This adds a decoder for the Ford ST170 engine.
This setup uses a 36-1 primary and a unique 8-3 secondary trigger.
The existing missing tooth deooder with fixed parameters is used as the primary to reduce duplication.
* Pin definition for the Juice Box board
Ignition-only user board
* Update platformio.ini
Formatting corrections.
* Added JUICEBOX user board
User board and pin mappings
* Updated platformio.ini to reflect noisymime
* Add platformio.ini to gitignore
* Updated pin mappings
Pin mappings updated. Serial 2 now working
* Removed platformio.ini
* Match noisymime version
* Match noisymime version (2nd attempt)
* Update speeduino.ini
Match noisymime version to allow merge.
* JuiceBox pin layout added back in
preventing the value sent from TS to the firmware from being zero when
a value of 1 is selected in the dropdown. Note the original change
set the minimum value to 1; this has been retained.
Co-authored-by: Richard Metcalfe <richard@richmet.com>
* STM32 jump to DFU
This enable jumping to hardware bootloader with software command.
Based on @iLeeeZi previous work.
Co-Authored-By: iLeeeZi <3372213+iLeeeZi@users.noreply.github.com>
Co-Authored-By: Pasi Kemppainen <48950874+pazi88@users.noreply.github.com>
* lowercase functions fixes
Co-authored-by: iLeeeZi <3372213+iLeeeZi@users.noreply.github.com>
Co-authored-by: Pasi Kemppainen <48950874+pazi88@users.noreply.github.com>
* Added pinIsReserved macro
Function used to don't initialize reserved pins such as USB on ARM boards, each pin must be defined on board.h file
* Update board_teensy35.h
Include Serial and CAN0 pins
* Squashed commit of the following:
commit c73f316fa5bf8c929a8fef5736f4a40045ea992f
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Wed Nov 25 21:53:45 2020 +0100
cleanup and fix merge issues
commit 57f1e8c6c73bcfb699b18ac51a2ec646be822f55
Merge: 04478ca 131673d
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Wed Nov 25 18:59:58 2020 +0100
Merge branch 'Closedloop_idle_improvements' into ClosedLoopIdleImprovement
commit 131673dc60417cbc773b0763d2f93e917c83325f
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Sun Nov 22 21:54:03 2020 +0100
more fiddeling with idle control
commit e4406166cde91552027a0dfb7958d6894098f066
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Sun Nov 22 20:36:24 2020 +0100
More fiddeling with idle control
commit 45822003d41e021e3ed93e8e14ce05479ddfd17b
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Sat Nov 21 14:59:32 2020 +0100
fix initial value
commit ff8fadae7844bd8e5934ee0f311fbf5e0842ec29
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Thu Nov 19 23:14:14 2020 +0100
add TPS limit to prevent integeral windup.
commit 7683b2e65569787b1c94eae6f4847cdadd394402
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Thu Nov 19 22:40:53 2020 +0100
cleanup idle.h
commit da55ee9dbd76d65608bfb5b950bc948a498b9599
Author: Tjeerd <tjeerdie@users.noreply.github.com>
Date: Thu Nov 19 22:36:18 2020 +0100
Further improvement simplifying code for closedloop PID control with feedforward.
make PWM output work
Tinkering new Idle control
working on closedloop idle
Initial work on improving closed loop Idle control
* reset platformio.ini
Co-authored-by: Tjeerd <tjeerdie@users.noreply.github.com>
Implement functionality to allow a defined output pin to toggle (normal or inverted) based on the idle up input pin.
Co-authored-by: Josh Stewart <josh@noisymime.org>
changed the numbers for the secondDataInBits. This fixed issue #464 where the second condition for rule number 1 was being used to evaluate rule number 2 of the programmable outputs.
Josh Stewart
DIY-EFI
Pasi Kemppainen
Daniel Tobias
Vitor Moreno B. Sales
Joe Mann
ric355
Piotr Rogowski
celso acyr
Tjeerd
henriquebelaz
sandmanWAjeep