74 lines
3.0 KiB
C
74 lines
3.0 KiB
C
/*
|
|
These are some utility functions and variables used through the main code
|
|
*/
|
|
#include <Arduino.h>
|
|
#define MS_IN_MINUTE 60000
|
|
#define US_IN_MINUTE 60000000
|
|
|
|
/*
|
|
Returns how much free dynamic memory exists (between heap and stack)
|
|
*/
|
|
int freeRam ()
|
|
{
|
|
extern int __heap_start, *__brkval;
|
|
int v;
|
|
return (int) &v - (__brkval == 0 ? (int) &__heap_start : (int) __brkval);
|
|
}
|
|
|
|
|
|
/* The following functions help determine the required fuel constant. For more information about these calculations, please refer to http://www.megamanual.com/v22manual/mfuel.htm
|
|
Calc below are for metric inputs of temp (degrees C) and MAP (kPa) to produce kg/m3.
|
|
*/
|
|
int AIRDEN(int MAP, int temp)
|
|
{
|
|
return (1.2929 * 273.13/(temp+273.13) * MAP/101.325);
|
|
}
|
|
|
|
/*
|
|
This function retuns a pulsewidth time (in us) using a either Alpha-N or Speed Density algorithms, given the following:
|
|
REQ_FUEL
|
|
VE: Lookup from the main MAP vs RPM fuel table
|
|
MAP: In KPa, read from the sensor
|
|
GammaE: Sum of Enrichment factors (Cold start, acceleration). This is a multiplication factor (Eg to add 10%, this should be 110)
|
|
injDT: Injector dead time. The time the injector take to open minus the time it takes to close (Both in uS)
|
|
TPS: Throttle position (0% to 100%)
|
|
|
|
This function is called by PW_SD and PW_AN for speed0density and pure Alpha-N calculations respectively.
|
|
*/
|
|
unsigned int PW(int REQ_FUEL, byte VE, byte MAP, int corrections, int injOpen, byte TPS)
|
|
{
|
|
//Standard float version of the calculation
|
|
//return (REQ_FUEL * (float)(VE/100.0) * (float)(MAP/100.0) * (float)(TPS/100.0) * (float)(corrections/100.0) + injOpen);
|
|
|
|
//100% float free version, does sacrifice a little bit of accuracy.
|
|
int iVE = ((int)VE << 7) / 100;
|
|
int iMAP = ((int)MAP << 7) / 100;
|
|
int iCorrections = (corrections << 7) / 100;
|
|
int iTPS = ((int)TPS << 7) / 100;
|
|
|
|
unsigned long intermediate = ((long)REQ_FUEL * (long)iVE) >>7; //Need to use an intermediate value to avoid overflowing the long
|
|
intermediate = (intermediate * iMAP) >> 7;
|
|
intermediate = (intermediate * iCorrections) >> 7;
|
|
intermediate = (intermediate * iTPS) >> 7;
|
|
intermediate += injOpen; //Add the injector opening time
|
|
if ( intermediate > 65535) { intermediate = 65535; } //Make sure this won't overflow when we convert to uInt. This means the maximum pulsewidth possible is 65.535mS
|
|
//unsigned int final = (unsigned int)(intermediate);
|
|
return (unsigned int)(intermediate);
|
|
|
|
}
|
|
|
|
//Convenience functions for Speed Density and Alpha-N
|
|
unsigned int PW_SD(int REQ_FUEL, byte VE, byte MAP, int corrections, int injOpen)
|
|
{
|
|
//return PW(REQ_FUEL, VE, MAP, corrections, injOpen, 100); //Just use 1 in place of the TPS
|
|
return PW(REQ_FUEL, VE, 100, corrections, injOpen, 100); //Just use 1 in place of the TPS
|
|
}
|
|
|
|
unsigned int PW_AN(int REQ_FUEL, byte VE, byte TPS, int corrections, int injOpen)
|
|
{
|
|
//Sanity check
|
|
if(TPS > 100) { TPS = 100; }
|
|
//return PW(REQ_FUEL, VE, 100, corrections, injOpen, TPS); //Just use 1 in place of the MAP
|
|
return PW(REQ_FUEL, VE, 100, corrections, injOpen, 100); //Just use 1 in place of the MAP
|
|
}
|