noisymime
/
speeduino
mirror of https://github.com/noisymime/speeduino.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #2 from noisymime/master 

17/10/2015 from master speed
This commit is contained in:
Autohome2 2015-10-17 22:31:58 +01:00
parent 56b5fcd69d f15d9d3bf3
commit 74681090f8
9 changed files with 858 additions and 530 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
comms.h
View File

@ -1,22 +1,33 @@
#ifndef COMMS_H
#define COMMS_H
//These are the page numbers that the Tuner Studio serial protocol uses to transverse the different map and config pages.
#define veMapPage 1
#define veSetPage 2
#define veSetPage 2//Config Page 1
#define ignMapPage 3
#define ignSetPage 4
#define ignSetPage 4//Config Page 2
#define afrMapPage 5
#define afrSetPage 6
#define iacPage 7
#define afrSetPage 6//Config Page 3
#define iacPage 7//Config Page 4
#define boostvvtPage 8
byte currentPage;
void command();
byte currentPage = 1;//Not the same as the speeduino config page numbers
boolean isMap = true;
const char pageTitles[] PROGMEM //This is being stored in the avr flash instead of SRAM which there is not very much of
{
"\nVolumetric Efficiancy Map\0"//This is an alternative to using a 2D array which would waste space because of the different lengths of the strings
"\nPage 1 Config\0"//The configuration page titles' indexes are found by counting the chars
"\nIgnition Map\0"//The map page titles' indexes are put into a var called currentTitleIndex. That represents the first char of each string.
"\nPage 2 Config\0"
"\nAir/Fuel Ratio Map\0"
"\nPage 3 Config\0"
"\nPage 4 Config"//No need to put a trailing null because it's the last string and the compliler does it for you.
};
void command();//This is the heart of the Command Line Interpeter. All that needed to be done was to make it human readable.
void sendValues();
void receiveValue(int offset, byte newValue);
void saveConfig();
void sendPage();
void sendPage(bool useChar);
void receiveCalibration(byte tableID);
void sendToothLog(bool useChar);
void testComm();

1043
comms.ino
View File

File diff suppressed because it is too large Load Diff

2
decoders.ino
View File

@ -352,6 +352,7 @@ void triggerSetup_4G63()
toothAngles[1] = 105; //Rising edge of tooth #2
toothAngles[2] = 175; //Falling edge of tooth #2
toothAngles[3] = 285; //Rising edge of tooth #1
/*
toothAngles[0] = 105; //Falling edge of tooth #1
toothAngles[1] = 175; //Rising edge of tooth #2
@ -431,6 +432,7 @@ int getCrankAngle_4G63(int timePerDegree)
int crankAngle = toothAngles[(tempToothCurrentCount - 1)] + configPage2.triggerAngle; //Perform a lookup of the fixed toothAngles array to find what the angle of the last tooth passed was.
crankAngle += ldiv( (micros() - tempToothLastToothTime), timePerDegree).quot; //Estimate the number of degrees travelled since the last tooth
if (crankAngle > 360) { crankAngle -= 360; }
if (crankAngle < 0) { crankAngle += 360; }
return crankAngle;
}

2
globals.h
View File

@ -142,7 +142,7 @@ struct config1 {
unsigned int inj4Ang;
//config1 in ini
byte mapType : 2;
byte mapSample : 2;
byte strokes : 1;
byte injType : 1;
byte nCylinders : 4; //Number of cylinders

BIN
reference/hardware/v0.4/Speeduino_v04_notes.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.7 MiB

BIN
reference/hardware/v0.4/schematic v0.4.1.fzz Normal file
View File

Binary file not shown.

254
reference/speeduino.ini
View File

@ -128,7 +128,7 @@ page = 2
inj4Ang = scalar, U16, 34, "deg", 1.0, 0.0, 0.0, 360, 0
; Config1
mapType = bits, U08, 36, [0:1], "115 kPa", "250 kPa", "INVALID", "INVALID"
mapSample = bits, U08, 36, [0:1], "Instantaneous", "Cycle Average", "Cycle Minimum", "INVALID"
twoStroke = bits, U08, 36, [2:2], "Four-stroke", "Two-stroke"
injType = bits, U08, 36, [3:3], "Port", "Throttle Body"
nCylinders = bits, U08, 36, [4:8], "INVALID","1","2","3","4","INVALID","6","INVALID","8","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID"
@ -215,46 +215,46 @@ page = 4
; name = scalar, type, offset, units, scale, translate, lo, hi, digits
;Dwell control
;running dwell variable railed to 8 - who needs more than 8ms?
dwellcont = bits, U08, 12, [0:0], "INVALID", "Dwell control"
dwellcont = bits, U08, 12, [0:0], "INVALID", "Dwell control"
useDwellLim= bits, U08, 12, [1:1], "Off", "On"
dwellcrank = scalar, U08, 13, "ms", 0.1, 0, 0, 25, 1
dwellrun = scalar, U08, 14, "ms", 0.1, 0, 0, 8, 1
numteeth = scalar, U08, 15, "teeth", 1.0, 0.0, 0.0, 255, 0
onetwo = scalar, U08, 16, "teeth", 1.0, 0.0, 0.0, 255, 0
dwellcrank = scalar, U08, 13, "ms", 0.1, 0, 0, 25, 1
dwellrun = scalar, U08, 14, "ms", 0.1, 0, 0, 8, 1
numteeth = scalar, U08, 15, "teeth", 1.0, 0.0, 0.0, 255, 0
onetwo = scalar, U08, 16, "teeth", 1.0, 0.0, 0.0, 255, 0
crankRPM = scalar, U08, 17, "rpm", 100, 0.0, 100, 1000, 0
tpsflood = scalar, U08, 18, "%", 1.0, 0.0, 0.0, 255.0, 0
crankRPM = scalar, U08, 17, "rpm", 100, 0.0, 100, 1000, 0
tpsflood = scalar, U08, 18, "%", 1.0, 0.0, 0.0, 255.0, 0
;Rev Limits
SoftRevLim = scalar, U08, 19, "rpm", 100, 0.0, 100, 25500, 0
SoftLimRetard = scalar, U08, 20, "deg", 1.0, 0.0, 0.0, 80, 0
SoftLimMax = scalar, U08, 21, "s", 0.1, 0.0, 0.0, 25.5, 1
HardRevLim = scalar, U08, 22, "rpm", 100, 0.0, 100, 25500, 0
SoftRevLim = scalar, U08, 19, "rpm", 100, 0.0, 100, 25500, 0
SoftLimRetard = scalar, U08, 20, "deg", 1.0, 0.0, 0.0, 80, 0
SoftLimMax = scalar, U08, 21, "s", 0.1, 0.0, 0.0, 25.5, 1
HardRevLim = scalar, U08, 22, "rpm", 100, 0.0, 100, 25500, 0
;TPS based acceleration enrichment
taeBins = array, U08, 23, [ 4], "%/s", 10.0, 0.00000, 0.00, 2550.0, 0
taeRates = array, U08, 27, [ 4], "%", 1.0, 0.00000, 0.00, 255.0, 0 ; 4 bytes
wueRates = array, U08, 31, [10], "C", 1.0, 0.0, 100.0, 255.0, 0
taeBins = array, U08, 23, [ 4], "%/s", 10.0, 0.0, 0.00, 2550.0, 0
taeRates = array, U08, 27, [ 4], "%", 1.0, 0.0, 0.00, 255.0, 0 ; 4 bytes
wueRates = array, U08, 31, [10], "C", 1.0, 0.0, 100.0, 255.0, 0
;Dwell config options
dwellLim = scalar, U08, 41, "ms", 1, 0, 0, 32, 0
dwellRates = array, U08, 42, [6], "%", 1.0, 0.0, 0.00, 255.0, 0
dwellLim = scalar, U08, 41, "ms", 1, 0, 0, 32, 0
dwellRates = array, U08, 42, [6], "%", 1.0, 0.0, 0.00, 255.0, 0
unused48 = scalar, U08, 48, "RPM", 100.0, 0.0, 100, 25500, 0
unused49 = scalar, U08, 49, "RPM", 100.0, 0.0, 100, 25500, 0
unused50 = scalar, U08, 50, "RPM", 100.0, 0.0, 100, 25500, 0
unused51 = scalar, U08, 51, "RPM", 100.0, 0.0, 100, 25500, 0
unused52 = scalar, U08, 52, "RPM", 100.0, 0.0, 100, 25500, 0
unused53 = scalar, U08, 53, "RPM", 100.0, 0.0, 100, 25500, 0
unused54 = scalar, U08, 54, "RPM", 100.0, 0.0, 100, 25500, 0
unused55 = scalar, U08, 55, "RPM", 100.0, 0.0, 100, 25500, 0
unused56 = scalar, U08, 56, "RPM", 100.0, 0.0, 100, 25500, 0
unused57 = scalar, U08, 57, "RPM", 100.0, 0.0, 100, 25500, 0
unused58 = scalar, U08, 58, "RPM", 100.0, 0.0, 100, 25500, 0
unused59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
unused48 = scalar, U08, 48, "RPM", 100.0, 0.0, 100, 25500, 0
unused49 = scalar, U08, 49, "RPM", 100.0, 0.0, 100, 25500, 0
unused50 = scalar, U08, 50, "RPM", 100.0, 0.0, 100, 25500, 0
unused51 = scalar, U08, 51, "RPM", 100.0, 0.0, 100, 25500, 0
unused52 = scalar, U08, 52, "RPM", 100.0, 0.0, 100, 25500, 0
unused53 = scalar, U08, 53, "RPM", 100.0, 0.0, 100, 25500, 0
unused54 = scalar, U08, 54, "RPM", 100.0, 0.0, 100, 25500, 0
unused55 = scalar, U08, 55, "RPM", 100.0, 0.0, 100, 25500, 0
unused56 = scalar, U08, 56, "RPM", 100.0, 0.0, 100, 25500, 0
unused57 = scalar, U08, 57, "RPM", 100.0, 0.0, 100, 25500, 0
unused58 = scalar, U08, 58, "RPM", 100.0, 0.0, 100, 25500, 0
unused59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
;--------------------------------------------------
@ -303,14 +303,22 @@ page = 6
injBatRates = array, U08, 21, [6], "%", 1, 0, 0, 255, 0 ;Values for injector pulsewidth vs voltage
airDenBins = array, U08, 27, [9], "C", 1.0, -40, -40, 215, 0 ; Bins for the air density correction curve
airDenRates = array, U08, 36, [9], "%", 1.0, 0.0, 0, 255, 0 ; Values for the air density correction curve
boostFreq = scalar, U08, 45, "Hz", 2.0, 0.0, 10, 511, 0
vvtFreq = scalar, U08, 46, "Hz", 2.0, 0.0, 10, 511, 0
idleFreq = scalar, U08, 47, "Hz", 2.0, 0.0, 10, 511, 0
unused48 = scalar, U08, 48, "RPM", 100.0, 0.0, 100, 25500, 0
unused49 = scalar, U08, 49, "RPM", 100.0, 0.0, 100, 25500, 0
unused50 = scalar, U08, 50, "RPM", 100.0, 0.0, 100, 25500, 0
unused51 = scalar, U08, 51, "RPM", 100.0, 0.0, 100, 25500, 0
unused52 = scalar, U08, 52, "RPM", 100.0, 0.0, 100, 25500, 0
; PWM Frequencies
boostFreq = scalar, U08, 45, "Hz", 2.0, 0.0, 10, 511, 0
vvtFreq = scalar, U08, 46, "Hz", 2.0, 0.0, 10, 511, 0
idleFreq = scalar, U08, 47, "Hz", 2.0, 0.0, 10, 511, 0
; Launch Control
launchPin = bits , U08, 48, [0:5], "Board Default", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30", "31", "32", "33", "34", "35", "36", "37", "38", "39", "40", "41", "42", "43", "44", "45", "46", "47", "48", "49", "50", "51", "52", "53", "54", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
launchEnable= bits, U08, 48, [6:6], "No", "Yes"
unused48h = bits, U08, 48, [7:7], "No", "Yes"
lnchSoftLim = scalar, U08, 49, "rpm", 100, 0.0, 100, 25500, 0
lnchRetard = scalar, U08, 50, "deg", 1.0, 0.0, 0.0, 80, 0
lnchHardLim = scalar, U08, 51, "rpm", 100, 0.0, 100, 25500, 0
lnchFuelAdd = scalar, U08, 52, "%", 1.0, 0.0, 0.0, 80, 0
unused53 = scalar, U08, 53, "RPM", 100.0, 0.0, 100, 25500, 0
unused54 = scalar, U08, 54, "RPM", 100.0, 0.0, 100, 25500, 0
unused55 = scalar, U08, 55, "RPM", 100.0, 0.0, 100, 25500, 0
@ -364,6 +372,11 @@ page = 7
fanSP = scalar, U08, 57, "°F", 1.0, -40, -40, 215.0, 0
fanHyster = scalar, U08, 58, "°F", 1.0, -40, -40, 215.0, 0
#endif
unused59 = scalar, U08, 59, "RPM", 100.0, 0.0, 100, 25500, 0
unused60 = scalar, U08, 60, "RPM", 100.0, 0.0, 100, 25500, 0
unused61 = scalar, U08, 61, "RPM", 100.0, 0.0, 100, 25500, 0
unused62 = scalar, U08, 62, "RPM", 100.0, 0.0, 100, 25500, 0
unused63 = scalar, U08, 63, "RPM", 100.0, 0.0, 100, 25500, 0
;--------------------------------------------------
;Boost and vvt maps (Page 8)
@ -471,6 +484,7 @@ page = 8
menu = "&Accessories"
subMenu = fanSettings, "Thermo Fan"
subMenu = LaunchControl, "Launch Control"
subMenu = std_separator
subMenu = boostSettings, "Boost Control"
subMenu = boostTbl, "Boost duty cycle", 8, { boostEnabled }
@ -525,6 +539,7 @@ page = 8
dialog = engine_constants_south
field = "Injector Timing", injTiming, { nCylinders <= 4 }
field = "Board Layout", pinLayout
field = "MAP Sample method", mapSample
dialog = engine_constants, ""
panel = std_injection, North
@ -597,92 +612,93 @@ page = 8
panel = stepper_idle
dialog = crankPW, "Cranking Pulsewidths (ms)"
#if CELSIUS
field = "Cranking RPM (Max)", crankRPM
field = "Flood Clear level", tpsflood
field = ""
field = "Priming Pulsewidth", primePulse
field = "Pulsewidth at -40°C", crankCold
field = "Pulsewidth at 77°C", crankHot
field = ""
field = "Cranking Enrichment %", crankingPct
#else
field = "Cranking RPM (Max)", crankRPM
field = "Flood Clear level", tpsflood
field = ""
field = "Priming Pulsewidth", primePulse
field = "Pulsewidth at -40°F", crankCold
field = "Pulsewidth at 170°F", crankHot
field = ""
field = "Cranking Enrichment %", crankingPct
#endif
dialog = crankPW, "Cranking Pulsewidths (ms)"
#if CELSIUS
field = "Cranking RPM (Max)", crankRPM
field = "Flood Clear level", tpsflood
field = ""
field = "Priming Pulsewidth", primePulse
field = "Pulsewidth at -40°C", crankCold
field = "Pulsewidth at 77°C", crankHot
field = ""
field = "Cranking Enrichment %", crankingPct
#else
field = "Cranking RPM (Max)", crankRPM
field = "Flood Clear level", tpsflood
field = ""
field = "Priming Pulsewidth", primePulse
field = "Pulsewidth at -40°F", crankCold
field = "Pulsewidth at 170°F", crankHot
field = ""
field = "Cranking Enrichment %", crankingPct
#endif
dialog = aseSettings, "Afterstart Enrichment"
field = "Enrichment %", asePct
field = "Number of Sec to run", aseCount
dialog = aseSettings, "Afterstart Enrichment"
field = "Enrichment %", asePct
field = "Number of Sec to run", aseCount
;dialog = egoSettings, "Exhaust Gas Oxygen"
;field = "EGO Sensor Type", egoType
;field = "EGO Switch Point (v)", egoSwitch
;field = "Coolant Temp Activation", egoTemp
;field = "Ignition Events Per Step", egoCount
;field = "EGO Step", egoDelta
;field = "EGO ± Limit", egoLimit
;field = "EGO Active Above", egoRPM
dialog = triggerSettings,"Trigger Settings",4
topicHelp = Shelp3
field = "Trigger Pattern", TrigPattern
field = "Primary base teeth", numteeth, { TrigPattern == 0 || TrigPattern == 2 }
field = "Primary trigger speed", TrigSpeed, { TrigPattern == 0 }
field = "Missing teeth", onetwo, { TrigPattern == 0 }
field = "Secondary teeth", onetwo, { TrigPattern == 2 }
field = "Trigger Angle ", TrigAng
field = "This number represents the angle ATDC when "
field = "tooth #1 passes the primary sensor."
field = ""
field = "Skip Revolutions", StgCycles
field = "Note: This is the number of revolutions that will be skipped during"
field = "cranking before the injectors and coils are fired"
field = "Trigger edge", TrigEdge
dialog = triggerSettings,"Trigger Settings",4
topicHelp = Shelp3
field = "Trigger Pattern", TrigPattern
field = "Primary base teeth", numteeth, { TrigPattern == 0 || TrigPattern == 2 }
field = "Primary trigger speed", TrigSpeed, { TrigPattern == 0 }
field = "Missing teeth", onetwo, { TrigPattern == 0 }
field = "Secondary teeth", onetwo, { TrigPattern == 2 }
field = "Trigger Angle ", TrigAng
field = "This number represents the angle ATDC when "
field = "tooth #1 passes the primary sensor."
field = ""
field = "Skip Revolutions", StgCycles
field = "Note: This is the number of revolutions that will be skipped during"
field = "cranking before the injectors and coils are fired"
field = "Trigger edge", TrigEdge
dialog = sparkSettings,"Spark Settings",4
topicHelp = Shelp3
field = "Cranking advance Angle", CrankAng
;field = "Hold Ignition", IgHold
field = "Spark Outputs triggers", IgInv
field = ""
field = "Fixed Angle (0 = use map)", FixAng
;field = "Trim Angle", Trim
dialog = sparkSettings,"Spark Settings",4
topicHelp = Shelp3
field = "Cranking advance Angle", CrankAng
;field = "Hold Ignition", IgHold
field = "Spark Outputs triggers", IgInv
field = ""
field = "Fixed Angle (0 = use map)", FixAng
;field = "Trim Angle", Trim
dialog = dwellSettings, "Dwell Settings", 4
topicHelp = DwellHelp
field = "Dwell control", dwellcont
field = "Or:"
field = " Cranking dwell", dwellcrank, { dwellcont }
field = " Running dwell", dwellrun, { dwellcont }
;field = "Minimum discharge period", mindischg, { dwellcont }
field = ""
field = "#Note"
field = "The above times are for 12V. Voltage correction"
field = "is applied. At higher voltages the time is reduced"
field = "and when low it is increased"
field = ""
field = "Overdwell protection"
field = "Use Overdwell protection", useDwellLim
field = "Max dwell time", dwellLim, { useDwellLim }
field = "Note: Set the maximum dwell time at least 3ms above"
field = "your desired dwell time (Including cranking)"
topicHelp = DwellHelp
field = "Dwell control", dwellcont
field = "Or:"
field = " Cranking dwell", dwellcrank, { dwellcont }
field = " Running dwell", dwellrun, { dwellcont }
;field = "Minimum discharge period", mindischg, { dwellcont }
field = ""
field = "#Note"
field = "The above times are for 12V. Voltage correction"
field = "is applied. At higher voltages the time is reduced"
field = "and when low it is increased"
field = ""
field = "Overdwell protection"
field = "Use Overdwell protection", useDwellLim
field = "Max dwell time", dwellLim, { useDwellLim }
field = "Note: Set the maximum dwell time at least 3ms above"
field = "your desired dwell time (Including cranking)"
dialog = RevLimiterS, "Rev Limiter", 4
topicHelp = Fhelp7
field = "Rev Limiter"
field = "Soft rev limit", SoftRevLim
field = "Soft limit absolute timing", SoftLimRetard
field = "Soft limit max time", SoftLimMax
field = "Hard Rev limit", HardRevLim
topicHelp = Fhelp7
field = "Rev Limiter"
field = "Soft rev limit", SoftRevLim
field = "Soft limit absolute timing", SoftLimRetard
field = "Soft limit max time", SoftLimMax
field = "Hard Rev limit", HardRevLim
dialog = LaunchControl, "Launch Control", 6
topicHelp = Fhelp7
field = "Launch Control"
field = "Enable Launch", launchEnable
field = "Launch Input Pin", launchPin, { launchEnable }
field = "Soft rev limit", lnchSoftLim, { launchEnable }
field = "Soft limit absolute timing", lnchRetard, { launchEnable }
field = "Hard rev limit", lnchHardLim, { launchEnable }
field = "Fuel adder during launch", lnchFuelAdd, { launchEnable }
dialog = OLED, "OLED Display", 2
field = "Display Type", display

BIN
reference/wiki/v0_4_board_annotated_1.jpg Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 459 KiB

58
speeduino.ino
View File

@ -83,8 +83,11 @@ byte o2CalibrationTable[CALIBRATION_TABLE_SIZE];
unsigned long counter;
unsigned long currentLoopTime; //The time the current loop started (uS)
unsigned long previousLoopTime; //The time the previous loop started (uS)
unsigned long scheduleStart;
unsigned long scheduleEnd;
unsigned long MAPrunningValue; //Used for tracking either the total of all MAP readings in this cycle (Event average) or the lowest value detected in this cycle (event minimum)
unsigned int MAPcount; //Number of samples taken in the current MAP cycle
byte MAPcurRev = 0; //Tracks which revolution we're sampling on
byte coilHIGH = HIGH;
byte coilLOW = LOW;
@ -493,9 +496,51 @@ void loop()
//***SET STATUSES***
//-----------------------------------------------------------------------------------------------------
//currentStatus.MAP = map(analogRead(pinMAP), 0, 1023, 10, 255); //Get the current MAP value
currentStatus.mapADC = analogRead(pinMAP);
currentStatus.MAP = map(currentStatus.mapADC, 0, 1023, configPage1.mapMin, configPage1.mapMax); //Get the current MAP value
//MAP Sampling system
switch(configPage1.mapSample)
{
case 0:
//Instantaneous MAP readings
currentStatus.mapADC = analogRead(pinMAP);
currentStatus.MAP = map(currentStatus.mapADC, 0, 1023, configPage1.mapMin, configPage1.mapMax); //Get the current MAP value
break;
case 1:
//Average of a cycle
if( (MAPcurRev == startRevolutions) || (MAPcurRev == startRevolutions+1) ) //2 revolutions are looked at for 4 stroke. 2 stroke not currently catered for.
{
MAPrunningValue = MAPrunningValue + analogRead(pinMAP); //Add the current reading onto the total
MAPcount++;
}
else
{
//Reaching here means that the last cylce has completed and the MAP value should be calculated
currentStatus.mapADC = ldiv(MAPrunningValue, MAPcount).quot;
currentStatus.MAP = map(currentStatus.mapADC, 0, 1023, configPage1.mapMin, configPage1.mapMax); //Get the current MAP value
MAPcurRev = startRevolutions; //Reset the current rev count
MAPrunningValue = 0;
MAPcount = 0;
}
break;
case 2:
//Minimum reading in a cycle
if( (MAPcurRev == startRevolutions) || (MAPcurRev == startRevolutions+1) ) //2 revolutions are looked at for 4 stroke. 2 stroke not currently catered for.
{
int tempValue = analogRead(pinMAP);
if( tempValue < MAPrunningValue) { MAPrunningValue = tempValue; } //Check whether the current reading is lower than the running minimum
MAPcount++;
}
else
{
//Reaching here means that the last cylce has completed and the MAP value should be calculated
currentStatus.mapADC = MAPrunningValue;
currentStatus.MAP = map(currentStatus.mapADC, 0, 1023, configPage1.mapMin, configPage1.mapMax); //Get the current MAP value
MAPcurRev = startRevolutions; //Reset the current rev count
MAPrunningValue = 1023; //Reset the latest value so the next reading will always be lower
}
break;
}
//TPS setting to be performed every 32 loops (any faster and it can upset the TPSdot sampling time)
if ((mainLoopCount & 31) == 1)
@ -820,7 +865,7 @@ void loop()
if( tempCrankAngle < 0) { tempCrankAngle += 360; }
tempStartAngle = ignition2StartAngle - channel2IgnDegrees;
if ( tempStartAngle < 0) { tempStartAngle += 360; }
if (tempStartAngle > tempCrankAngle)
if ( (tempStartAngle > tempCrankAngle) && ign2LastRev != startRevolutions)
{
setIgnitionSchedule2(beginCoil2Charge,
((unsigned long)(tempStartAngle - tempCrankAngle) * (unsigned long)timePerDegree),
@ -895,6 +940,5 @@ void openInjector1and4() { digitalWrite(pinInjector1, HIGH); digitalWrite(pinInj
void closeInjector1and4() { digitalWrite(pinInjector1, LOW); digitalWrite(pinInjector4, LOW);BIT_CLEAR(currentStatus.squirt, 0); }
void openInjector2and3() { digitalWrite(pinInjector2, HIGH); digitalWrite(pinInjector3, HIGH); BIT_SET(currentStatus.squirt, 1); }
void closeInjector2and3() { digitalWrite(pinInjector2, LOW); digitalWrite(pinInjector3, LOW); BIT_CLEAR(currentStatus.squirt, 1); }