8db13859e1
Merge branch 'master' into can_io_2
2017-06-20 02:44:51 +01:00
35dfa6395d
support read values(16channel) from gpio or other external device . other device can also access the speeduino data values(realtime)
...
all via serial3
2017-06-20 02:29:55 +01:00
5c25590f82
Fix warnings for PSIG :)
2017-06-14 18:07:06 +10:00
0296f06438
changes to serial3 protocol and further tidyng with new canserial use
2017-06-13 03:02:50 +01:00
ae7a75673f
June dev signature
2017-06-06 08:32:08 +10:00
4f62900cba
May base tune file
2017-06-05 14:41:58 +10:00
02564d3218
May signature
2017-06-05 14:28:28 +10:00
3dd5ab7370
Tentatively working lambda option
2017-05-27 22:16:42 +10:00
98c3a51ec2
WUE VEAL testing added (Currently disabled)
2017-05-26 13:09:19 +10:00
81c548a9e8
Tentative 6 cylinder support (3000GT) added to 4G63 decoder
...
Requested in #76
Needs testing. Select the decoder and set cylinders to 6.
Note that the Medium and Aggressive trigger filters do NOT currently
work for 6 cylinders and should not be used.
2017-05-16 16:49:35 +10:00
1db7be4a33
Flex fuel boost adder
2017-05-12 18:14:14 +10:00
bcd7b29b59
Merge pull request #86 from Autohome2/can-serial3
...
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 21:53:19 +10:00
bffb4fb72f
r command bug fixes and further multiprocessor can and serial3 support
2017-05-11 00:08:24 +01:00
cfebe84514
Belated May dev signature
2017-05-10 13:55:26 +10:00
a7460f93d2
Merge pull request #85 from Autohome2/can-serial3
...
serial3 and canbus integration improvements
2017-05-10 12:15:29 +10:00
04a6866115
Allow spark advance values below 0 in the main table
2017-05-09 17:29:55 +10:00
49a23d9a33
This version is based from the can-serial3 branch which was updated from josh's master on 07/05/2017
...
Before change it compiled at
bytes of 63,444 flash(24%) and 4137 bytes of ram(50%) used
upon pr submission this changed to
bytes of 63,574 flash(25%) and 4155 bytes of ram(50%) used
Changes were to allow the use of the "r" command to access specific data in the realtime list
It contains minor changes to the ini file to link to the help for serial3 and can interface.
also change 0x07 to 0x30(dec48) as discussed on slck with josh for the r command
added teensy and stm32 can references and some specific canwork for teensy3.5
need to use pawelsky flexcan library (https://github.com/pawelsky/FlexCAN_Library )
2017-05-08 23:15:03 +01:00
b0d0c40bec
April signature and base tune
2017-05-06 23:43:57 +10:00
fa9f418c35
Resolve all pr/77 conflicts
2017-05-02 21:17:33 +10:00
3f099f06f1
Merge branch 'master' into pr/77
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.ino
2017-05-02 12:25:51 +10:00
4380f8b0d5
Move to TS optimised serial comms model + many minor serial improvements
2017-04-22 23:31:13 +10:00
71e963e196
Log dwell as a float rather than an int
2017-04-22 10:03:10 +10:00
538bc5f0bf
Initial commit of dwell limiting when it exceeds maximum time in revolution
2017-04-21 17:29:09 +10:00
ac37fafc84
April dev firmware
2017-04-15 08:40:29 +10:00
9bff58a265
added 8ch input over serial3 , displays data in TS live and logs to TS log file.
...
Data format follows j1939 type methods , see protocol doc
2017-04-09 01:17:36 +01:00
5d031a0fc9
Signature and base tune for March
2017-04-03 16:12:24 +10:00
34b9adb777
Add stepper idle disable function for DRV8825
2017-04-02 21:17:29 +10:00
676a001fb8
Initial commit of Subaru 6/7 (Likely has bugs)
2017-03-31 22:39:33 +11:00
822c400c01
Fix for potentially wrong initialisation of the on/off idle control
2017-03-30 00:01:52 +11:00
e96feaa560
Add VW/Audi/Porsche MAP sensor
2017-03-29 20:51:11 +11:00
4897e44f55
Merge branch 'master' into pr/73
...
# Conflicts:
# reference/speeduino.ini
# speeduino/comms.h
# speeduino/comms.ino
# speeduino/globals.h
2017-03-25 09:17:06 +11:00
8fc87e062a
Fixes for closed loop stepper idle (Now ready for wider testing)
2017-03-22 12:44:22 +11:00
697e3a2c17
Add option to disable resync once every cycle (Dual wheel, Audi 135 and 4G63)
2017-03-21 17:19:07 +11:00
880947746f
Many small updates to the idle system (Including additional logging)
2017-03-20 22:29:42 +11:00
c28547dc3a
Add a bunch more values to the log output (Including boost duty)
2017-03-16 18:17:12 +11:00
35e67e5ee6
Fix incorrect memory addresses in ini for boost and flex
...
Fix still required for developer brain fart.
2017-03-13 17:02:54 +11:00
31836511a3
Initial closed loop stepper idle (Not quite complete)
2017-03-10 20:34:39 +11:00
abef8df43f
Fix warnings in TS due to unterminated sentences
2017-03-10 13:16:56 +11:00
74cf93b979
add test modes to injector and spark outputs
2017-03-10 00:46:11 +00:00
d686364e69
March dev signature
2017-03-08 13:19:30 +11:00
a0ede949b7
Base tune and signature update for Feb release
2017-03-03 12:51:34 +11:00
707d65cac8
Shuffle around memory to make upgrades simpler
2017-02-26 16:33:03 +11:00
2e5a45463b
Additional default pins to prevent weirdness on upgrades
2017-02-21 16:51:50 +11:00
0d055dc7f1
Allow min and max duty cycles for closed loop idle and boost
2017-02-20 17:57:46 +11:00
650a096175
Initial (untested) commit of Nissan 360. ONLY support 4 cylinder so far
2017-02-12 18:35:18 +13:00
667e80dc26
Add boost target to log
2017-02-12 14:31:37 +13:00
ced30ce3a7
Remove PSI Boost option from TS
2017-02-09 14:26:21 +11:00
0fc212ec11
Remove all traces of PSI based boost targets
...
The metric conspiracy lives! Muhahahahahah
2017-02-09 14:24:07 +11:00
74137338e5
February dev signature
2017-02-09 09:54:25 +11:00
b2ca13c9aa
Merge pull request #64 from Autohome2/can-io
...
Can io
2017-02-05 21:42:33 +11:00
dd92c40af4
Base tune and signature for Jan 2017
2017-02-01 17:42:11 +11:00
294192c52c
Merge branch 'master' into master
2017-01-30 20:13:33 +11:00
425ec75828
Remove selectable pin options from being on pins 1/2 (Comms pins)
2017-01-28 08:39:10 +11:00
9011c190e0
Fix for fan hysteresis not operating correctly
2017-01-27 16:38:52 +11:00
656fc8b77a
added page 10 , a 128byte page for use with upcoming CANBUS integration.
2017-01-26 22:58:21 +00:00
ad825c2051
Allow for use of negative advance (i.e. ATDC) values for launch
2017-01-21 12:58:45 +11:00
770da8b43e
Selectable boost and VVT pins
2017-01-19 14:54:07 +11:00
2ee0a91c0b
BIG cleanup of #includes to be more C compliant
2017-01-18 17:37:55 +11:00
4c1c9a051e
Slightly improved flat shift / launch logic
2017-01-18 13:20:04 +11:00
da3f460152
Don't cutoff the decimal values of afrTarget in data logs
2017-01-18 10:24:20 +11:00
109f64f342
Memory allocation and TS interface for flat shift
2017-01-17 13:33:41 +11:00
0e176f0724
Enable MAP load values up to 511
2017-01-17 10:51:53 +11:00
6b368e998d
Add more pressure gauge options (PSI, inhg)
2017-01-16 14:41:40 +11:00
e58ad87ed2
Add check to prevent potential crash when switching IAC methods (Teensy)
2017-01-12 22:33:26 +11:00
251000893c
Jan 17 dev signature
2017-01-06 08:26:11 +11:00
7d70f688aa
Signature and base tune for Dec 2016 release
2017-01-05 17:20:54 +11:00
7a87363618
Add MAP x RPM variable to datalog
2017-01-04 22:34:25 +11:00
6c17cde092
Better AE curve range
2017-01-01 19:56:18 +11:00
a80ff171f5
Actually remember to allow 5 cylinder selection in TS
2016-12-29 08:46:20 +11:00
6ac8807399
Global injector closing angle TS setting
...
Adding TS setting in "Injector Characteristics"
2016-12-27 13:35:46 -06:00
b3a04cc19b
Expose some pieces of flex info to TunerStudio
2016-12-26 20:53:37 +11:00
48712c12fa
Add settings to select pins for fuel pump and fan
2016-12-21 13:21:27 +11:00
9889a1ff18
December dev signature
2016-12-11 23:48:41 +11:00
397fb56445
Remove 2 default values that aren't used any more
2016-12-11 22:49:48 +11:00
fd9a140374
Signature for November release
2016-12-05 20:44:25 +11:00
022e82d66f
Minor changes to TS AE dialog
2016-11-30 17:17:51 +11:00
049f3081b1
Complete fuel correction for flex
2016-11-28 20:37:24 +11:00
aac73d785b
Further groundwork for flex fuel adjustments
2016-11-28 16:58:24 +11:00
8540f64620
New flex fuel dialog
2016-11-27 21:47:22 +11:00
e7113b03a1
Enable injector angle options for cyls 3/4 when sequential is selected
2016-11-24 07:05:57 +11:00
6921107373
Development signature for Nov (Late)
2016-11-18 14:31:03 +11:00
af40812586
Allow for leading/trailing edge selection on missing tooth and dual wheel decoders
2016-11-18 14:28:33 +11:00
de3ee45f7f
Signatures for October release
2016-11-08 17:05:57 +11:00
f9e226d828
Complete and tested fuel trim
2016-11-02 12:13:17 +11:00
7aeff0cbda
Further memory fixes for sequential trims
2016-11-01 23:19:16 +11:00
30a48dc364
Fixes for trim table comms misalignment
2016-11-01 12:37:00 +11:00
f0dcb0c756
Minor sequential fixes
2016-11-01 10:11:15 +11:00
0a38467fc6
Complete (untested) sequential fuel trim
2016-10-27 17:27:08 +11:00
940c3a5be7
Further memory work on the sequential tables
2016-10-27 08:49:27 +11:00
1f87c31e01
Load and save routines for the 4 fuel trim tables
2016-10-25 17:31:44 +11:00
0df9b14acd
Add MPX4400 MAP sensor calibration
2016-10-19 10:38:55 +11:00
34b571226e
Further sequential work
2016-10-15 21:52:20 +11:00
241314e42d
Low res (1ms) timer enabled for Teensy
2016-10-10 22:38:40 +11:00
cb4d0b9ab6
Initial commit of sequential fuel and spark
2016-10-04 20:28:51 +11:00
a9798517e9
Development signature for Oct
2016-10-03 17:32:04 +11:00
dc40b0a0a8
More formatting changes
2016-10-01 02:06:09 +10:00
b739618ebc
Bring formatting in line with standards
2016-10-01 01:57:57 +10:00
4d0fe1836a
Merge branch 'master' into pr/46
...
Conflicts:
reference/Speeduino base tune.msq
2016-10-01 01:45:18 +10:00
509d36cf34
September base tune file
2016-09-30 22:35:41 +10:00
484e92a8bc
September final signature
2016-09-30 21:18:23 +10:00
f2ee98902d
Add live graph to the Accel Enrichments dialog
2016-09-30 16:11:16 +10:00
a348d20b82
Merge pull request #20 from noisymime/master
...
update with josh 29092016
2016-09-29 13:12:08 +01:00
8b05abcd7a
Fix incorrect scaling on odd fire angles
2016-09-28 15:03:52 +10:00
e247f0193c
fixed a bug that bugged a TS bug
...
not enough valids
2016-09-26 22:36:47 -05:00
3430203ab1
updated msq and ini with can interface enable option in accessories
2016-09-26 22:16:30 +01:00
83347aabf6
Added TS setting for launch control pullup option
2016-09-26 11:50:04 -05:00
091cf250ff
Completed non-360 degree decoder
2016-09-22 00:58:04 +10:00
dd06725397
Initial groundwork for the non-360 decoder
2016-09-19 23:31:38 +10:00
98cc410492
Add pin mapping for MX5 PNP
2016-09-18 21:40:14 +10:00
fe65f4bddd
Boost PSI Corrections
2016-09-11 14:59:20 -05:00
3845d4569c
Fix for TunerStudio 3.0.7 change
2016-09-11 21:19:25 +10:00
12e1ce8617
Versioning for September 2016 dev
2016-09-01 16:28:06 +10:00
2d631211b0
Updated version files for Aug 2016
2016-08-31 16:38:31 +10:00
2b0445b4b9
Allow for custom taco output pin
2016-08-25 08:05:58 +10:00
cd6c19f96b
New gauges and cleanup in the ini
2016-08-23 18:27:23 +10:00
bcd58c941e
Add ASE into new WUE dialog
2016-08-20 21:32:00 +10:00
e283a4e1dc
Corrected alignment of some indicator bits
2016-08-16 21:47:33 +10:00
3c21771604
August pre signature
2016-08-16 21:45:15 +10:00
5f2925ab8e
Smoother starting with the 4g63 decoder
2016-08-16 21:42:08 +10:00
6945d8570c
Move to custom WUE dialog
2016-08-09 12:58:51 +10:00
da80eb5bcc
Disable experimental 5 cylinder for this month
2016-08-03 12:11:31 +10:00
0490cdcdb1
Update signature to July version (REQUIRES TS 3.0.2)
2016-07-25 22:54:49 +10:00
e81f39c1a7
Minor improvements to boost control
2016-07-22 17:30:35 +10:00
7a30bff409
Fix for bit clash on nCylinders
2016-07-15 17:36:25 +10:00
cb75452fc7
Initial work on error management
2016-07-15 17:23:30 +10:00
34e91197fa
Fix typo in ini that prevented 8 cylinders from being selected
2016-07-07 21:47:50 +10:00
990aa000a3
Allow locked cranking timing for MazdaAU decoder
2016-07-01 17:03:06 +10:00
a5536c9ffc
Initial commit of Mazda AU decoder for classified
2016-07-01 15:13:58 +10:00
94772e9b1d
Add gauge for lambda
2016-06-30 06:14:37 +10:00
6254c405ca
Potential fix for TS3 disconnection issue
2016-06-29 22:08:04 +10:00
a90d13b038
Improved flex error checking
2016-06-27 10:31:52 +10:00
5847ee5330
Initial Flex sensor reading (Currently untested)
2016-06-24 18:02:53 +10:00
3ee640e4e2
Fix for mistake in previous includeAFR commit
2016-06-21 17:33:53 +10:00
1fefada496
IncludeAFR option added
2016-06-21 17:26:05 +10:00
a59135a0e6
Add lambda output
2016-06-20 23:32:51 +10:00
18ddca5b69
Removed unused decel option from ini. Fixes #34
2016-06-17 08:05:41 +10:00
8dc7ca3b4f
Potential TS3 serial fixes
2016-06-09 22:39:42 +10:00
657592a9a4
Potential connection issues fixes
2016-06-06 06:17:35 +10:00
4cc3c9e8d2
Multiply MAP option
2016-06-01 14:57:53 +10:00
2cb7675d5c
Code identifier checking (Disabled until TS3 is released)
2016-06-01 13:19:31 +10:00
017501878e
Trigger based locked timing for Basic Distributor and 4G63 decoders
2016-05-29 19:41:31 +10:00
6c5722c595
Initial complete closed loop boost control. NOT TESTED!
...
Only works with kpa in TunerStudio.
2016-05-22 20:12:44 +10:00
c10da12683
Initial work on closed loop boost
2016-05-15 21:05:49 +10:00
366f75c38b
Option to allow reverse direction for PWM valve
2016-05-15 19:29:52 +10:00
0fc13769a9
Ini typo/tooltip fixes for issue #33
2016-04-28 15:24:38 +10:00
97570a294e
Testing commit of the ignition bypass system
2016-04-25 09:09:04 +10:00
5b0101b2ef
Fix typo on the trigger filter ini entry
2016-04-18 11:35:00 +10:00
a0fa7527d6
Expand filter configuration for decoders
2016-04-17 15:04:41 +10:00
e61dcc566b
Initial commit of the trigger filter setting (Only currently applies to dual wheel)
2016-04-17 02:38:06 +10:00
62e0147b00
Tentatively complete boost cut. Needs testing
2016-04-13 21:41:25 +10:00
1fe8f115f8
Initial work on boost cutout
2016-04-12 23:22:14 +10:00
202bfd7003
(Untested) Float free version of PID library
2016-04-07 13:27:51 +10:00
be0ccf6a5f
Much improved launch control
2016-04-05 20:44:11 +10:00
fa0c8e743c
Add Honda MAP sensor
2016-04-05 13:43:14 +10:00
85157f052e
ew indicators for launch control and rev limiters
2016-03-30 21:34:55 +11:00
a06939f4be
Working degrees F in TunerStudio
2016-03-29 21:02:02 +11:00
e85de746b0
Allow launch to be triggered on high or low signal
2016-03-26 08:45:48 +11:00
4d9f889763
Add compatibility option for TunerStudio 3
2016-03-23 19:45:11 +11:00
21d2078a4e
Significant improvements to analog sensor readings (Filtering and read strategy)
2016-03-01 14:39:50 +11:00
23021ccb84
Add DFCO indicator in TunerStudio
2016-03-01 11:53:08 +11:00
346478d94b
Neater ini and new base tune for Feb
2016-02-29 22:23:09 +11:00
51eccd984a
Initial commit of 99-05 Miata decoder
2016-02-29 18:30:17 +11:00
e00019bddc
Initial commit of DFCO (Untested on a car, working on bench)
2016-02-25 13:11:13 +11:00
bb2fcaea11
Multiple ini fixes
2016-02-18 15:00:16 +11:00
af16c86af7
Initial sequential groundwork
2016-02-14 16:03:25 +11:00
02cedcb3c6
Cleanup of curve Y Axis labels
2016-02-10 10:50:23 +11:00
a737acce1b
Labelling fixes on some curves
2016-02-05 06:25:26 +11:00
0830e6d834
Experimental 3 wire idle support
2016-01-13 17:06:55 +11:00
be51ddf852
Rename injector variable to better reflect its purpose
2016-01-05 08:00:47 +11:00
2c747e5459
Initial commit of IAT based timing retard
2016-01-03 07:40:27 +11:00
63588f8000
Minor fixes for fuel pump priming
2015-12-22 15:30:00 +11:00
65f430a930
Add fuel pump priming
2015-12-21 15:45:52 +11:00
934bafe5a0
Remove unused cold pulse width settings. These were legacy and replaced with WUE.
2015-12-15 21:10:30 +11:00
271b3dc37a
Fix for some misaligned bits in config page 7. Caused a warning about mismatching O2 sensor type
2015-12-15 17:11:33 +11:00
6472f8857e
Initial commit of Audi 135 decoder
2015-12-15 16:06:42 +11:00
455be3b7e2
Some minor work on allow F degrees in TS
2015-12-15 13:09:32 +11:00
ed02ba79f7
Better tuned tooth logger
2015-10-30 20:35:45 +11:00
8975698cdf
Continued work on spark output modes
2015-10-29 06:13:16 +11:00
5c7c5f5ad8
Fix warnings in ini file
2015-10-25 16:16:59 +11:00
6fb864b0bd
rpmDOT added
2015-10-21 22:19:15 +11:00
f08d129c40
Merge pull request #26 from Autohome2/new_help
...
new help sections and page for tunerstudio
2015-10-18 20:19:47 +11:00
d8d8085ffb
ini cleanup (more to come)
2015-10-18 20:09:12 +11:00
c6bd72bb47
updated Tunerstudio help and tidy gauge menu
2015-10-17 23:18:53 +01:00
f15d9d3bf3
ini work for launch control
2015-10-17 22:23:34 +11:00
fda74b22cc
Initial work on MAP sampling options
2015-10-09 12:42:09 +11:00
56b5fcd69d
Updated wiki images
2015-10-04 10:38:48 +11:00
b107825513
Fixes and UI for idle PWM
2015-09-30 09:27:37 +10:00
0630d85f39
Allow variable idle PWM frequency
2015-09-29 17:21:00 +10:00
85d1d55bc6
Fix boost and vvt eeprom offsets
2015-09-28 21:57:27 +10:00
9833fd5692
changed references of ms to sd
2015-09-27 21:48:30 +01:00
a78b43726c
Minor ini fixes
2015-09-27 23:01:52 +10:00
9aa9416583
Interface work for boost and vvt control
2015-09-27 22:51:10 +10:00
d5855eb7cd
Further work on the boost and vvt controls
2015-09-27 09:14:29 +10:00
e1f2f42107
Initial boost and vvt page work
2015-09-25 06:24:40 +10:00
a63c774210
Support for MPX5700 pressure sensor
2015-09-18 15:55:19 +10:00
d2516460d3
Correct logic on the soft rev limiter
2015-09-18 11:18:56 +10:00
e7743fb001
Fix MAP scaling error
2015-09-18 09:41:10 +10:00
bc1b82b6cd
Minor ini cleanup
2015-09-18 08:25:46 +10:00
edcc52f7cc
Initial MAP sensor calibration work
2015-09-16 22:23:06 +10:00
12f11cc1a3
added second o2 support
2015-09-14 00:16:46 +01:00
Autohome2
darren siepka
Josh Stewart
ConnerMcLaughlin