2015-02-02 22:25:43 -08:00
;-------------------------------------------------------------------------------
[MegaTune]
MTversion = 2.25 ; MegaTune itself; needs to match exec version.
queryCommand = "Q"
signature = 20
;-------------------------------------------------------------------------------
[Constants]
;----------------------------------------------------------------------------
; Constants Definition
; --------------------
;
; Scalar Values
; -------------
; The scaling and translation values are used as follows:
; msValue = userValue / scale - translate
; userValue = (msValue + translate) * scale
;
;
; Temperatures are fine, check out the Fielding IAC example (fastIdleT).
;
; Array Values
; ------------
; Arrays are specified just like scalars, except that they have a "shape"
; entry in the fourth parameter. The shape allows you to define lists or
; tables, for example [8] defines a list with eight values and [2x4] defines
; a table with eight values (two rows and four columns). Tables may be
; stored in either "X-" or "Y-order." X-order means that memory is layed
; out like.
;
; [x1,y1] [x2,y1]...[xn,y1] [x1,y2]...
;
; Y-order would be
;
; [x1,y1] [x1,y2]...[x1,yn] [x2,y1]...
;
; To use the TableEditor, you must define two lists and a table, and
; the lengths of the lists must correspond to the shape of the table.
;
; Bit Fields
; ----------
; Bits are numbered 0-7, the rightmost being bit zero. The basic
; data word that stores bit fields must be unsigned.
;
; You need NOT supply the correct number of labels matching the
; number of bits you've specified (one bit requires 2 values, two
; bits requires 4 values and so on). If you neglect to supply enough
; labels, they will be synthesized using the sequence "1", "2" and so
; on based upon their position in the sequence (the cltType and matType
; will end up with identical lists).
;
; If you specify a label as "INVALID" (all upper case), then it will
; not be displayed in the combo box, so you can leave out values that
; make no sense.
;
;----------------------------------------------------------------------------
2015-05-16 05:06:05 -07:00
endianness = little
2015-09-24 13:24:40 -07:00
nPages = 8
2015-02-02 22:25:43 -08:00
burnCommand = "B"
2016-02-28 23:26:37 -08:00
blockReadTimeout = 500
2015-09-24 13:24:40 -07:00
pageSize = 288, 64, 288, 64, 288, 64, 64, 160
2015-02-02 22:25:43 -08:00
pageActivationDelay = 10
; pageActivate = ""
2015-09-28 04:57:27 -07:00
pageActivate = "P\001", "P\002", "P\003", "P\004", "P\005", "P\006", "P\007", "P\010"
2015-09-24 13:24:40 -07:00
pageReadCommand = "V", "V", "V", "V", "V", "V", "V", "V"
pageValueWrite = "W%2o%v", "W%o%v", "W%2o%v", "W%o%v", "W%2o%v", "W%o%v", "W%o%v", "W%o%v"
2015-06-05 00:28:31 -07:00
;\x00%2
2015-02-02 22:25:43 -08:00
; pageChunkWrite = "" ; No chunk write for standard MS
2015-06-05 00:28:31 -07:00
;Page 1 is the fuel map and axis bins only
2015-02-02 22:25:43 -08:00
page = 1
; name = bits, type, offset, bits
; name = array, type, offset, shape, units, scale, translate, lo, hi, digits
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
2015-06-05 00:28:31 -07:00
veTable = array, U08, 0, [16x16],"%", 1.0, 0.0, 0.0, 255.0, 0
rpmBins = array, U08, 256, [ 16], "RPM", 100.0, 0.0, 100.0, 25500.0, 0
2015-02-02 22:25:43 -08:00
#if SPEED_DENSITY
2015-06-05 00:28:31 -07:00
mapBins = array, U08, 272, [ 16], "kPa", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif ALPHA_N
2015-06-05 00:28:31 -07:00
tpsBins = array, U08, 272, [ 16], "TPS", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif AIR_FLOW_METER
2015-04-21 23:49:10 -07:00
#error "Speeduino does not support MAF"
2015-02-02 22:25:43 -08:00
;#exit
#endif
2015-06-05 00:28:31 -07:00
;--------------------------------------------------
;Start Page 2
;Page 2 is all general settings (Previously part of page 1)
;--------------------------------------------------
page = 2
2015-12-15 02:10:30 -08:00
unused2-1 = scalar, U08, 0, "ms", 0.1, 0.0, 0.0, 25.5, 1
unused2-2 = scalar, U08, 1, "ms", 0.1, 0.0, 0.0, 25.5, 1
2015-06-05 00:28:31 -07:00
asePct = scalar, U08, 2, "%", 1.0, 0.0, 0.0, 95.0, 0
aseCount = scalar, U08, 3, "s", 1.0, 0.0, 0.0, 255, 0
wueBins = array, U08, 4, [ 10], "%", 1.0, 0.0, 0.0, 255, 0
crankingPct = scalar, U08, 14, "%", 1.0, 0.0, 0.0, 255, 0
2015-09-13 16:16:46 -07:00
pinLayout = bits, U08, 15, [0:7], "Speeduino v0.1", "Speeduino v0.2", "Speeduino v0.3", "Speeduino v0.4", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Turtana PCB", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Plazomat I/O 0.1", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Daz V6 Shield 0.1", "INVALID", "INVALID"
2015-06-09 06:32:00 -07:00
unused16 = scalar, U08, 16, "ms", 0.1, 0.0, 0.0, 25.5, 1
2015-06-05 00:28:31 -07:00
tdePct = scalar, U08, 17, "ms", 0.1, 0.0, 0.0, 25.5, 1
taeColdA = scalar, U08, 18, "ms", 0.1, 0.0, 0.0, 25.5, 1
tpsThresh = scalar, U08, 19, "%/s", 1.0, 0.0, 0.0, 255, 0
taeTime = scalar, U08, 20, "ms", 10, 0.0, 0.0, 2550, 0
2015-02-28 13:27:16 -08:00
; Display (Options for what the display is showing)
2015-06-05 00:28:31 -07:00
display = bits, U08, 21, [0:2], "Unused", "Adafruit 128x32", "Generic 128x32", "Adafruit 128x64", "Generic 128x64", "INVALID", "INVALID", "INVALID"
display1 = bits U08, 21, [3:5], "RPM", "PW", "Advance", "VE", "GammaE", "TPS", "IAT", "CLT"
display2 = bits U08, 21, [6:7], "O2", "Voltage", "CPU", "Mem"
2015-02-28 13:27:16 -08:00
2015-06-05 00:28:31 -07:00
display3 = bits U08, 22, [0:2], "RPM", "PW", "Advance", "VE", "GammaE", "TPS", "IAT", "CLT"
display4 = bits U08, 22, [3:4], "O2", "Voltage", "CPU", "Mem"
display5 = bits U08, 22, [5:7], "RPM", "PW", "Advance", "VE", "GammaE", "TPS", "IAT", "CLT"
2015-02-28 13:27:16 -08:00
2015-06-05 00:28:31 -07:00
displayB1 = bits U08, 23, [0:3], "RPM", "PW", "Advance", "VE", "GammaE", "TPS", "IAT", "CLT"
displayB2 = bits U08, 23, [4:7], "RPM", "PW", "Advance", "VE", "GammaE", "TPS", "IAT", "CLT"
2015-03-19 21:13:16 -07:00
2015-06-05 00:28:31 -07:00
reqFuel = scalar, U08, 24, "ms", 0.1, 0.0, 0.0, 25.5, 1
divider = scalar, U08, 25, "", 1.0, 0.0
2016-02-24 18:11:13 -08:00
;injTiming = bits, U08, 26, [0:1], "Simultaneous", "Semi-Sequential", "Sequential"
2016-02-29 03:23:09 -08:00
alternate = bits, U08, 26, [0:0], "Simultaneous", "Alternating"
2015-06-05 00:28:31 -07:00
injOpen = scalar, U08, 27, "ms", 0.1, 0.0, 0.1, 25.5, 1
inj1Ang = scalar, U16, 28, "deg", 1.0, 0.0, 0.0, 360, 0
inj2Ang = scalar, U16, 30, "deg", 1.0, 0.0, 0.0, 360, 0
inj3Ang = scalar, U16, 32, "deg", 1.0, 0.0, 0.0, 360, 0
inj4Ang = scalar, U16, 34, "deg", 1.0, 0.0, 0.0, 360, 0
2015-02-02 22:25:43 -08:00
; Config1
2015-10-08 18:42:09 -07:00
mapSample = bits, U08, 36, [0:1], "Instantaneous", "Cycle Average", "Cycle Minimum", "INVALID"
2015-06-05 00:28:31 -07:00
twoStroke = bits, U08, 36, [2:2], "Four-stroke", "Two-stroke"
injType = bits, U08, 36, [3:3], "Port", "Throttle Body"
nCylinders = bits, U08, 36, [4:8], "INVALID","1","2","3","4","INVALID","6","INVALID","8","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID"
2015-02-02 22:25:43 -08:00
; Config2
2015-06-05 00:28:31 -07:00
cltType = bits, U08, 37, [0:1], "GM", "Unknown1", "Unknown2", "Unknown3"
matType = bits, U08, 37, [2:3], "GM", "Unknown1", "Unknown2", "Unknown3"
nInjectors = bits, U08, 37, [4:7+1]
2015-02-02 22:25:43 -08:00
; Config3
2015-06-05 00:28:31 -07:00
engineType = bits, U08, 38, [0:0], "Even fire", "Odd fire"
2015-12-14 22:11:33 -08:00
egoTypeOLD = bits, U08, 38, [1:1], "Narrow band", "Wide band"
2015-06-05 00:28:31 -07:00
algorithm = bits, U08, 38, [2:2], "Speed Density", "Alpha-N"
baroCorr = bits, U08, 38, [3:3], "Off", "On"
2016-01-04 13:00:47 -08:00
injLayout = bits, U08, 38, [4:5], "Bank", "Semi-Sequential", "INVALID", "INVALID"
2015-02-02 22:25:43 -08:00
2015-06-05 00:28:31 -07:00
primePulse = scalar, U08, 39, "ms", 0.1, 0.0, 0.0, 25.5, 1
2015-06-11 20:18:36 -07:00
dutyLim = scalar, U08, 40, "%", 1.0, 0.0, 0.0, 100.0, 0
2015-06-05 00:28:31 -07:00
unused41 = scalar, U08, 41, "RPM", 100.0, 0.0, 100, 25500, 0
egoSwitch = scalar, U08, 42, "v", 0.0196, 0.0, 0.0, 5.0, 3
taeColdM = scalar, U08, 43, "%", 1.0, 0.0, 0.0, 250.0, 0
tpsMin = scalar, U08, 44, "ADC", 1.0, 0.0, 0.0, 255.0, 0
tpsMax = scalar, U08, 45, "ADC", 1.0, 0.0, 0.0, 255.0, 0
2015-09-16 05:23:06 -07:00
mapMin = scalar, U08, 46, "kpa", 1.0, 0.0, 0.0, 255.0, 0
mapMax = scalar, U16, 47, "kpa", 1.0, 0.0, 0.0, 25500, 0
2015-12-20 20:45:52 -08:00
fpPrime = scalar, U08, 49, "s", 1.0, 0.0, 0.0, 255.0, 0
2015-12-14 22:11:33 -08:00
unused2-50 = scalar, U08, 50, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-51 = scalar, U08, 51, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-52 = scalar, U08, 52, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-53 = scalar, U08, 53, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-54 = scalar, U08, 54, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-55 = scalar, U08, 55, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-56 = scalar, U08, 56, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-57 = scalar, U08, 57, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-58 = scalar, U08, 58, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused2-63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
2015-02-02 22:25:43 -08:00
;--------------------------------------------------
2015-06-05 00:28:31 -07:00
;Start Ignition table (Page 3)
;--------------------------------------------------
page = 3
advTable1 = array, U08, 0,[16x16], "deg", 1.0, 0.0, 0.0, 255.0, 0
rpmBins2 = array, U08, 256,[ 16], "RPM", 100.0, 0.0, 100, 25500, 0
2015-02-02 22:25:43 -08:00
#if SPEED_DENSITY
2015-06-05 00:28:31 -07:00
mapBins2 = array, U08, 272, [ 16], "kPa", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif ALPHA_N
2015-06-05 00:28:31 -07:00
tpsBins2 = array, U08, 272, [ 16], "TPS", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif AIR_FLOW_METER
#error "Speeduino does not support MAF"
#exit
#endif
2015-06-05 00:28:31 -07:00
;--------------------------------------------------
;Start Page 4
;These are primarily ignition related settings (Previously part of page 2)
;--------------------------------------------------
page = 4
2015-08-16 01:00:24 -07:00
TrigAng = scalar, S16, 0, "Deg", 1, 0, -360, 360, 0
2015-06-05 00:28:31 -07:00
FixAng = scalar, U08, 2, "Deg", 1, 0, 0, 80, 0
2015-08-22 18:36:18 -07:00
CrankAng = scalar, U08, 3, "Deg", 1, 0, -10, 80, 0
2015-06-05 00:28:31 -07:00
IgHold = scalar, U08, 4, "", 1, 0, 0, 100, 0
TrigEdge = bits, U08, 5[0:0], "Leading", "Trailing"
TrigSpeed = bits, U08, 5[1:1], "Crank Speed", "Cam Speed"
2015-07-30 20:11:25 -07:00
IgInv = bits, U08, 5[2:2], "Going Low", "Going High"
2015-06-05 00:28:31 -07:00
oddfire = bits, U08, 5[3:3], "No", "Yes"
2016-02-29 03:23:09 -08:00
TrigPattern = bits, U08, 5[4:7], "Missing Tooth", "Basic Distributor", "Dual Wheel", "GM 7X", "4G63 / Miata", "GM 24X", "Jeep 2000", "Audi 135", "Honda D17", "Miata 99-05", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
2015-06-05 00:28:31 -07:00
IdleAdv = scalar, U08, 6, "Deg", 0.352,-28.4, -10, 80, 0
IdleAdvTPS = scalar, U08, 7, "ADC", 1, 0, 0, 255, 0
IdleAdvRPM = scalar, U08, 8, "RPM", 100, 0, 0, 1200, 0
2015-02-02 22:25:43 -08:00
#if CELSIUS
2015-12-14 17:48:59 -08:00
IdleAdvCLT = scalar, U08, 9, "C", 1, -40, -40, 102, 1
2015-02-02 22:25:43 -08:00
#else
2015-12-14 17:48:59 -08:00
IdleAdvCLT = scalar, U08, 9, "F", 0.555, -8, -40, 215, 0
2015-02-02 22:25:43 -08:00
#endif
2015-06-05 00:28:31 -07:00
IdleDelayTime = scalar, U08, 10, "sec", 1, 0, 0, 5, 0
StgCycles = scalar, U08, 11, "cycles", 1, 0, 0, 255, 0
2015-02-02 22:25:43 -08:00
; name = array, type, offset, shape, units, scale, translate, lo, hi, digits
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
;Dwell control
2015-03-19 21:13:16 -07:00
;running dwell variable railed to 8 - who needs more than 8ms?
2015-10-17 04:23:34 -07:00
dwellcont = bits, U08, 12, [0:0], "INVALID", "Dwell control"
2015-09-07 18:17:47 -07:00
useDwellLim = bits, U08, 12, [1:1], "Off", "On"
2016-02-17 20:00:16 -08:00
sparkMode = bits, U08, 12, [2:3], "Wasted Spark", "Single Channel", "Wasted COP", "Sequential"
2016-02-24 18:11:13 -08:00
dfcoEnabled = bits, U08, 12, [4:4], "Off", "On"
2015-10-17 04:23:34 -07:00
dwellcrank = scalar, U08, 13, "ms", 0.1, 0, 0, 25, 1
dwellrun = scalar, U08, 14, "ms", 0.1, 0, 0, 8, 1
numteeth = scalar, U08, 15, "teeth", 1.0, 0.0, 0.0, 255, 0
onetwo = scalar, U08, 16, "teeth", 1.0, 0.0, 0.0, 255, 0
2015-02-02 22:25:43 -08:00
2015-10-17 04:23:34 -07:00
crankRPM = scalar, U08, 17, "rpm", 100, 0.0, 100, 1000, 0
tpsflood = scalar, U08, 18, "%", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
;Rev Limits
2015-10-17 04:23:34 -07:00
SoftRevLim = scalar, U08, 19, "rpm", 100, 0.0, 100, 25500, 0
SoftLimRetard = scalar, U08, 20, "deg", 1.0, 0.0, 0.0, 80, 0
SoftLimMax = scalar, U08, 21, "s", 0.1, 0.0, 0.0, 25.5, 1
HardRevLim = scalar, U08, 22, "rpm", 100, 0.0, 100, 25500, 0
2015-02-02 22:25:43 -08:00
;TPS based acceleration enrichment
2015-10-17 04:23:34 -07:00
taeBins = array, U08, 23, [ 4], "%/s", 10.0, 0.0, 0.00, 2550.0, 0
taeRates = array, U08, 27, [ 4], "%", 1.0, 0.0, 0.00, 255.0, 0 ; 4 bytes
wueRates = array, U08, 31, [10], "C", 1.0, 0.0, 100.0, 255.0, 0
2015-03-19 21:13:16 -07:00
;Dwell config options
2015-10-17 04:23:34 -07:00
dwellLim = scalar, U08, 41, "ms", 1, 0, 0, 32, 0
dwellRates = array, U08, 42, [6], "%", 1.0, 0.0, 0.00, 255.0, 0
2015-06-05 00:28:31 -07:00
2016-01-02 12:40:27 -08:00
;IAT (Inlet air temp) timing retard
#if CELSIUS
iatRetBins = array, U08, 48, [ 6], "C", 1.0, 0.0, 0.00, 255.0, 0
#else
iatRetBins = array, U08, 48, [ 6], "F", 1.0, 0.0, 0.00, 255.0, 0
#endif
iatRetRates = array, U08, 54, [ 6], "deg", 1.0, 0.0, 0.00, 255.0, 0
2016-02-24 18:11:13 -08:00
;Decelleration Fuel Cut Off (DFCO)
dfcoRPM = scalar, U08, 60, "RPM", 10.0, 0.0, 100, 2550, 0
dfcoHyster = scalar, U08, 61, "RPM", 1.0, 0.0, 100, 255.0, 0
2016-02-29 03:23:09 -08:00
dfcoTPSThresh = scalar, U08, 62, "%", 1.0, 0.0, 0, 100.0, 0
2015-12-14 22:11:33 -08:00
unused4-63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
2015-02-02 22:25:43 -08:00
;--------------------------------------------------
2015-06-05 00:28:31 -07:00
;Start AFR page
2015-02-02 22:25:43 -08:00
;--------------------------------------------------
2015-06-05 00:28:31 -07:00
page = 5
afrTable = array, U08, 0,[16x16], "AFR", 0.1, 0.0, 7, 25.5, 1
rpmBinsAFR = array, U08, 256,[ 16], "RPM", 100.0, 0.0, 100, 25500, 0
2015-02-02 22:25:43 -08:00
#if SPEED_DENSITY
2015-06-05 00:28:31 -07:00
mapBinsAFR = array, U08, 272,[ 16], "kPa", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif ALPHA_N
2015-06-05 00:28:31 -07:00
tpsBinsAFR = array, U08, 272,[ 16], "TPS", 1.0, 0.0, 0.0, 255.0, 0
2015-02-02 22:25:43 -08:00
#elif AIR_FLOW_METER
#error "Speeduino does not support MAF"
#exit
#endif
2015-06-05 00:28:31 -07:00
;--------------------------------------------------
;Start page 6
; Page 6 is all settings associated with O2/AFR
;--------------------------------------------------
page = 6
egoAlgorithm = bits , U08, 0, [0:1], "Simple", "INVALID", "PID", "No correction" ; * ( 1 byte)
egoType = bits , U08, 0, [2:3], "Disabled", "Narrow Band", "Wide Band", "INVALID" ; egoOption
2015-09-26 16:14:29 -07:00
boostEnabled = bits, U08, 0, [4:4], "Off", "On"
vvtEnabled = bits, U08, 0, [5:5], "Off", "On"
2015-12-14 22:11:33 -08:00
unused = bits, U08, 0, [6:7], "Off", "On/Off", "PWM","Centred PID"
2015-06-05 00:28:31 -07:00
egoKP = scalar, U08, 1, "%", 1.0, 0.0, 0.0, 200.0, 0 ; * ( 1 byte)
egoKI = scalar, U08, 2, "%", 1.0, 0.0, 0.0, 200.0, 0 ; * ( 1 byte)
egoKD = scalar, U08, 3, "%", 1.0, 0.0, 0.0, 200.0, 0 ; * ( 1 byte)
2015-02-02 23:01:18 -08:00
#if CELSIUS
2015-06-05 00:28:31 -07:00
egoTemp = scalar, U08, 4, "<22> C", 0.555, -72, -40, 102.0, 0
2015-02-02 23:01:18 -08:00
#else
2015-06-05 00:28:31 -07:00
egoTemp = scalar, U08, 4, "<22> F", 1.0, -40, -40, 215.0, 0
2015-02-02 23:01:18 -08:00
#endif
2015-09-26 16:14:29 -07:00
egoCount = scalar, U08, 5, "", 4.0, 0.0, 4.0, 255.0, 0 ; * ( 1 byte)
egoDelta = scalar, U08, 6, "%", 1.0, 0.0, 0.0, 255.0, 0 ; * ( 1 byte)
egoLimit = scalar, U08, 7, "", 1, 0, 0, 16, 0
ego_min = scalar, U08, 8, "AFR", 0.1, 0.0, 7, 25, 1
ego_max = scalar, U08, 9, "AFR", 0.1, 0.0, 7, 25, 1
ego_sdelay = scalar, U08, 10, "sec", 1, 0, 0, 120, 0
egoRPM = scalar, U08, 11, "rpm", 100, 0.0, 100, 25500, 0
egoTPSMax = scalar, U08, 12, "%", 1, 0, 0, 120, 0
egoLoadMax = scalar, U08, 13, "%", 1, 0, 0, 120, 0
egoLoadMin = scalar, U08, 14, "%", 1, 0, 0, 120, 0
brvBins = array, U08, 15, [6], "V", 0.1, 0, 6, 24, 1 ; Bins for the battery reference voltage
injBatRates = array, U08, 21, [6], "%", 1, 0, 0, 255, 0 ;Values for injector pulsewidth vs voltage
airDenBins = array, U08, 27, [9], "C", 1.0, -40, -40, 215, 0 ; Bins for the air density correction curve
airDenRates = array, U08, 36, [9], "%", 1.0, 0.0, 0, 255, 0 ; Values for the air density correction curve
2015-10-17 04:23:34 -07:00
; PWM Frequencies
boostFreq = scalar, U08, 45, "Hz", 2.0, 0.0, 10, 511, 0
vvtFreq = scalar, U08, 46, "Hz", 2.0, 0.0, 10, 511, 0
idleFreq = scalar, U08, 47, "Hz", 2.0, 0.0, 10, 511, 0
; Launch Control
launchPin = bits , U08, 48, [0:5], "Board Default", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "51", "52", "53", "54", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
launchEnable = bits, U08, 48, [6:6], "No", "Yes"
unused48h = bits, U08, 48, [7:7], "No", "Yes"
lnchSoftLim = scalar, U08, 49, "rpm", 100, 0.0, 100, 25500, 0
lnchRetard = scalar, U08, 50, "deg", 1.0, 0.0, 0.0, 80, 0
lnchHardLim = scalar, U08, 51, "rpm", 100, 0.0, 100, 25500, 0
lnchFuelAdd = scalar, U08, 52, "%", 1.0, 0.0, 0.0, 80, 0
2015-12-14 22:11:33 -08:00
unused6-53 = scalar, U08, 53, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-54 = scalar, U08, 54, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-55 = scalar, U08, 55, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-56 = scalar, U08, 56, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-57 = scalar, U08, 57, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-58 = scalar, U08, 58, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused6-63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
2015-06-02 05:30:53 -07:00
;--------------------------------------------------
2015-07-23 21:40:24 -07:00
;Start idle and fan controls (Page 7)
2015-06-02 05:30:53 -07:00
;--------------------------------------------------
2015-06-05 00:28:31 -07:00
page = 7
2015-08-25 20:27:50 -07:00
iacCLValues = array, U08, 0, [10], "RPM", 1.0, 0.0, 100.0, 255, 0
iacOLStepVal = array, U08, 10, [10], "Steps", 3, 0, 0, 765, 0
2015-06-02 05:30:53 -07:00
iacOLPWMVal = array, U08, 20, [10], "Duty %", 1.0, 0, 0, 100, 0
iacBins = array, U08, 30, [10], "C", 1.0, -40, -40, 215, 0
2015-08-25 20:27:50 -07:00
iacCrankSteps = array, U08, 40, [4], "Steps", 3, 0, 0, 765, 0
2015-06-02 05:30:53 -07:00
iacCrankDuty = array, U08, 44, [4], "Duty %", 1.0, 0, 0, 100, 0
iacCrankBins = array, U08, 48, [4], "C", 1.0, -40, -40, 215, 0
2015-08-25 04:52:05 -07:00
iacAlgorithm = bits , U08, 52, [0:2], "None", "On/Off", "PWM", "INVALID", "Stepper", "INVALID", "INVALID", "INVALID"
2015-06-02 05:30:53 -07:00
iacStepTime = bits , U08, 52, [3:5], "1", "2", "3", "4", "5", "6"
2016-01-12 22:06:55 -08:00
iacChannels = bits, U08, 52, [6:6], "1", "2"
unused7-52f = bits , U08, 52, [7:7], "One", "INVALID"
2015-06-02 05:30:53 -07:00
#if CELSIUS
iacFastTemp = scalar, U08, 53, "C", 1.0, -40, -40, 215, 0
#else
2015-12-14 17:48:59 -08:00
iacFastTemp = scalar, U08, 53, "F", 1.8, -4.44, -40, 215, 0
2015-06-02 05:30:53 -07:00
#endif
2015-08-25 20:27:50 -07:00
iacStepHome = scalar, U08, 54, "Steps", 3, 0, 0, 765, 0
iacStepHyster = scalar, U08, 55, "Steps", 1, 0.0, 0.0, 10, 0
2015-06-02 05:30:53 -07:00
2015-07-23 21:40:24 -07:00
; Begin fan control vairables
2015-08-25 20:27:50 -07:00
fanInv = bits, U08, 56, [0:0], "No", "Yes"
fanEnable = bits, U08, 56, [1:1], "No", "Yes"
2015-12-14 22:11:33 -08:00
unused7-55a = bits, U08, 56, [2:2], "No", "Yes"
unused7-55b = bits, U08, 56, [3:3], "No", "Yes"
unused7-55c = bits, U08, 56, [4:4], "No", "Yes"
unused7-55d = bits, U08, 56, [5:5], "No", "Yes"
unused7-55e = bits, U08, 56, [6:6], "No", "Yes"
unused7-55f = bits, U08, 56, [7:7], "No", "Yes"
2015-07-23 21:40:24 -07:00
#if CELSIUS
2015-08-25 20:27:50 -07:00
fanSP = scalar, U08, 57, "<22> C", 1.0, -40, -40, 215.0, 0
fanHyster = scalar, U08, 58, "<22> C", 1.0, -40, -40, 215.0, 0
2015-07-23 21:40:24 -07:00
#else
2015-08-25 20:27:50 -07:00
fanSP = scalar, U08, 57, "<22> F", 1.0, -40, -40, 215.0, 0
fanHyster = scalar, U08, 58, "<22> F", 1.0, -40, -40, 215.0, 0
2015-07-23 21:40:24 -07:00
#endif
2015-12-14 22:11:33 -08:00
unused7-59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused7-60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused7-61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused7-62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused7-63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
2015-09-24 13:24:40 -07:00
;--------------------------------------------------
;Boost and vvt maps (Page 8)
;--------------------------------------------------
page = 8
boostTable = array, U08, 0,[8x8], "%", 1.0, 0.0, 0, 100, 0
rpmBinsBoost = array, U08, 64,[ 8], "RPM", 100.0, 0.0, 100, 25500, 0
tpsBinsBoost = array, U08, 72,[ 8], "TPS", 1.0, 0.0, 0.0, 255.0, 0
vvtTable = array, U08, 80,[8x8], "%", 1.0, 0.0, 0, 100, 0
rpmBinsVVT = array, U08, 144,[ 8], "RPM", 100.0, 0.0, 100, 25500, 0
tpsBinsVVT = array, U08, 152,[ 8], "TPS", 1.0, 0.0, 0.0, 255.0, 0
2015-06-02 05:30:53 -07:00
2015-02-02 22:25:43 -08:00
;-------------------------------------------------------------------------------
2015-03-15 04:54:47 -07:00
[ConstantsExtensions]
requiresPowerCycle = nCylinders
requiresPowerCycle = pinLayout
2015-05-05 16:22:02 -07:00
requiresPowerCycle = reqFuel
requiresPowerCycle = numteeth
requiresPowerCycle = onetwo
requiresPowerCycle = injOpen
requiresPowerCycle = IgInv
2015-07-23 21:40:24 -07:00
requiresPowerCycle = fanInv
2015-08-21 00:20:56 -07:00
requiresPowerCycle = iacAlgorithm
2015-09-26 16:14:29 -07:00
requiresPowerCycle = boostEnabled
requiresPowerCycle = vvtEnabled
2015-10-17 15:18:53 -07:00
; requiresPowerCycle = vvtChannels
2015-09-29 00:21:00 -07:00
requiresPowerCycle = boostFreq
requiresPowerCycle = vvtFreq
requiresPowerCycle = idleFreq
2015-10-28 12:13:13 -07:00
requiresPowerCycle = sparkMode
2015-03-15 04:54:47 -07:00
defaultValue = pinLayout, 1
2015-05-18 05:46:22 -07:00
defaultValue = TrigPattern, 0
2015-10-28 12:13:13 -07:00
defaultValue = sparkMode, 0
2015-05-28 07:15:27 -07:00
defaultValue = inj1Ang, 355
defaultValue = inj2Ang, 355
defaultValue = inj3Ang, 355
defaultValue = inj4Ang, 355
2015-06-11 20:18:36 -07:00
defaultValue = dutyLim, 100
2015-09-17 15:25:46 -07:00
defaultValue = mapMin, 10
defaultValue = mapMax, 260
2015-12-21 20:30:00 -08:00
defaultValue = fpPrime, 3
2015-03-15 04:54:47 -07:00
2015-02-02 22:25:43 -08:00
[Menu]
;----------------------------------------------------------------------------
; There are five pre-defined values that may be used to define your menus.
; The first four allow access to the "standard" dialog boxes, the last one
; merely draws a separator (horizontal line) in the menu.
;
; std_constants
; std_enrichments
; std_realtime
; std_warmup
;
; std_separator
;
; If you use any of the std_constants, std_enrichments or std_warmup
; editors, they may be optionally suffixed with a page number (only
; useful for multi-page code variants), which causes them to edit the
; specified page. If you leave off the page specifier, they edit logical
; page one as specified in the Constants section.
;
; There are four special menu names, which when used append to the standard
; menus of the same name instead of creating a new one. The menu names
; are "File", "Communications", "Tools" and "Help".
;
;----------------------------------------------------------------------------
menu = "&Settings"
2015-03-15 04:54:47 -07:00
;subMenu = std_injection, "&Constants"
subMenu = engine_constants, "Engine Constants"
2015-02-28 13:27:16 -08:00
subMenu = injChars, "Injector Characteristics"
2015-02-02 22:25:43 -08:00
subMenu = triggerSettings, "&Trigger Setup"
2015-09-17 16:41:10 -07:00
;subMenu = OLED, "OLED Setup"
2015-04-21 23:49:10 -07:00
subMenu = airdensity_curve, "IAT Density"
2015-09-27 05:51:10 -07:00
2015-02-02 22:25:43 -08:00
menu = "&Tuning"
subMenu = std_realtime, "&Realtime Display"
subMenu = accelEnrichments, "&Acceleration Wizard"
subMenu = egoControl, "AFR/O2", 3
subMenu = RevLimiterS, "Rev Limits", 2
2015-02-02 23:01:18 -08:00
subMenu = veTable1Tbl, "&VE Table", 0
2015-06-05 00:28:31 -07:00
subMenu = sparkTbl, "&Spark Table", 2
subMenu = afrTable1Tbl, "A&FR Table", 5
2015-02-02 22:25:43 -08:00
menu = "&Spark"
subMenu = sparkSettings, "&Spark Settings"
2015-06-09 06:32:00 -07:00
subMenu = sparkTbl, "Spark Table", 2
2015-02-02 22:25:43 -08:00
;subMenu = IdleAdvance, "Idle Advance settings",
;subMenu = Knock, "Kn&ock System"
subMenu = dwellSettings, "Dwell settings"
2015-03-19 21:13:16 -07:00
subMenu = dwell_correction_curve, "Dwell Compensation"
2016-01-02 12:40:27 -08:00
subMenu = iat_retard_curve, "&IAT Retard"
2015-02-02 22:25:43 -08:00
;subMenu = wheelsim, "Stim for wheel"
;subMenu = oddwheel, "Oddfire Wheel settings", 7, { wheelon && oddfire }
2015-06-02 05:30:53 -07:00
menu = "&Starting/Idle"
subMenu = crankPW, "Cranking Settings"
subMenu = std_warmup, "&Warmup Enrichment"
subMenu = std_separator
2015-08-25 04:52:05 -07:00
subMenu = idleSettings, "Idle Control"
subMenu = iacPwm_curve, "Idle - PWM Duty Cycle", 7, { iacAlgorithm == 2 || iacAlgorithm == 3 }
subMenu = iacPwmCrank_curve, "Idle - PWM Cranking Duty Cycle", 7, { iacAlgorithm == 2 || iacAlgorithm == 3 }
subMenu = iacStep_curve, "Idle - Stepper Motor", 7, { iacAlgorithm == 4 || iacAlgorithm == 5 }
subMenu = iacStepCrank_curve, "Idle - Stepper Motor Cranking", 7, { iacAlgorithm == 4 || iacAlgorithm == 5 }
2015-09-27 05:51:10 -07:00
menu = "&Accessories"
subMenu = fanSettings, "Thermo Fan"
2015-10-17 04:23:34 -07:00
subMenu = LaunchControl, "Launch Control"
2015-09-27 05:51:10 -07:00
subMenu = std_separator
subMenu = boostSettings, "Boost Control"
subMenu = boostTbl, "Boost duty cycle", 8, { boostEnabled }
subMenu = std_separator
subMenu = vvtSettings, "VVT Control"
subMenu = vvtTbl, "VVT duty cycle", 8, { vvtEnabled }
2015-06-02 05:30:53 -07:00
2015-02-02 22:25:43 -08:00
menuDialog = main
menu = "T&ools"
2015-09-16 05:23:06 -07:00
subMenu = mapCal, "Calibrate MAP"
2015-02-02 22:25:43 -08:00
;subMenu = battcalib, "Calibrate Battery Voltage"
;subMenu = std_separator ;----------------------------------------------
;subMenu = flash_unlock, "Un/Lock calibrations"
subMenu = std_ms2gentherm, "Calibrate T&hermistor Tables", 0 ;, {flashlock}
subMenu = std_ms2geno2, "Calibrate &AFR Table", 0;, {flashlock}
2015-02-05 13:11:00 -08:00
menuDialog = main
menu = "3D &Tuning Maps"
subMenu = veTable1Map, "Fuel Table"
2015-06-05 00:28:31 -07:00
subMenu = sparkMap, "Spark Table", 3
2015-02-05 13:11:00 -08:00
subMenu = afrTable1Map, "AFR Target Table"
2015-10-17 15:18:53 -07:00
menu = "Help"
subMenu = helpGeneral, "Speeduino Help"
2015-02-02 22:25:43 -08:00
;-------------------------------------------------------------------------------
[UserDefined]
; define a MegaTune compatible version here
; no need to for std_enrichments, it is built in.
2015-10-17 15:18:53 -07:00
[SettingContextHelp]
; constantName = "Help Text"
; tool tips tooltips
;Ensure all settings are defined as some MS2/BG words shipped with TS are not applicable.
nCylinders = "The number of cylinders in your engine."
engineType = "Most engines are Even Fire. Typical odd-fire engines are V-twin, some V4, Vmax, some V6, V10."
twoStroke = "Four-Stroke (most engines), Two-stroke."
nInjectors = "Number of primary injectors."
2015-10-24 22:16:59 -07:00
mapSample = "The method used for calculating the MAP reading\nFor 1-2 Cylinder engines, Cycle Minimum is recommended.\nFor more than 2 cylinders Cycle Average is recommended"
2015-10-17 15:18:53 -07:00
TrigPattern = "The type of input trigger decoder to be used."
numteeth = "Number of teeth on Primary Wheel."
TrigSpeed = "Primary trigger speed."
onetwo = "Number of Missing teeth on Primary Wheel."
TrigAng = "The Angle ATDC when tooth No:1 on the primary wheel passes the primary sensor."
StgCycles = "The number of revolutions that will be skipped during cranking before the injectors and coils are fired."
TrigEdge = "The Trigger edge of the primary sensor.\nLeading.\nTrailing."
2016-02-29 03:23:09 -08:00
sparkMode = "Wasted Spark: Ignition outputs are on the channels <= half the number of cylinders. Eg 4 cylinder outputs on IGN1 and IGN2.\nSingle Channel: All ignition pulses are output on IGN1.\nWasted COP: Ignition pulses are output on all ignition channels up to the number of cylinders. Eg 4 cylinder outputs on all ignition channels. No valid for >4 cylinders"
IgInv = "Whether the spark fires when the ignition sign goes high or goes low. Most ignition systems 'Going Low' but please verify this as damage to coils can result from the incorrect selection
2015-10-28 12:13:13 -07:00
2016-02-17 20:00:16 -08:00
iacChannels = "The number of output channels used for PWM valves. Select 1 for 2-wire valves or 2 for 3-wire valves."
2015-10-17 15:18:53 -07:00
iacStepTime = "Time between each stepper motor step.\nIncrease this if the motor appears to behave intermittently."
2015-10-24 22:16:59 -07:00
iacStepHome = "On startup the stepper motor moves this many steps to return to its home position. Set this value to a few more than the actual number to ensure the motor has returned to its full position."
2015-10-17 15:18:53 -07:00
iacStepHyster = "The minimum number of steps to move in any one go."
iacAlgorithm = "Selects method of idle control.\nNone = no idle control valve.\nOn/Off valve.\nPWM valve (2,3 wire).\nStepper Valve (4,6,8 wire)."
2016-02-29 03:23:09 -08:00
dfcoRPM = "The RPM above which DFCO will be active. Typically set a few hundred RPM above maximum idle speed
dfcoHyster = "Hysteresis for DFCO RPM. 200-300 RPM is typical for this, however a higher value may be needed if the RPM is fluctuating around the cutout speed"
dfcoTPSThresh = "The TPS value above which DFCO will be active. Typical value is 5%-10%, but higher may be needed if TPS signal is noisy"
2015-02-02 22:25:43 -08:00
[UserDefinedTS]
; Enhanced TunerStudio dialogs can be defined here
; MegaTune will over look this section
; These dialogs will over-ride those in the UserDefined Section
; User defined ar loaded first, then if one by the same name is defiend here,
; it will replace the MegaTune definition
; dialog = name, Title, Layout
;
; valid options for layout are xAxis, yAxis, border
; for an xAxis, each field added will be added from right to left
; A yAxis layout will add fields from top to bottom
; A border layout will expect an additional constraint to determine placement
; valid border constraints are north, South, East, West, Center
; all 5 do not need to be filled.
; The field name can be either a constant reference, or a reference to another
; dialog which will be added.
; dialogs can be nested and can be mixed with fields
2015-03-15 04:54:47 -07:00
dialog = engine_constants_south
2015-10-18 02:09:12 -07:00
topicHelp = Mhelp
2016-01-04 13:00:47 -08:00
field = "Injector Layout", injLayout, { nCylinders <= 4 }
2015-03-15 04:54:47 -07:00
field = "Board Layout", pinLayout
2015-10-08 18:42:09 -07:00
field = "MAP Sample method", mapSample
2015-03-15 04:54:47 -07:00
dialog = engine_constants, ""
panel = std_injection, North
panel = engine_constants_south, South
2016-02-24 18:11:13 -08:00
dialog = accelEnrichments_center, ""
2015-02-02 22:25:43 -08:00
field = "TPSdot Threshold", tpsThresh
field = "Accel Time", taeTime
; field = "Cold Accel Enrichment", taeColdA
; field = "Cold Accel Mult", taeColdM
field = "Decel Fuel Amount", tdePct
2016-02-24 18:11:13 -08:00
dialog = accelEnrichments_south, "Decelleration Fuel Cutoff (DFCO)"
field = "Enabled", dfcoEnabled
field = "TPS Threshold", dfcoTPSThresh, { dfcoEnabled }
field = "Cutoff RPM", dfcoRPM, { dfcoEnabled }
field = "RPM Hysteresis", dfcoHyster, { dfcoEnabled }
2015-02-02 22:25:43 -08:00
dialog = accelEnrichments_north, "", xAxis
panel = time_accel_tpsdot_curve
;panel = time_accel_tpsdot_tbl
dialog = accelEnrichments, "Acceleration Enrichment"
panel = accelEnrichments_north, North
2016-02-24 18:11:13 -08:00
panel = accelEnrichments_center, Center
2015-02-02 22:25:43 -08:00
panel = accelEnrichments_south, South
2015-02-13 04:12:00 -08:00
dialog = injChars, "Injector Characteristics"
field = "Injector Open Time", injOpen
2015-10-21 04:19:15 -07:00
field = "Injector close angle"
2015-05-28 07:15:27 -07:00
field = "Channel 1", inj1Ang
field = "Channel 2", inj2Ang, { nCylinders > 1 }
field = "Channel 3", inj3Ang, { nCylinders > 4 || nCylinders == 3 }
field = "Channel 4", inj4Ang, { nCylinders > 6 }
2015-06-11 20:18:36 -07:00
field = "Injector Duty Limit", dutyLim
2015-03-20 16:41:53 -07:00
panel = injector_voltage_curve
2015-02-02 22:25:43 -08:00
dialog = egoControl, ""
field = "Sensor Type", egoType
field = "Algorithm", egoAlgorithm, { egoType }
field = "Ignition Events per Step", egoCount, { egoType && (egoAlgorithm < 3) }
2015-02-02 23:01:18 -08:00
field = "Controller Step Size", egoDelta, { egoType && (egoAlgorithm == 0) }
field = "Controller Auth +/-", egoLimit, { egoType && (egoAlgorithm < 3) }
field = "Only correct above:", ego_min, { egoType && (egoAlgorithm < 3) }
field = "and correct below:", ego_max, { egoType && (egoAlgorithm < 3) }
field = "Active Above Coolant", egoTemp, { egoType && (egoAlgorithm < 3) }
field = "Active Above RPM", egoRPM, { egoType && (egoAlgorithm < 3) }
field = "Active Below TPS", egoTPSMax, { egoType && (egoAlgorithm < 3) }
field = "Active Below Load", egoLoadMax, { egoType && (egoAlgorithm < 3) }
field = "Active Above Load", egoLoadMin, { egoType && (egoAlgorithm < 3) }
field = "EGO delay after start", ego_sdelay, { (egoAlgorithm < 3) }
field = "PID Proportional Gain", egoKP, { egoType && (egoAlgorithm == 2) }
field = "PID Integral", egoKI, { egoType && (egoAlgorithm == 2) }
field = "PID Derivative", egoKD, { egoType && (egoAlgorithm == 2) }
2015-07-23 21:40:24 -07:00
dialog = fanSettings,"Fan Settings",7
field = "Fan Enabled", fanEnable
field = "Fan Output Inverted (see F1)", fanInv
field = "Fan temperature SP", fanSP
field = "Fan hysteresis", fanHyster
2015-08-25 04:52:05 -07:00
dialog = stepper_idle, "Stepper Idle"
field = "Step time (ms)", iacStepTime, { iacAlgorithm == 4 || iacAlgorithm == 5 }
field = "Home steps", iacStepHome, { iacAlgorithm == 4 || iacAlgorithm == 5 }
2015-08-25 20:27:50 -07:00
field = "Minimum Steps", iacStepHyster, { iacAlgorithm == 4 || iacAlgorithm == 5 }
2015-09-29 16:27:37 -07:00
dialog = pwm_idle, "PWM Idle"
2016-01-12 22:06:55 -08:00
field = "Number of outputs", iacChannels, { iacAlgorithm == 2 || iacAlgorithm == 3 }
2015-09-29 16:27:37 -07:00
field = "Idle valve frequency", idleFreq, { iacAlgorithm == 2 || iacAlgorithm == 3 }
2015-08-25 04:52:05 -07:00
dialog = idleSettings, "Idle Settings"
2015-10-17 15:18:53 -07:00
topicHelp = "http://speeduino.com/wiki/index.php/Idle"
field = "Idle control type", iacAlgorithm
2015-08-25 04:52:05 -07:00
field = "#Fast Idle"
field = "Fast idle temp", iacFastTemp, { iacAlgorithm == 1 }
2015-09-29 16:27:37 -07:00
panel = pwm_idle
2015-08-25 04:52:05 -07:00
panel = stepper_idle
2015-02-02 22:25:43 -08:00
2015-10-17 04:23:34 -07:00
dialog = crankPW, "Cranking Pulsewidths (ms)"
field = "Cranking RPM (Max)", crankRPM
field = "Flood Clear level", tpsflood
field = ""
2015-12-20 20:45:52 -08:00
field = "Fuel pump prime duration", fpPrime
2015-10-17 04:23:34 -07:00
field = "Priming Pulsewidth", primePulse
field = ""
field = "Cranking Enrichment %", crankingPct
2015-02-02 22:25:43 -08:00
2015-10-17 04:23:34 -07:00
dialog = aseSettings, "Afterstart Enrichment"
field = "Enrichment %", asePct
field = "Number of Sec to run", aseCount
2015-02-02 22:25:43 -08:00
2015-10-17 04:23:34 -07:00
dialog = triggerSettings,"Trigger Settings",4
2015-10-21 04:19:15 -07:00
topicHelp = "http://speeduino.com/wiki/index.php/Decoders"
2015-10-17 04:23:34 -07:00
field = "Trigger Pattern", TrigPattern
field = "Primary base teeth", numteeth, { TrigPattern == 0 || TrigPattern == 2 }
field = "Primary trigger speed", TrigSpeed, { TrigPattern == 0 }
field = "Missing teeth", onetwo, { TrigPattern == 0 }
field = "Secondary teeth", onetwo, { TrigPattern == 2 }
field = "Trigger Angle ", TrigAng
field = "This number represents the angle ATDC when "
field = "tooth #1 passes the primary sensor."
field = ""
field = "Skip Revolutions", StgCycles
field = "Note: This is the number of revolutions that will be skipped during"
field = "cranking before the injectors and coils are fired"
field = "Trigger edge", TrigEdge
2015-05-18 05:46:22 -07:00
2015-10-17 04:23:34 -07:00
dialog = sparkSettings,"Spark Settings",4
2015-10-28 12:13:13 -07:00
field = "Spark output mode", sparkMode
2015-10-17 04:23:34 -07:00
field = "Cranking advance Angle", CrankAng
;field = "Hold Ignition", IgHold
field = "Spark Outputs triggers", IgInv
field = ""
field = "Fixed Angle (0 = use map)", FixAng
;field = "Trim Angle", Trim
2015-02-02 22:25:43 -08:00
2015-02-28 13:27:16 -08:00
dialog = dwellSettings, "Dwell Settings", 4
2015-10-17 04:23:34 -07:00
topicHelp = DwellHelp
2016-02-29 03:23:09 -08:00
;field = "Dwell control", dwellcont
;field = "Or:"
field = " Cranking dwell", dwellcrank
field = " Running dwell", dwellrun
2015-10-17 04:23:34 -07:00
;field = "Minimum discharge period", mindischg, { dwellcont }
field = ""
field = "#Note"
field = "The above times are for 12V. Voltage correction"
field = "is applied. At higher voltages the time is reduced"
field = "and when low it is increased"
field = ""
field = "Overdwell protection"
field = "Use Overdwell protection", useDwellLim
field = "Max dwell time", dwellLim, { useDwellLim }
field = "Note: Set the maximum dwell time at least 3ms above"
field = "your desired dwell time (Including cranking)"
2015-02-02 22:25:43 -08:00
2015-02-28 13:27:16 -08:00
dialog = RevLimiterS, "Rev Limiter", 4
2015-10-17 04:23:34 -07:00
topicHelp = Fhelp7
field = "Rev Limiter"
field = "Soft rev limit", SoftRevLim
field = "Soft limit absolute timing", SoftLimRetard
field = "Soft limit max time", SoftLimMax
field = "Hard Rev limit", HardRevLim
dialog = LaunchControl, "Launch Control", 6
topicHelp = Fhelp7
field = "Launch Control"
field = "Enable Launch", launchEnable
field = "Launch Input Pin", launchPin, { launchEnable }
field = "Soft rev limit", lnchSoftLim, { launchEnable }
field = "Soft limit absolute timing", lnchRetard, { launchEnable }
field = "Hard rev limit", lnchHardLim, { launchEnable }
field = "Fuel adder during launch", lnchFuelAdd, { launchEnable }
2015-02-28 13:27:16 -08:00
2015-06-09 06:32:00 -07:00
dialog = OLED, "OLED Display", 2
2015-02-28 13:27:16 -08:00
field = "Display Type", display
2015-03-01 16:11:47 -08:00
field = "#Note"
field = "ECU must be rebooted after changing above value"
2015-02-28 13:27:16 -08:00
field = "Field 1", display1, { display }
field = "Field 2", display2, { display }
field = "Field 3", display3, { display }
field = "Field 4", display4, { display }
2015-03-01 16:11:47 -08:00
;field = "Bar 1", displayB1, { display }
;field = "Bar 2", displayB2, { display > 2 }
2015-02-02 22:25:43 -08:00
2015-09-16 05:23:06 -07:00
dialog = mapCal, "Calibrate MAP"
field = "#MAP Sensor"
settingSelector = "Common MAP Sensors"
settingOption = "MPX4115", mapMin=10, mapMax=122
settingOption = "MPX4250", mapMin=10, mapMax=260
settingOption = "GM 1-BAR", mapMin=10, mapMax=105
settingOption = "GM 2-BAR", mapMin=9, mapMax=208
settingOption = "GM 3-BAR / MPXH6300", mapMin=1, mapMax=315
2015-09-17 22:55:19 -07:00
settingOption = "MPXH5700", mapMin=0, mapMax=700
2015-09-16 05:23:06 -07:00
settingOption = "MPXH6400", mapMin=3, mapMax=416
2015-09-24 13:24:40 -07:00
2015-09-27 05:51:10 -07:00
dialog = boostSettings, "Boost Control"
field = "Boost Control Enabled", boostEnabled
field = "Boost solenoid freq.", boostFreq
dialog = vvtSettings, "VVT Control"
field = "VVT Control Enabled", vvtEnabled
field = "VVT solenoid freq.", vvtFreq
2015-09-16 05:23:06 -07:00
2015-10-17 15:18:53 -07:00
;-------------------------------------------------------------------------------
; General help text
help = helpGeneral, "Speeduino General Help"
webHelp = "http://speeduino.com/wiki/index.php/Speeduino"
text = "For current WIKI documentation, click the Web Help button,"
text = "or visit http://www.speeduino.com/."
text = "<br>"
text = "<br>why not visit our forum http://speeduino.com/forum/"
;------------------------------------------------------------------------------
2015-02-02 22:25:43 -08:00
; -------------------------------------------------------------
; Help down here
2015-10-18 02:09:12 -07:00
[SettingContextHelp]
2015-10-24 22:16:59 -07:00
2015-02-02 22:25:43 -08:00
[CurveEditor]
;time-based accel enrichment
curve = time_accel_tpsdot_curve, "TPS based AE"
columnLabel = "TPSdot", "Added"
xAxis = 0, 1200, 6
yAxis = 0, 48, 4
xBins = taeBins, TPSdot
yBins = taeRates
;gauge = cltGauge
2015-03-19 21:13:16 -07:00
; Correction curve for dwell vs battery voltage
curve = dwell_correction_curve, "Dwell voltage correction"
2015-03-20 16:41:53 -07:00
columnLabel = "Voltage", "Dwell"
2015-03-19 21:13:16 -07:00
xAxis = 6, 22, 6
yAxis = 0, 255, 6
xBins = brvBins, batteryVoltage
yBins = dwellRates
2015-02-02 22:25:43 -08:00
2015-03-20 16:41:53 -07:00
; Correction curve for injectors vs battery voltage
curve = injector_voltage_curve, "Injector voltage correction"
2016-02-09 15:50:23 -08:00
columnLabel = "Voltage", "Injector"
2015-03-20 16:41:53 -07:00
xAxis = 6, 22, 6
yAxis = 0, 255, 6
xBins = brvBins, batteryVoltage
yBins = injBatRates
2015-04-21 23:49:10 -07:00
; Correction curve for Air Density vs temperature
curve = airdensity_curve, "IAT density correction"
2016-02-04 11:25:26 -08:00
columnLabel = "Air Temperature", "Fuel Amount"
2015-10-18 02:09:12 -07:00
xAxis = -40, 160, 6
2015-04-21 23:49:10 -07:00
yAxis = 0, 255, 6
xBins = airDenBins, iat
yBins = airDenRates
2016-01-02 12:40:27 -08:00
; IAT based ignition timing retard
curve = iat_retard_curve, "IAT timing retard"
2016-02-04 11:25:26 -08:00
columnLabel = "Inlet Air Temp", "Retard"
2016-01-02 12:40:27 -08:00
xAxis = -40, 200, 5
2016-02-29 03:23:09 -08:00
yAxis = 0, 30, 5
2016-01-02 12:40:27 -08:00
xBins = iatRetBins, iat
2016-02-04 11:25:26 -08:00
yBins = iatRetRates
2015-04-21 23:49:10 -07:00
2015-06-02 05:30:53 -07:00
; Curves for idle control
; Standard duty table for PWM valves
curve = iacPwm_curve, "IAC PWM Duty"
2016-02-09 15:50:23 -08:00
columnLabel = "Coolant Temperature", "Valve"
2015-06-02 05:30:53 -07:00
xAxis = -40, 215, 6
yAxis = 0, 100, 4
xBins = iacBins, coolant
yBins = iacOLPWMVal
; Cranking duty table for PWM valves
curve = iacPwmCrank_curve, "IAC PWM Cranking Duty"
2016-02-09 15:50:23 -08:00
columnLabel = "Coolant Temperature", "Valve"
2015-06-02 05:30:53 -07:00
xAxis = -40, 215, 6
yAxis = 0, 100, 4
xBins = iacCrankBins, coolant
yBins = iacCrankDuty
2015-08-21 00:20:56 -07:00
curve = iacStep_curve, "IAC Stepper Motor"
2016-02-09 15:50:23 -08:00
columnLabel = "Coolant Temperature", "Motor"
2015-08-25 20:27:50 -07:00
xAxis = -40, 120, 6
yAxis = 0, 850, 4
2015-08-21 00:20:56 -07:00
xBins = iacBins, coolant
yBins = iacOLStepVal
curve = iacStepCrank_curve, "IAC Stepper Motor Cranking"
2016-02-09 15:50:23 -08:00
columnLabel = "Coolant Temperature", "Motor"
2015-08-25 20:27:50 -07:00
xAxis = -40, 120, 6
yAxis = 0, 850, 4
xBins = iacCrankBins, coolant
2015-08-21 00:20:56 -07:00
yBins = iacCrankSteps
2015-02-02 22:25:43 -08:00
[TableEditor]
; table_id, map3d_id, "title", page
2015-02-02 23:01:18 -08:00
table = veTable1Tbl, veTable1Map, "VE Table", 1
2015-10-17 15:18:53 -07:00
topicHelp = "http://speeduino.com/wiki/index.php/Tuning"
; constant, variable
2015-02-02 22:25:43 -08:00
xBins = rpmBins, rpm
#if SPEED_DENSITY
yBins = mapBins, map
#else
yBins = tpsBins, throttle
#endif
zBins = veTable
gridHeight = 2.0
gridOrient = 250, 0, 340 ; Space 123 rotation of grid in degrees.
upDownLabel = "(RICHER)", "(LEANER)"
2015-06-09 06:32:00 -07:00
table = sparkTbl, sparkMap, "Ignition Advance Table", 3
2015-02-02 22:25:43 -08:00
xBins = rpmBins2, rpm
#if SPEED_DENSITY
yBins = mapBins2, map
#else ALPHA_N
yBins = tpsBins2, throttle
#endif
zBins = advTable1
gridHeight = 3.0
upDownLabel = "ADVANCED", "RETARDED"
2015-06-09 06:32:00 -07:00
;table = afrTbl, afrTableMap, "AFR Table", 5
table = afrTable1Tbl, afrTable1Map, "AFR Table", 5
2015-02-02 22:25:43 -08:00
xBins = rpmBinsAFR, rpm
#if SPEED_DENSITY
yBins = mapBinsAFR, map
#else ALPHA_N
yBins = tpsBinsAFR, throttle
#endif
zBins = afrTable
gridHeight = 1.0
upDownLabel = "RICHER", "LEANER"
gridOrient = 250, 0, 340
2015-09-24 13:24:40 -07:00
2015-09-27 05:51:10 -07:00
table = boostTbl, boostMap, "Boost control Table", 8
2015-09-24 13:24:40 -07:00
xBins = rpmBinsBoost, rpm
yBins = tpsBinsBoost, throttle
zBins = boostTable
gridHeight = 3.0
upDownLabel = "HIGHER", "LOWER"
2015-09-27 05:51:10 -07:00
table = vvtTbl, vvtMap, "VVT control Table", 8
xBins = rpmBinsVVT, rpm
yBins = tpsBinsVVT, throttle
zBins = vvtTable
gridHeight = 3.0
upDownLabel = "HIGHER", "LOWER"
2015-02-02 22:25:43 -08:00
;-------------------------------------------------------------------------------
[GaugeConfigurations]
;-------------------------------------------------------------------------------
; Notes on some of the gauges.
;
; The accelEnrichGauge is now a composite of both acceleration enrichment
; and deceleration enleanment numbers. See the definition of the variable
; accDecEnrich in the OutputChannels section.
;
; David Hooke contributed the lambda gauge and associated transfer
; function files.
;
; "The lambda gauge is the best way (my opinion) to report data from a
; wide band EGO gauge, it standardizes the output irrespective of fuel
; or mix of fuels, so you needn't do any brainwork to know if your 75%
; gasoline and 25% methanol is rich at 10:1 or not.
;
; "Use the file WBlambda100AVR.inc, if using a standard ADC (e.g., AVR cpu).
; Use the file WBlambda100MOT.inc, if using a biased ADC (e.g., MOT cpu)."
;-------------------------------------------------------------------------------
; Define a gauge's characteristics here, then go to a specific layout
; block (Tuning or FrontPage) and use the name you've defined here to
; display that gauge in a particular position.
;
; Name = Case-sensitive, user-defined name for this gauge configuration.
; Var = Case-sensitive name of variable to be displayed, see the
; OutputChannels block in this file for possible values.
; Title = Title displayed at the top of the gauge.
; Units = Units displayed below value on gauge.
; Lo = Lower scale limit of gauge.
; Hi = Upper scale limit of gauge.
; LoD = Lower limit at which danger color is used for gauge background.
; LoW = Lower limit at which warning color is used.
; HiW = Upper limit at which warning color is used.
; HiD = Upper limit at which danger color is used.
; vd = Decimal places in displayed value
; ld = Label decimal places for display of Lo and Hi, above.
;Name Var Title Units Lo Hi LoD LoW HiW HiD vd ld
2015-09-07 18:24:56 -07:00
; baroADCGauge = baroADC, "Barometer ADC", "", 0, 255, -1, -1, 256, 256, 0, 0
2015-09-16 05:23:06 -07:00
; mapADCGauge = mapADC, "MAP ADC", "", 0, 255, -1, -1, 256, 256, 0, 0
2015-02-02 22:25:43 -08:00
#matADCGauge = matADC, "MAT ADC", "", 0, 255, -1, -1, 256, 256, 0, 0
#cltADCGauge = cltADC, "CLT ADC", "", 0, 255, -1, -1, 256, 256, 0, 0
tpsADCGauge = tpsADC, "TPS ADC", "", 0, 255, -1, -1, 256, 256, 0, 0
#batVoltGauge = batteryVoltage, "BAT V", "", 0, 255, -1, -1, 256, 256, 0, 0
2015-02-06 17:09:50 -08:00
accelEnrichGauge = accelEnrich, "Accel Enrich", "%", 50, 150, -1, -1, 999, 999, 0, 0
2015-02-02 22:25:43 -08:00
afrGauge = afr, "Air:Fuel Ratio", "", 7, 25, 12, 13, 15, 16, 2, 2
2015-10-17 15:18:53 -07:00
afrGauge2 = afr2, "Air:Fuel Ratio 2", "", 7, 25, 12, 13, 15, 16, 2, 2
2015-02-13 04:12:00 -08:00
dutyCycleGauge = dutyCycle, "Duty Cycle", "%", 0, 100, -1, -1, 70, 80, 1, 1
2015-02-02 22:25:43 -08:00
egoCorrGauge = egoCorrection, "EGO Correction", "%", 50, 150, 90, 99, 101, 110, 0, 0
gammaEnrichGauge = gammaEnrich, "Gamma Enrichment", "%", 50, 150, -1, -1, 151, 151, 0, 0
pulseWidthGauge = pulseWidth, "Pulse Width", "mSec", 0, 25.5, 1.0, 1.2, 20, 25, 1, 1
tachometer = rpm, "Engine Speed", "RPM", 0, 8000, 300, 600, 3000, 5000, 0, 0
throttleGauge = throttle, "Throttle Position", "%TPS", 0, 100, -1, 1, 90, 100, 0, 0
tpsGauge = tps, "Throttle Position2", "%TPS", 0, 100, -1, 1, 90, 100, 0, 0
veBucketGauge = veTuneValue, "VE Value", "%", 0, 120, -1, -1, 999, 999, 0, 0
veGauge = veCurr, "VE Current", "%", 0, 120, -1, -1, 999, 999, 0, 0
voltMeter = batteryVoltage,"Battery Voltage", "volts", 0, 25, 8, 9, 15, 16, 2, 2
2015-02-06 18:50:23 -08:00
warmupEnrichGauge = warmupEnrich, "Warmup Enrichment", "%", 100, 200, 130, 140, 140, 150, 0, 0
2015-02-02 22:25:43 -08:00
2015-10-17 15:18:53 -07:00
gaugeCategory = "Sensor inputs"
mapGauge = map, "Engine MAP", "kPa", 0, 255, 0, 20, 200, 245, 0, 0
2015-02-02 22:25:43 -08:00
#if CELSIUS
2015-05-23 06:11:33 -07:00
cltGauge = coolant, "Coolant Temp", "TEMP", -40, 215, -15, 0, 95, 105, 0, 0
iatGauge = iat, "Inlet Air Temp", "TEMP", -40, 215, -15, 0, 95, 100, 0, 0
2015-02-02 22:25:43 -08:00
#else
2015-05-23 06:11:33 -07:00
cltGauge = coolant, "Coolant Temp", "TEMP", -40, 215, 0, 30, 200, 220, 0, 0
2015-04-21 23:49:10 -07:00
iatGauge = iat, "Inlet Air Temp", "TEMP", -40, 215, 0, 30, 200, 210, 0, 0
2015-02-02 22:25:43 -08:00
#endif
advanceGauge = advance, "Spark Advance", "deg BTDC", 50, -10, 0, 0, 35, 45, 0,
2015-10-17 15:18:53 -07:00
gaugeCategory = "Other"
clockGauge = secl, "Clock", "Seconds", 0, 255, 10, 10, 245, 245, 0, 0
deadGauge = deadValue, "---", "", 0, 1, -1, -1, 2, 2, 0, 0
2015-02-02 22:25:43 -08:00
loopGauge = loopsPerSecond,"Main loop speed", "Loops/S" , 0, 20000, -1, 500,1800, 4000, 0, 0
memoryGauge = freeRAM, "Free memory", "bytes" , 0, 8000, -1, 1000,8000, 1000, 0, 0
;-------------------------------------------------------------------------------
[FrontPage]
2015-10-03 16:38:48 -07:00
2015-02-02 22:25:43 -08:00
; Gauges are numbered left to right, top to bottom.
;
; 1 2 3 4
; 5 6 7 8
gauge1 = tachometer
#if SPEED_DENSITY
gauge2 = throttleGauge
#else
gauge2 = tpsGauge
#endif
gauge3 = pulseWidthGauge
gauge4 = dutyCycleGauge
gauge5 = mapGauge
2015-04-21 23:49:10 -07:00
gauge6 = iatGauge
2015-02-02 22:25:43 -08:00
gauge7 = cltGauge
gauge8 = gammaEnrichGauge
;----------------------------------------------------------------------------
; Indicators
; expr off-label on-label, off-bg, off-fg, on-bg, on-fg
indicator = { ready }, "Not Ready", "Ready", white, black, green, black
indicator = { crank }, "Not Cranking", "Cranking", white, black, green, black
indicator = { startw }, "ASE OFF", "ASE", white, black, green, black
indicator = { warmup }, "WUE OFF", "WUE", white, black, green, black
indicator = { tpsaccaen }, "TPS Accel", "TPS Accel", white, black, green, black
indicator = { mapaccaen }, "MAP Accel", "MAP Accel", white, black, green, black
indicator = { tpsaccden }, "TPS Decel", "TPS Decel", white, black, green, black
indicator = { mapaccden }, "MAP Decel", "MAP Decel", white, black, green, black
2015-02-06 13:29:51 -08:00
indicator = { (tps > tpsflood) && (rpm < crankRPM) }, "FLOOD OFF", "FLOOD CLEAR", white, black, red, black
2016-02-29 16:53:08 -08:00
indicator = { DFCOOn }, "DFCO OFF", "DFCO On", white, black, red, black
2015-02-02 22:25:43 -08:00
;-------------------------------------------------------------------------------
[RunTime]
barHysteresis = 2.5 ; Seconds
#if CELSIUS
2015-05-23 06:11:33 -07:00
coolantBar = -40, 215
matBar = -40, 215
2015-02-02 22:25:43 -08:00
#else
coolantBar = -40, 215
matBar = -40, 215
#endif
batteryBar = 6, 15
dutyCycleBar = 0, 100
2015-10-03 16:38:48 -07:00
2015-02-02 22:25:43 -08:00
gammaEBar = 0, 200
mapBar = 0, 255
pulseWidthBar = 0, 25.5
rpmBar = 0, 8000
throttleBar = 0, 100
egoCorrBar = 0, 200
baroCorrBar = 0, 200
warmupCorrBar = 0, 200
airdenCorrBar = 0, 200
veCorrBar = 0, 200
accCorrBar = 0, 100
;-------------------------------------------------------------------------------
[Tuning]
font = "Courier", 14
spotDepth = 2 ; 0 = no indicators, 1 = Z only, 2 = XYZ indicators.
cursorDepth = 2 ; Same as spot depth.
; The four radio buttons on the tuning screen select a "page" of six
; gauges. The gauge numbering is the same as the front page, across
; then down.
; 1 2
; 3 4
; 5 6
;
; gaugeColumns allows you to hide or show gauges in column 2 (i.e.,
; gauges 2, 4 and 6).
gaugeColumns = 2 ; Only 1 or 2 are valid.
;----------------------------------------------------------------------------
; Notes on tuning screen gauges:
; pageButtons = Labels for radio buttons at bottom of tuning dialog.
;
; Gauge 2 previously switched automatically to be tpsGauge when alpha-n
; was enabled, but you need to do it manually now.
;----------------------------------------------------------------------------
; Page 1 Page 2 Page 3 Page 4
pageButtons = "&EGO", "&WUE", "PW&1", "PW&2"
gauge1 = tachometer, tachometer, tachometer, tachometer
gauge2 = mapGauge, mapGauge, mapGauge, mapGauge
gauge3 = egoGauge, egoGauge, egoGauge, egoGauge
gauge4 = egoCorrGauge, warmupEnrichGauge, pulseWidthGauge, pulseWidthGauge
gauge5 = veBucketGauge, veBucketGauge, veBucketGauge, veBucketGauge
gauge6 = accelEnrichGauge, accelEnrichGauge, dutyCycleGauge, dutyCycleGauge
;-------------------------------------------------------------------------------
[OutputChannels]
2015-09-27 13:48:30 -07:00
; The number of bytes MegaTune or TunerStudio should expect as a result
; of sending the "A" command to Speeduino is determined
2015-02-02 22:25:43 -08:00
; by the value of ochBlockSize, so be very careful when
; you change it.
deadValue = { 0 } ; Convenient unchanging value.
ochGetCommand = "A"
2015-10-21 04:19:15 -07:00
ochBlockSize = 33
2015-02-02 22:25:43 -08:00
secl = scalar, U08, 0, "sec", 1.000, 0.000
squirt = scalar, U08, 1, "bits", 1.000, 0.000
2015-10-24 22:16:59 -07:00
inj1Status = bits, U08, 1, [0:0]
inj2Status = bits, U08, 1, [1:1]
inj3Status = bits, U08, 1, [2:2]
inj4Status = bits, U08, 1, [3:3]
2016-02-29 16:53:08 -08:00
DFCOOn = bits, U08, 1, [4:4]
2015-10-24 22:16:59 -07:00
unusedSquirt1 = bits, U08, 1, [5:5]
toothLog1Ready = bits, U08, 1, [6:6]
toothLog2Ready = bits, U08, 1, [7:7]
2015-02-02 22:25:43 -08:00
engine = scalar, U08, 2, "bits", 1.000, 0.000
2015-10-24 22:16:59 -07:00
ready = bits, U08, 2, [0:0]
crank = bits, U08, 2, [1:1]
startw = bits, U08, 2, [2:2]
warmup = bits, U08, 2, [3:3]
tpsaccaen = bits, U08, 2, [4:4]
tpsaccden = bits, U08, 2, [5:5]
mapaccaen = bits, U08, 2, [6:6]
mapaccden = bits, U08, 2, [7:7]
2015-09-07 18:24:56 -07:00
dwell = scalar, U08, 3, "ms", 0.100, 0.000
2015-09-17 16:41:10 -07:00
map = scalar, U08, 4, "kpa", 2.000, 0.000
2015-02-02 22:25:43 -08:00
#if CELSIUS
2015-04-21 23:49:10 -07:00
iatRaw = scalar, U08, 5, "<22> C", 1.000, 0.000
2015-02-02 22:25:43 -08:00
coolantRaw = scalar, U08, 6, "<22> C", 1.000, 0.000
#else
2015-12-14 17:48:59 -08:00
iatRaw = scalar, U08, 5, "<22> F", 1.800, 32.000
coolantRaw = scalar, U08, 6, "<22> F", 1.800, 32.000
2015-02-02 22:25:43 -08:00
#endif
tpsADC = scalar, U08, 7, "ADC", 1.000, 0.000
batteryVoltage = scalar, U08, 8, "V", 0.100, 0.000
afr = scalar, U08, 9, "O2", 0.100, 0.000
egoCorrection = scalar, U08, 10, "%", 1.000, 0.000
airCorrection = scalar, U08, 11, "%", 1.000, 0.000
warmupEnrich = scalar, U08, 12, "%", 1.000, 0.000
2015-09-17 18:18:56 -07:00
rpm = scalar, U16, 13, "rpm", 1.000, 0.000
2015-02-02 22:25:43 -08:00
accelEnrich = scalar, U08, 15, "%", 1.000, 0.000
baroCorrection = scalar, U08, 16, "%", 1.000, 0.000
gammaEnrich = scalar, U08, 17, "%", 1.000, 0.000
veCurr = scalar, U08, 18, "%", 1.000, 0.000
2015-02-05 13:11:00 -08:00
afrTarget = scalar, U08, 19 "O2", 0.100, 0.000
2015-04-21 23:49:10 -07:00
pulseWidth = scalar, U08, 20, "ms", 0.1, 0.000
2015-02-16 21:31:26 -08:00
TPSdot = scalar, U08, 21, "%/s", 10.00, 0.000
2015-02-02 22:25:43 -08:00
advance = scalar, U08, 22, "deg", 1.000, 0.000
tps = scalar, U08, 23, "%", 1.000, 0.000
loopsPerSecond = scalar, S16, 24, "loops", 1.000, 0.000
freeRAM = scalar, S16, 26, "bytes", 1.000, 0.000
2015-04-04 03:10:13 -07:00
batCorrection = scalar, U08, 28, "%", 1.000, 0.000
2015-04-21 23:49:10 -07:00
dwell = scalar, U08, 29, "ms", 0.1, 0.000
2015-09-16 05:23:06 -07:00
afr2 = scalar, U08, 30, "O2", 0.100, 0.000
2015-10-21 04:19:15 -07:00
rpmDOT = scalar, S16, 31, "rpm/s", 1.000, 0.000
2015-02-02 22:25:43 -08:00
; Computed output channels. See "megatuneExamples.ini" for all the
; pre-defined variables, search for "???" and you'll see them.
accDecEnrich = { accelEnrich + ((engine & 0b00100000) ? tdePct : 100) }
coolant = { coolantRaw - 40 } ; Coolant sensor temperature in user units.
2015-04-21 23:49:10 -07:00
iat = { iatRaw - 40 } ; Manifold temperature in user units.
2015-02-02 22:25:43 -08:00
; egoVoltage = { egoADC / 255.0 * 5.0 } ; EGO sensor voltage.
time = { timeNow } ; "timeNow" is a parameterless built-in function.
2015-03-15 04:54:47 -07:00
seconds = { secl };
2015-02-02 22:25:43 -08:00
afrtarget = { 0 }
; throttle = { table(tpsADC, "throttlefactor.inc") }
throttle = { tps }, "%"
2015-06-05 06:30:37 -07:00
;cycleTime = { 60000.0 / rpm * (2.0-twoStroke) }
cycleTime = { 60000.0 / rpm }
2015-02-02 22:25:43 -08:00
nSquirts = { nCylinders/divider }
2015-06-05 06:30:37 -07:00
dutyCycle = { 100.0*pulseWidth/cycleTime }
2015-02-02 22:25:43 -08:00
#if EXPANDED_CLT_TEMP
clt_exp = { 1 }
#else
clt_exp = { 0 }
#endif
#if CELSIUS
cltlowlim = { clt_exp ? -40 : -40 }
clthighlim = { clt_exp ? 230 : 120 }
cltlowdang = { clt_exp ? 65 : 10 }
cltlowwarn = { clt_exp ? 93 : 65 }
clthighwarn = { clt_exp ? 162 : 93 }
clthighdang = { clt_exp ? 176 : 104 }
mathigh = { 110 }
#else ; fahrenheit
cltlowlim = { clt_exp ? -40 : -40 }
clthighlim = { clt_exp ? 450 : 250 }
cltlowdang = { clt_exp ? 150 : 50 }
cltlowwarn = { clt_exp ? 200 : 150 }
clthighwarn = { clt_exp ? 325 : 200 }
clthighdang = { clt_exp ? 350 : 220 }
mathigh = { 215 }
#endif
;-------------------------------------------------------------------------------
[Datalog]
; Full datalog.
;
; Default user-defined log emulates the full datalog.
;
; The entries are saved in the datalog file in the order in
; which they appear in the list below.
;
; Channel - Case sensitive name of output channel to be logged.
; Label - String written to header line of log. Be careful
; about changing these, as programs like MSLVV and
; MSTweak key off specific column names.
; Type - Data type of output, converted before writing.
; Format - C-style output format of data.
;
; Channel Label Type Format
; -------------- ---------- ----- ------
entry = time, "Time", float, "%.3f"
entry = secl, "SecL", int, "%d"
2015-02-06 18:50:23 -08:00
entry = rpm, "RPM", int, "%d"
2015-02-02 22:25:43 -08:00
entry = map, "MAP", int, "%d"
entry = tpsADC, "tpsADC", int, "%d"
entry = tps, "TPS", int, "%d"
entry = afr, "O2", float, "%.3f"
2015-04-21 23:49:10 -07:00
entry = iat, "IAT", int, "%d"
entry = coolant, "CLT", int, "%d"
2015-02-02 22:25:43 -08:00
entry = engine, "Engine", int, "%d"
entry = squirt, "Squirt", int, "%d"
entry = egoCorrection, "Gego", int, "%d"
entry = airCorrection, "Gair", int, "%d"
entry = warmupEnrich, "Gwarm", int, "%d"
entry = baroCorrection, "Gbaro", int, "%d"
entry = gammaEnrich, "Gammae", int, "%d"
2015-02-16 21:31:26 -08:00
entry = accelEnrich, "TPSacc", int, "%d"
2015-02-02 22:25:43 -08:00
entry = veCurr, "VE", int, "%d"
entry = pulseWidth, "PW", float, "%.1f"
2015-02-05 13:11:00 -08:00
entry = afrTarget, "AFR Target", int, "%d"
2015-02-02 22:25:43 -08:00
entry = pulseWidth, "PW2", float, "%.1f"
entry = dutyCycle, "DutyCycle1", float, "%.1f"
entry = dutyCycle, "DutyCycle2", float, "%.1f"
entry = TPSdot, "TPS DOT", int, "%d"
entry = advance, "Ignition Advance", int,"%d"
2015-02-09 05:02:13 -08:00
entry = batteryVoltage, "Battery V", float, "%.1f"
2015-10-21 04:19:15 -07:00
entry = rpmDOT, "rpm/s", int, "%d"
2015-02-02 22:25:43 -08:00
[LoggerDefinition]
; valid logger types: composite, tooth, trigger, csv
;loggerDef = uniqueName, Display Name, type
loggerDef = tooth, "Tooth Logger", tooth
;dataReadCommand = "r\\x00\\xf4\\x00\\x00\\x04\\x00" ; standard TS command format
dataReadCommand = "T" ; Basic TS command format
2015-10-30 02:35:45 -07:00
dataReadTimeout = 15000 ; time in ms
2015-10-24 22:16:59 -07:00
dataReadyCondition = { toothLog1Ready }
2015-10-30 02:35:45 -07:00
dataLength = 256 ; in bytes, including headers, footers and data (not used)
2015-02-02 22:25:43 -08:00
;recordDef = headerLen. footerLen, recordLen
recordDef = 0, 0, 2; in bytes, the recordLen is for each record, currently limited to 4 bytes
;recordField = Name, HeaderName, startBit, bitCount, scale, units, updateCondition
2015-09-07 16:49:34 -07:00
recordField = toothGap, "ToothTime", 0, 16, 1.0, "uS"
2015-08-06 15:33:49 -07:00
2015-02-02 22:25:43 -08:00
2015-08-06 15:33:49 -07:00
[Tools]
;addTool = toolName, PanelName
addTool = veTableGenerator, "VE Table Generator", veTable1Tbl
addTool = afrTableGenerator, "AFR Table Generator", afrTable1Tbl
[VeAnalyze]
; tableName, lambdaTargetTableName, lambdaChannel, egoCorrectionChannel, activeCondition
veAnalyzeMap = veTable1Tbl, afrTable1Tbl, afr, egoCorrection
lambdaTargetTables = afrTable1Tbl, afrTSCustom,
filter = std_xAxisMin ; Auto build with appropriate axis channels
;filter = minRPMFilter, "Minimum RPM", rpm, < , 500, , true
filter = std_xAxisMax ; Auto build with appropriate axis channels
filter = std_yAxisMin ; Auto build with appropriate axis channels
filter = std_yAxisMax ; Auto build with appropriate axis channels
filter = std_DeadLambda ; Auto build
#if CELSIUS
filter = minCltFilter, "Minimum CLT", coolant, < , 71, , true
#else
filter = minCltFilter, "Minimum CLT", coolant, < , 160, , true
#endif
filter = accelFilter, "Accel Flag" , engine, & , 16, , false
filter = aseFilter, "ASE Flag" , engine, & , 4, , false
filter = overrunFilter, "Overrun" , pulseWidth, = , 0, , false
filter = std_Custom ; Standard Custom Expression Filter.