Add Plazomat 0.1 mapping

globals.h

@@ -273,6 +273,12 @@ byte pinBat; //O2 Sensor pin
 byte pinDisplayReset; // OLED reset pin
 byte pinSpareTemp1; // Future use only
 byte pinSpareTemp2; // Future use only
+byte pinSpareOut1; //Generic output
+byte pinSpareOut2; //Generic output
+byte pinSpareOut3; //Generic output
+byte pinSpareOut4; //Generic output
+byte pinSpareOut5; //Generic output
+byte pinSpareOut6; //Generic output
 
 // global variables // from speeduino.ino
 extern struct statuses currentStatus; // from speeduino.ino

reference/speeduino.ini

@@ -91,7 +91,7 @@ page = 1
       aseCount   = scalar, U08,      83,         "s",        1.0,       0.0,   0.0,    255,       0
       wueBins    = array,  U08,      84, [  10], "%",        1.0,       0.0,   0.0,    255,       0
       crankingPct= scalar, U08,      94,         "%",        1.0,       0.0,   0.0,    255,       0
-      pinLayout  = bits,   U08,      95, [0:7],  "Speeduino v0.1", "Speeduino v0.2", "Speeduino v0.3", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Turtana PCB", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
+      pinLayout  = bits,   U08,      95, [0:7],  "Speeduino v0.1", "Speeduino v0.2", "Speeduino v0.3", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Turtana PCB", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "Plazomat I/O 0.1", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID", "INVALID"
       unused96   = scalar, U08,      96,         "ms",       0.1,       0.0,   0.0,    25.5,      1
       unused97   = scalar, U08,      97,         "ms",       0.1,       0.0,   0.0,    25.5,      1
       taeColdA   = scalar, U08,      98,         "ms",       0.1,       0.0,   0.0,    25.5,      1

utils.ino

@@ -100,6 +100,33 @@ void setPinMapping(byte boardID)
       pinSpareTemp2 = A5;
       break;
       
+     case 20:
+      //Pin mappings as per the Plazomat In/Out shields Rev 0.1
+      pinInjector1 = 8; //Output pin injector 1 is on
+      pinInjector2 = 9; //Output pin injector 2 is on
+      pinInjector3 = 10; //Output pin injector 3 is on
+      pinInjector4 = 11; //Output pin injector 4 is on
+      pinCoil1 = 28; //Pin for coil 1
+      pinCoil2 = 24; //Pin for coil 2
+      pinCoil3 = 40; //Pin for coil 3
+      pinCoil4 = 36; //Pin for coil 4
+      pinSpareOut1 = 4; //Spare LSD Output 1(PWM)
+      pinSpareOut2 = 5; //Spare LSD Output 2(PWM)
+      pinSpareOut3 = 6; //Spare LSD Output 3(PWM)
+      pinSpareOut4 = 7; //Spare LSD Output 4(PWM)
+      pinSpareOut5 = 50; //Spare LSD Output 5(digital)
+      pinSpareOut6 = 52; //Spare LSD Output 6(digital)
+      pinTrigger = 20; //The CAS pin
+      pinTrigger2 = 21; //The Cam Sensor pin
+      pinSpareTemp2 = A15; //spare Analog input 2
+      pinSpareTemp1 = A14; //spare Analog input 1
+      pinO2 = A8; //O2 Sensor pin
+      pinBat = A4; //Battery reference voltage pin
+      pinMAP = A3; //MAP sensor pin
+      pinTPS = A2;//TPS input pin
+      pinCLT = A1; //CLS sensor pin
+      pinIAT = A0; //IAT sensor pin
+      
     default:
       //Pin mappings as per the v0.2 shield
       pinInjector1 = 8; //Output pin injector 1 is on