* New README format
* Update README.md
* STM32F407 fixes (#338)
* Correct overflow for 32bit timers
* fix pins PA0-PA5 on some f407 boards
* Enable access to SRAM Backup domain at boot
* Add missing callback functions
* Change timer resolutions. Corrects idle/aux timer frequencies
* 32 bit overflow only for STM32F4
* Check and update ignition count target before checking other conditions to avoid peramently disabling ego correction in case ignition count rolls over while ego correction is disabled. (#344)
Co-authored-by: bera-n <notrevealedbera-n@gmail.com>
Fixes#343
* Setup memory for vss
* Update all dialog help links to the new wiki
* [DFCO] Add a minimum coolant (#353)
* [DFCO] Add a minimum coolant
On pure ethanol or E85 the engine need a lot fuel to return from DFCO when cold.
Add a minimum temp
Fixes copy-paste error
Fix sign error
* Add signed cast on the calibration offset
Co-authored-by: Josh Stewart <josh@noisymime.org>
* AE cold temp correction
Added possibility to increase AE amount on cold engine. Max cold modifier is tapered with clt.
* Added help texts and value limitation in speeduino.ini and overflow prevention in corrections.ino
* Terminology patch
* Unsigned long in calculation isn't really needed as AE max setting is 255 (+100). Changed to uint16_t.
* Comment revision for the previous
* Updated function description
* Fixes to make correction equal in MAP and TPS modes
* AE cold temp correction
Added possibility to increase AE amount on cold engine. Max cold modifier is tapered with clt.
* Added help texts and value limitation in speeduino.ini and overflow prevention in corrections.ino
* Terminology patch
* Unsigned long in calculation isn't really needed as AE max setting is 255 (+100). Changed to uint16_t.
* Comment revision for the previous
* Updated function description
* Fixes to make correction equal in MAP and TPS modes
Co-authored-by: Josh Stewart <josh@noisymime.org>
Co-authored-by: iLeeeZi <ilari.vehniainen@hotmail.fi>
Co-authored-by: bera-n <bjorn.nyhlen@gmail.com>
Co-authored-by: Vitor Moreno B. Sales <vitor_boss@yahoo.com.br>
* [DFCO] Include a delay
* [DFCO] Fix - delay isn't working if conditions aren't met immidiatly
Co-Authored-By: muuris <55035659+muuris@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
Co-authored-by: muuris <55035659+muuris@users.noreply.github.com>
It's already with this higher resolution in TS, and tuning idle and low load area with big injectors really require more than just one decimal precision.
* [DFCO] Add a minimum coolant
On pure ethanol or E85 the engine need a lot fuel to return from DFCO when cold.
Add a minimum temp
Fixes copy-paste error
Fix sign error
* Add signed cast on the calibration offset
Co-authored-by: Josh Stewart <josh@noisymime.org>
* 6 cyl sequential related cleanup
* disable 6cyl seq fuel trim tables for now
* add the over 2 squirts fix
* Add 5 and 6 cylinder semi and full sequential
* 5 cylinder changes
* fix priming pulse when using paired or semi-sequential injection
* add 5 cyl special case back
* Add missing 8 cyl stuff
* add missing PW8
* allow to change inj4Ang with non sequential 5 cylinder
* add missing helptext
* First commit
Increases cranking enrichment range from 0..255% to 0..1275%, accuracy is reduced to 5% steps but this should be enough.
Max allowable gammae increased from 511% to 1500%, overflow in PW-function prevented.
* Last one missed the second overflow prevention (less bitshift)
* Version needs to be increased in order to avoid performing value update routine on every startup
* Less bitshift is required only on iCorrections
celso acyr
Josh Stewart
Antti Muurikainen
Vitor Moreno B. Sales
iLeeeZi
Pasi Kemppainen
Bruno Bousquet