trying to run when there are more cylinders than injection channels
2018-02-22 23:10:35 +11:00
684f668c84
changed ini for page 10 unused bytes to match the convention used in other config pages. reformatted the reset control config page section. fixed first element of flex bins not being initialized to 0.
2018-02-17 11:46:42 -06:00
7477ba3322
MISRA errors cleanup
2018-02-12 10:45:02 +11:00
d646553b6f
Fix for 24x decoder not syncing after startup
2018-02-06 21:47:02 +11:00
11a0c8069e
Fix initial state of the dual wheel decoder on first rev after sync
2018-02-05 18:05:58 +11:00
0c374cf081
Prevent overflow of fuel when RPM < 115 and sequential is selected
2018-02-05 18:05:36 +11:00
0c5b3ef006
Add a 1s cache timeout for the 2D table caches
2018-02-05 17:31:22 +11:00
c038ebb1d7
Fix bug that prevents the per tooth based timing from functioning
2018-02-05 16:13:26 +11:00
725b93e083
Add additional caching on 2D table lookups
2018-02-05 12:44:24 +11:00
dfa48ed250
Fix for rare overflow issue that could cause an incorrect pulse width at very low RPM (<200rpm)
2018-02-05 09:39:46 +11:00
33b85f3b9d
Cleanup a bunch of errors and warnings for stm32
2018-01-27 22:14:11 +11:00
b1c307b01b
Fixup errors from last merge
2018-01-26 00:37:38 +11:00
05ebf72e53
Merge branch 'master' into 0x15e-master-amalgamation
2018-01-25 17:25:11 +11:00
9dfc8e0429
8 channel dynamic work to allow stm32 and teensy to compile
2018-01-24 16:23:15 +11:00
8e2e3f125b
Convert all tables in code to match the numbering in the ini (Probably has bugs for now)
2018-01-24 12:05:50 +11:00
c0f0cd2a0a
Merge branch 'master' into 0x15e-master-amalgamation
2018-01-23 16:52:19 +11:00
80a77d4c4a
More work on the dynamic channel usage
2018-01-23 16:14:03 +11:00
c3173296f5
Some initial ground work for the dynamic inj/ign assignment
2018-01-22 12:21:33 +11:00
b5c56495e9
Merge branch 'flextable' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2018-01-21 14:55:47 -06:00
9369ec73d8
Merge branch 'reset-lock' of https://github.com/0x15e/speeduino into 0x15e-master-amalgamation
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-21 14:32:51 -06:00
8e789d4644
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# reference/speeduino.ini
# speeduino/globals.h
2018-01-20 18:16:19 -06:00
23862103e5
extremely rough flex table editors. added flexBoostCorrection to currentStatus. shortened flex correction table names. gave each flex table its own set of eth% bins. fixed the incredibly broken EEPROM update code.
2018-01-20 16:33:14 -06:00
264090863d
Merge pull request #118 from ConnerMcLaughlin/master
...
Launch Control TPS II
2018-01-21 07:18:51 +11:00
929756b63a
Merge branch 'master' of https://github.com/noisymime/speeduino into flextable
...
# Conflicts:
# .gitignore
# reference/speeduino.ini
# speeduino/globals.h
2018-01-19 22:24:02 -06:00
2350d5d785
Table-based flex fuel corrections
...
Changed the linear low / high flex fuel correction method to a table2D-based one.
2018-01-19 21:25:01 -06:00
d07d20ffb8
ini spec version bump to maximum supported by the current stable TunerStudio. removed debug code from comms.ino. updated ini file so that only appropriate options will be shown based on whether the connected Speeduino is using the custom firmware.
2018-01-16 20:02:04 -06:00
b6096329d8
cam4minus1 var is now trigPatternSec
...
All the instances of the variable name cam4minus1 is changed to trigPatternSec
2018-01-15 20:38:37 -06:00
b2ed338f2e
MISRA violation fix
...
rule 12.1 was being violated and this is the fix where several sets of parentheses are removed.
2018-01-15 20:21:09 -06:00
0622666434
Special fix for STM32F103C8 uCs
...
Was not compiling because of misplaced and/or insufficient preprocessor directives
2018-01-14 23:32:24 -06:00
52701e98ad
Initial commit for missing tooth secondary
...
This also includes setups that have Toyota 36-2+3 trigger wheels to work.
2018-01-14 20:23:25 -06:00
124c0d51da
Launch Control TPS II
...
Adding TPS limit on launch control
2018-01-14 17:42:38 -06:00
27641514f4
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
...
# Conflicts:
# reference/speeduino.ini
2018-01-14 11:29:29 -06:00
2819adb865
Custom bootloader recognition
...
Added a new serial command that allows a custom 16u2 firmware to let the speeduino know about itself. After issuing a `, the speeduino will expect one more byte indicating the capabilities level of the custom firmware (only 1 for now).
2018-01-12 21:37:21 -06:00
dd9941ce5d
Introduce end-of-line normalization
2018-01-12 14:04:43 +11:00
d49d8f5fb7
SpeedyMAP initial work on RPM detection
2018-01-12 13:54:31 +11:00
81d8ccd358
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-09 18:20:47 -06:00
e2dfeeb93d
Revised launch/clutch default pins
2018-01-10 00:12:14 +11:00
6c8e238697
January dev signature
2018-01-10 00:11:57 +11:00
6d0e93bc58
display a different message on U command if reset control is disabled
2018-01-07 18:54:45 -06:00
43f0d35839
Merge branch 'master' of https://github.com/noisymime/speeduino into reset-lock
2018-01-07 16:22:55 -06:00
ae8ea08d41
Reset Control
...
Changed reset lock feature to a more general "reset control" feature. Moved reset control settings to the general Settings menu. added a serial U command that will halt comms and set the control pin low when another byte is received to facilitate reset control for devices that lack an AtmegaXXu2 usb controller. Improved context help for reset control. Corrected reset lock status indicator on / off labels. moved reset control setup to utils.ino.
2018-01-07 16:22:18 -06:00
f474a95dc5
December 2017 signature and base tunes
2018-01-03 21:52:25 +11:00
a2e1379fd6
MISRA cleanup
2018-01-03 20:48:35 +11:00
3a98d08c1a
Prevent staging and sequential trying to function at once
2018-01-03 20:12:37 +11:00
9f53002b9d
Adjust injector setting priority so that sequential will override the Simultaneous/Alternating option
2018-01-03 17:27:22 +11:00
Josh Stewart
Murray
ConnerMcLaughlin