255 lines
9.6 KiB
C++
255 lines
9.6 KiB
C++
/*
|
|
Returns how much free dynamic memory exists (between heap and stack)
|
|
*/
|
|
#include "utils.h"
|
|
|
|
int freeRam ()
|
|
{
|
|
extern int __heap_start, *__brkval;
|
|
int v;
|
|
return (int) &v - (__brkval == 0 ? (int) &__heap_start : (int) __brkval);
|
|
}
|
|
|
|
void setPinMapping(byte boardID)
|
|
{
|
|
switch(boardID)
|
|
{
|
|
case 0:
|
|
//Pin mappings as per the v0.1 shield
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 11; //Output pin injector 3 is on
|
|
pinInjector4 = 10; //Output pin injector 4 is on
|
|
pinCoil1 = 6; //Pin for coil 1
|
|
pinCoil2 = 7; //Pin for coil 2
|
|
pinCoil3 = 12; //Pin for coil 3
|
|
pinCoil4 = 13; //Pin for coil 4
|
|
pinTrigger = 2; //The CAS pin
|
|
pinTPS = A0; //TPS input pin
|
|
pinMAP = A1; //MAP sensor pin
|
|
pinIAT = A2; //IAT sensor pin
|
|
pinCLT = A3; //CLS sensor pin
|
|
pinO2 = A4; //O2 Sensor pin
|
|
break;
|
|
case 1:
|
|
//Pin mappings as per the v0.2 shield
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 10; //Output pin injector 3 is on
|
|
pinInjector4 = 11; //Output pin injector 4 is on
|
|
pinCoil1 = 28; //Pin for coil 1
|
|
pinCoil2 = 24; //Pin for coil 2
|
|
pinCoil3 = 40; //Pin for coil 3
|
|
pinCoil4 = 36; //Pin for coil 4
|
|
pinTrigger = 20; //The CAS pin
|
|
pinTrigger2 = 21; //The Cam Sensor pin
|
|
pinTPS = A2; //TPS input pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinO2 = A8; //O2 Sensor pin
|
|
pinBat = A4; //Battery reference voltage pin
|
|
pinDisplayReset = 48; // OLED reset pin
|
|
break;
|
|
case 2:
|
|
//Pin mappings as per the v0.3 shield
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 10; //Output pin injector 3 is on
|
|
pinInjector4 = 11; //Output pin injector 4 is on
|
|
pinCoil1 = 28; //Pin for coil 1
|
|
pinCoil2 = 24; //Pin for coil 2
|
|
pinCoil3 = 40; //Pin for coil 3
|
|
pinCoil4 = 36; //Pin for coil 4
|
|
pinTrigger = 18; //The CAS pin
|
|
pinTrigger2 = 19; //The Cam Sensor pin
|
|
pinTPS = A2;//TPS input pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinO2 = A8; //O2 Sensor pin
|
|
pinBat = A4; //Battery reference voltage pin
|
|
pinDisplayReset = 48; // OLED reset pin
|
|
pinTachOut = 49; //Tacho output pin
|
|
pinIdle1 = 5; //Single wire idle control
|
|
pinFuelPump = 4; //Fuel pump output
|
|
|
|
break;
|
|
|
|
case 3:
|
|
//Pin mappings as per the v0.4 shield
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 10; //Output pin injector 3 is on
|
|
pinInjector4 = 11; //Output pin injector 4 is on
|
|
pinCoil1 = 28; //Pin for coil 1
|
|
pinCoil2 = 24; //Pin for coil 2
|
|
pinCoil3 = 40; //Pin for coil 3
|
|
pinCoil4 = 36; //Pin for coil 4
|
|
pinTrigger = 18; //The CAS pin
|
|
pinTrigger2 = 19; //The Cam Sensor pin
|
|
pinTPS = A2;//TPS input pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinO2 = A8; //O2 Sensor pin
|
|
pinBat = A4; //Battery reference voltage pin
|
|
pinDisplayReset = 48; // OLED reset pin
|
|
pinTachOut = 49; //Tacho output pin
|
|
break;
|
|
|
|
case 10:
|
|
//Pin mappings for user turtanas PCB
|
|
pinInjector1 = 4; //Output pin injector 1 is on
|
|
pinInjector2 = 5; //Output pin injector 2 is on
|
|
pinInjector3 = 6; //Output pin injector 3 is on
|
|
pinInjector4 = 7; //Output pin injector 4 is on
|
|
pinInjector5 = 8; //Placeholder only - NOT USED
|
|
pinInjector6 = 9; //Placeholder only - NOT USED
|
|
pinInjector7 = 10; //Placeholder only - NOT USED
|
|
pinInjector8 = 11; //Placeholder only - NOT USED
|
|
pinCoil1 = 24; //Pin for coil 1
|
|
pinCoil2 = 28; //Pin for coil 2
|
|
pinCoil3 = 36; //Pin for coil 3
|
|
pinCoil4 = 40; //Pin for coil 4
|
|
pinTrigger = 18; //The CAS pin
|
|
pinTrigger2 = 19; //The Cam Sensor pin
|
|
pinTPS = A2;//TPS input pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinMAP2 = A8; //MAP2 sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinO2 = A4; //O2 Sensor pin
|
|
pinBat = A7; //Battery reference voltage pin
|
|
pinDisplayReset = 48; // OLED reset pin
|
|
pinSpareTemp1 = A6;
|
|
pinSpareTemp2 = A5;
|
|
pinTachOut = 5; //Tacho output pin transistori puuttuu 2n2222 tähän ja 1k 12v
|
|
pinFuelPump = 7; //Fuel pump output 2n2222
|
|
break;
|
|
|
|
case 20:
|
|
//Pin mappings as per the Plazomat In/Out shields Rev 0.1
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 10; //Output pin injector 3 is on
|
|
pinInjector4 = 11; //Output pin injector 4 is on
|
|
pinCoil1 = 28; //Pin for coil 1
|
|
pinCoil2 = 24; //Pin for coil 2
|
|
pinCoil3 = 40; //Pin for coil 3
|
|
pinCoil4 = 36; //Pin for coil 4
|
|
pinSpareOut1 = 4; //Spare LSD Output 1(PWM)
|
|
pinSpareOut2 = 5; //Spare LSD Output 2(PWM)
|
|
pinSpareOut3 = 6; //Spare LSD Output 3(PWM)
|
|
pinSpareOut4 = 7; //Spare LSD Output 4(PWM)
|
|
pinSpareOut5 = 50; //Spare LSD Output 5(digital)
|
|
pinSpareOut6 = 52; //Spare LSD Output 6(digital)
|
|
pinTrigger = 20; //The CAS pin
|
|
pinTrigger2 = 21; //The Cam Sensor pin
|
|
pinSpareTemp2 = A15; //spare Analog input 2
|
|
pinSpareTemp1 = A14; //spare Analog input 1
|
|
pinO2 = A8; //O2 Sensor pin
|
|
pinBat = A4; //Battery reference voltage pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinTPS = A2;//TPS input pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
|
|
default:
|
|
//Pin mappings as per the v0.2 shield
|
|
pinInjector1 = 8; //Output pin injector 1 is on
|
|
pinInjector2 = 9; //Output pin injector 2 is on
|
|
pinInjector3 = 10; //Output pin injector 3 is on
|
|
pinInjector4 = 11; //Output pin injector 4 is on
|
|
pinCoil1 = 28; //Pin for coil 1
|
|
pinCoil2 = 24; //Pin for coil 2
|
|
pinCoil3 = 40; //Pin for coil 3
|
|
pinCoil4 = 36; //Pin for coil 4
|
|
pinTrigger = 20; //The CAS pin
|
|
pinTrigger2 = 21; //The Cam Sensor pin
|
|
pinTPS = A2; //TPS input pin
|
|
pinMAP = A3; //MAP sensor pin
|
|
pinIAT = A0; //IAT sensor pin
|
|
pinCLT = A1; //CLS sensor pin
|
|
pinO2 = A8; //O2 Sensor pin
|
|
pinBat = A4; //Battery reference voltage pin
|
|
pinDisplayReset = 48; // OLED reset pin
|
|
break;
|
|
}
|
|
|
|
//Finally, set the relevant pin modes for outputs
|
|
pinMode(pinCoil1, OUTPUT);
|
|
pinMode(pinCoil2, OUTPUT);
|
|
pinMode(pinCoil3, OUTPUT);
|
|
pinMode(pinCoil4, OUTPUT);
|
|
pinMode(pinInjector1, OUTPUT);
|
|
pinMode(pinInjector2, OUTPUT);
|
|
pinMode(pinInjector3, OUTPUT);
|
|
pinMode(pinInjector4, OUTPUT);
|
|
pinMode(pinTachOut, OUTPUT);
|
|
pinMode(pinIdle1, OUTPUT);
|
|
pinMode(pinIdle2, OUTPUT);
|
|
pinMode(pinFuelPump, OUTPUT);
|
|
|
|
//And for inputs
|
|
pinMode(pinMAP, INPUT);
|
|
pinMode(pinO2, INPUT);
|
|
pinMode(pinTPS, INPUT);
|
|
pinMode(pinIAT, INPUT);
|
|
pinMode(pinCLT, INPUT);
|
|
|
|
//
|
|
digitalWrite(pinMAP, HIGH);
|
|
//digitalWrite(pinO2, LOW);
|
|
digitalWrite(pinTPS, LOW);
|
|
}
|
|
|
|
/*
|
|
This function retuns a pulsewidth time (in us) using a either Alpha-N or Speed Density algorithms, given the following:
|
|
REQ_FUEL
|
|
VE: Lookup from the main MAP vs RPM fuel table
|
|
MAP: In KPa, read from the sensor
|
|
GammaE: Sum of Enrichment factors (Cold start, acceleration). This is a multiplication factor (Eg to add 10%, this should be 110)
|
|
injDT: Injector dead time. The time the injector take to open minus the time it takes to close (Both in uS)
|
|
TPS: Throttle position (0% to 100%)
|
|
|
|
This function is called by PW_SD and PW_AN for speed0density and pure Alpha-N calculations respectively.
|
|
*/
|
|
unsigned int PW(int REQ_FUEL, byte VE, byte MAP, int corrections, int injOpen, byte TPS)
|
|
{
|
|
//Standard float version of the calculation
|
|
//return (REQ_FUEL * (float)(VE/100.0) * (float)(MAP/100.0) * (float)(TPS/100.0) * (float)(corrections/100.0) + injOpen);
|
|
//Note: The MAP and TPS portions are currently disabled, we use VE and corrections only
|
|
|
|
//100% float free version, does sacrifice a little bit of accuracy.
|
|
int iVE = ((int)VE << 7) / 100;
|
|
//int iVE = divs100( ((int)VE << 7));
|
|
//int iMAP = ((int)MAP << 7) / 100;
|
|
int iCorrections = (corrections << 7) / 100;
|
|
//int iTPS = ((int)TPS << 7) / 100;
|
|
|
|
unsigned long intermediate = ((long)REQ_FUEL * (long)iVE) >>7; //Need to use an intermediate value to avoid overflowing the long
|
|
//intermediate = (intermediate * iMAP) >> 7;
|
|
intermediate = (intermediate * iCorrections) >> 7;
|
|
//intermediate = (intermediate * iTPS) >> 7;
|
|
intermediate += injOpen; //Add the injector opening time
|
|
if ( intermediate > 65535) { intermediate = 65535; } //Make sure this won't overflow when we convert to uInt. This means the maximum pulsewidth possible is 65.535mS
|
|
return (unsigned int)(intermediate);
|
|
|
|
}
|
|
|
|
//Convenience functions for Speed Density and Alpha-N
|
|
unsigned int PW_SD(int REQ_FUEL, byte VE, byte MAP, int corrections, int injOpen)
|
|
{
|
|
//return PW(REQ_FUEL, VE, MAP, corrections, injOpen, 100); //Just use 1 in place of the TPS
|
|
return PW(REQ_FUEL, VE, 100, corrections, injOpen, 100); //Just use 1 in place of the TPS
|
|
}
|
|
|
|
unsigned int PW_AN(int REQ_FUEL, byte VE, byte TPS, int corrections, int injOpen)
|
|
{
|
|
//Sanity check
|
|
if(TPS > 100) { TPS = 100; }
|
|
//return PW(REQ_FUEL, VE, 100, corrections, injOpen, TPS); //Just use 1 in place of the MAP
|
|
return PW(REQ_FUEL, VE, 100, corrections, injOpen, 100); //Just use 1 in place of the MAP
|
|
}
|