New sketch for a basic arduino stim

reference/stim/stim.ino

@@ -0,0 +1,94 @@
+/* FORD 1996 CKP crank signal simulator 36-1
+ by Ichabod mudd 
+ */
+#include "Arduino.h"
+#define PULSE_PIN 10
+#define CAM_PIN  8
+#define MPH_PIN 12
+#define POT_PIN 0
+
+#define PULSE_DURATION 20
+
+int mph_toggle = 1 ;
+int val;
+unsigned int pulse_gap;
+
+// the setup routine runs once when you press reset:
+void setup() 
+{
+  pinMode(PULSE_PIN, OUTPUT);
+  pinMode(CAM_PIN, OUTPUT);
+  pinMode(MPH_PIN, OUTPUT);
+}
+
+
+//reluctor wheel
+// subroutines first
+
+//function to first go HiGH
+
+void triggerHigh(int duration, int count)
+{
+switch (count)
+{
+  case 1:  // cam CMP pin 8
+digitalWrite(CAM_PIN, HIGH);
+break;
+  case 2:
+digitalWrite(CAM_PIN, LOW);
+digitalWrite(MPH_PIN, LOW); //VSS
+break;
+   
+  case 12:
+digitalWrite(CAM_PIN, HIGH);
+break;
+  case 13:
+digitalWrite(CAM_PIN, LOW);
+break;
+  case 24:
+digitalWrite(CAM_PIN, HIGH);
+break;
+  case 25:
+digitalWrite(CAM_PIN, LOW);
+break;
+} // end cases
+
+
+  //hold CKP PIN high for this delay.
+  digitalWrite(PULSE_PIN, HIGH);
+  delayMicroseconds(PULSE_DURATION);
+  // now CKP go low
+  digitalWrite(PULSE_PIN, LOW);
+  // end function
+}
+
+
+//Simulates a 36 tooth reluctor wheel
+//with a  1 tooth reference
+
+// begin main loop program section
+void loop()
+{
+  // read potentiometer wiper pin 0?
+  // analog A/D channel 0 
+  val = analogRead(POT_PIN);
+  pulse_gap = map(val, 0, 1023, 500, 50000);
+  // for loop 36 counts  , 150 uS to 1000 uS or  5000 to 800 rpm
+  for (int i = 0; i < 11; i++) 
+  {
+    // go high then low , in Symmetry
+      digitalWrite(PULSE_PIN, HIGH);
+      delayMicroseconds(PULSE_DURATION);
+      digitalWrite(PULSE_PIN, LOW);
+      delayMicroseconds( (pulse_gap - PULSE_DURATION) );
+  } 
+  // simulate the missing tooth next
+  delayMicroseconds( (pulse_gap - PULSE_DURATION) );
+
+  } 
+// end main loop  version 7 , now perfect  800 rpm to 5000
+// added cam pulse 7/4/2013  
+// using Delay calls, suck but , this is easy.
+// the switch case trick, gets the cam sensor working.
+// the engine fires every 120 degr. on crank, 12 teeth, and 10 degr per tooth=120
+// added MPH pin, for VSS signals to ECU