* Change "Aux in" 1-16 to 0-15 under prog outputs
Change "Aux in" 1-16 to 0-15 under "programmable outputs" menu to match the pin configuration page found under "local auxillary input channel configuration" menu.
* Update sensors.ino
* Update sensors.ino
* Match datalogging names to gauge names in ini
for ve/advance (current)
Co-authored-by: github-account-0 <91717711+github-account-0@users.noreply.github.com>
* Change "Aux in" 1-16 to 0-15 under prog outputs
Change "Aux in" 1-16 to 0-15 under "programmable outputs" menu to match the pin configuration page found under "local auxillary input channel configuration" menu.
* Update sensors.ino
* Update sensors.ino
Co-authored-by: github-account-0 <91717711+github-account-0@users.noreply.github.com>
* Coolant/RPM Protection
* removed test clear flash option
* Add new update section for coolantProtEnbl rather than using old area
Co-authored-by: Benas <bbrazdziunas@gavea.co.uk>
Co-authored-by: Josh Stewart <josh@noisymime.org>
The tableCrcCommand is used by TS to determine what calibrations (IAT, CLT and O2) are currently on the board. This is an optional command, however v3.1.07 unintentionally assumed it was implemented on all boards and gave a 'null' error if the command was not present.
This adds the command for all future versions, but previous releases will need to wait for theTS fix release
Update secondary tables to have tps * 2 in their lookup of fuelload2 and ignload2.
Dwell table and rotary split tables to match ignition load rather than fuelload.
* Increase TPS resolution to 0.5%
Fix TPS scale across the code
Fix TPS range for boost table
Update sensors.h
* Update all tables to use TPS resolution
* All tables use new TPS resolution
Fixed wrong MAP scale, added fuel switch % for TPS
Fix rotary
* Fix merge conflicts
* Boost by Gear
* Minor changes to PR
- Changed *2 into bitwise operator
- Reserved 1 extra bit for boostByGearEnabled for 2 additional boost by gear modes in the future
* Added mode to set percentage of boost target table
* Boost by Gear (Open loop)
Added Boost by Gear to open loop boost control
* Added PWM Fan functionality
PWM Fan output for Teensy and STM32
* Teensy3.5 timer fix for PWM Fan.
* Fix the conflicts with incorporate AFR
* Possibility to use PWM fan on mega too
Not tested at this stage!! Do not merge yet.
* Fix log entry size
* Remove duplicate stuff and use same way off toggling fan
* Fix typo errors
* Move fan pin definitions to globals.h
* Fix problems related to PWM fan.
* Revert previous change.
* Fix problems with idle things
* fix idle duty getting stuck at 100%
* Revert "fix idle duty getting stuck at 100%"
This reverts commit 7e9779483b.
* Revert "Fix problems with idle things"
This reverts commit 8bccb56d9a.
* Revert "Revert previous change."
This reverts commit fcb962864a.
* Remove mega support
* fixes
* more fixes
* moar fixes
* Should be working now
* Update speeduino.ini
* Lots of tweaking
* Update to work better with current FW
* Fix compiler warnings and include update things.
* Minor fixes
* Update logger.ino
* Fan duty working on mega too and fan output will be on/off
Co-authored-by: Pasi Kemppainen <pazi88@users.noreply.github.com>
* Signed int8 for fixed crank angle (range -10to80)
* Limit ignition advance in tables to 70 and use different range for multiplied
* Limit WMI and Nitrous ign adv to reasonable values
* Fix IAT timing retard table
* Don't let IAT retard correction set a fixed advance. No other correction does this and this fixed correction can be changed by other corrections. Also the current code is not working as ignition offset is not used for IAT retard.