* Add config error indicator
* Fixes and naming change
* Fixes
* Change to fix conflicting error bit flag in init
* Updating IO flag setting
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Programmable outputs
* Prevent array overflow
* Show fullStatus variables names on dialog
* Further fixes
* Update with master
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Fix building for FRAM with globals.h setting
On request of vitor boss. A lot has been changed around to make the selection of EEPROM emulation type from the globals.h (including FRAM selection)
* Add support for EEPROM emulation on internal flash of STM32F7
* Updates on SPI Flash EEPROM
* Fix building for BACKUPSRAM as EEPROM.
* Add put() and get() functions to the EEPROM emulation. This is needed for the latest terminstor and other calibrations routines
Co-authored-by: Tjeerd <tjeerdie@users.noreply.github.com>
* Iac automatic resolution
Fix idle stepper, work direct with values < 255 and keep existing mode
* Fixed Hysteresis for stepper
0 value bug the counter.
* Fix value
Changed value to 255.
* Ensure no overflow on iacMaxSteps
Co-authored-by: Josh Stewart <josh@noisymime.org>
* Half sync indicator for 3 different trigger patterns.
Added half sync indicator which shows that there is only primary trigger present for missing tooth, dual wheel and miata 9905 trigger patterns
* missing tooth required some adjusting
* forgot to remove stm32 pin mapping. I have it in other PR
* Leave only for missing tooth
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
Co-authored-by: Josh Stewart <josh@noisymime.org>
* fix to serial0 and serial3 when offset is 0 uses wrong command
* fix to serial0 and serial3 when offset is 0 uses wrong command
* fix hex num
* add teensy canbus library
teensy can read and write functions enabled
* update to teensyduino 1.49
* part 1 prepare structure for obd can port works
rename old can_command() to secondarySerial_command() for secondary serial and create new can_command for real CAN instruction decode.
fix masking for teensy 3x and 4
* set mega as default build
* last part of main obd2 canbus for teensy MCU
* tested obd2 for teensy3.5
* Only init CAN on Teensy with 3.5. Otherwise this will lockup on 4.1
Co-authored-by: Josh Stewart <josh@noisymime.org>
* [VVT] PID work
Tested on a half moon CAM pattern as working, it should work on others too.
Added option to reverse the PWM output
Co-Authored-By: pazi88 <48950874+pazi88@users.noreply.github.com>
* Fix typo
Co-Authored-By: diy-efi <diy-efi@users.noreply.github.com>
* Add second VVT pwm on same timer
All precious VVT variables was renamed to VVT1 and added VVT2 stuff.
Tested with logic analyzer.
* Define VVT2 for other boards
Added vvt2Pin
* Just update on first tooth
Co-authored-by: pazi88 <48950874+pazi88@users.noreply.github.com>
Co-authored-by: diy-efi <diy-efi@users.noreply.github.com>
Pasi Kemppainen
iLeeeZi
Josh Stewart
Vitor Moreno B. Sales
Antti Muurikainen
Tjeerd
noisymime-test
celso acyr
Autohome2
Mateusz Muszyński