.. |
src
|
Disable automatic retransmission (#910)
|
2022-08-10 11:06:28 +10:00 |
SD_logger.h
|
Sync SD log with card at 4Hz interval
|
2023-05-02 13:13:19 +10:00 |
SD_logger.ino
|
Sync SD log with card at 4Hz interval
|
2023-05-02 13:13:19 +10:00 |
TS_CommandButtonHandler.h
|
Refactor comms: save 130+ bytes RAM (#906)
|
2023-02-21 12:55:54 +11:00 |
TS_CommandButtonHandler.ino
|
VSS from Aux input (#710)
|
2023-05-03 15:23:49 +10:00 |
acc_mc33810.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
acc_mc33810.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
auxiliaries.h
|
Ensure that output port manipulations are done atomically. Fixes #972
|
2023-04-24 10:30:51 +10:00 |
auxiliaries.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
board_avr2560.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
board_avr2560.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
board_same51.h
|
Allow for float values in SD log where supported with FPU
|
2022-08-10 12:12:42 +10:00 |
board_same51.ino
|
fix typos in code documentation (#816)
|
2022-04-11 10:49:58 +10:00 |
board_stm32_generic.h
|
Allow for float values in SD log where supported with FPU
|
2022-08-10 12:12:42 +10:00 |
board_stm32_generic.ino
|
fix typos in code documentation (#816)
|
2022-04-11 10:49:58 +10:00 |
board_stm32_official.h
|
Allow for float values in SD log where supported with FPU
|
2022-08-10 12:12:42 +10:00 |
board_stm32_official.ino
|
Fix hanging on boot (#858)
|
2022-06-27 11:54:47 +10:00 |
board_teensy35.h
|
Allow for float values in SD log where supported with FPU
|
2022-08-10 12:12:42 +10:00 |
board_teensy35.ino
|
Add OLCL mode to initBoard() for teensy (#903)
|
2022-07-28 10:22:42 +10:00 |
board_teensy41.h
|
Set pin trigger hysteresis on T4.1
|
2023-04-08 08:36:14 +10:00 |
board_teensy41.ino
|
Set pin trigger hysteresis on T4.1
|
2023-04-08 08:36:14 +10:00 |
board_template.h
|
Allow for float values in SD log where supported with FPU
|
2022-08-10 12:12:42 +10:00 |
board_template.ino
|
fix typos in code documentation (#816)
|
2022-04-11 10:49:58 +10:00 |
canBroadcast.h
|
[WIP] CAN broadcasting menu (#639)
|
2022-04-21 16:33:10 +10:00 |
canBroadcast.ino
|
Enable Teensy 3.5 unit testing (#1038)
|
2023-04-26 15:54:15 +10:00 |
cancomms.h
|
Read analog values via CAN BUS (#635)
|
2023-05-03 15:12:29 +10:00 |
cancomms.ino
|
Read analog values via CAN BUS (#635)
|
2023-05-03 15:12:29 +10:00 |
comms.cpp
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
comms.h
|
Remove legacy comms option from TunerStudio. Add legacy comms lock
|
2023-04-26 13:45:22 +10:00 |
comms_legacy.cpp
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
comms_legacy.h
|
Refactor comms: save 130+ bytes RAM (#906)
|
2023-02-21 12:55:54 +11:00 |
comms_sd.h
|
Refactor comms: save 130+ bytes RAM (#906)
|
2023-02-21 12:55:54 +11:00 |
corrections.h
|
Small memory reduction in AE code
|
2022-11-07 14:49:49 +11:00 |
corrections.ino
|
Cranking add cold advance option (#872)
|
2023-05-10 10:32:11 +10:00 |
crankMaths.h
|
Change to single decoder state variable. Small (12 byte) RAM free up
|
2022-11-22 15:53:35 +11:00 |
crankMaths.ino
|
Change to single decoder state variable. Small (12 byte) RAM free up
|
2022-11-22 15:53:35 +11:00 |
decoders.h
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
decoders.ino
|
Allow use of RPM2 pin for VSS with Basic Distributor trigger
|
2023-05-17 08:46:20 +10:00 |
display.h
|
Move to PlatformIO for project layout
|
2017-02-06 20:56:46 +11:00 |
display.ino
|
fix typos in code documentation (#816)
|
2022-04-11 10:49:58 +10:00 |
engineProtection.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
engineProtection.ino
|
Fix unit tests following #939
|
2022-12-14 11:25:54 +00:00 |
errors.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
errors.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
globals.h
|
Add option to power stepper motor constantly. Fixes #1031
|
2023-05-17 08:17:26 +10:00 |
globals.ino
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
idle.h
|
Add option to power stepper motor constantly. Fixes #1031
|
2023-05-17 08:17:26 +10:00 |
idle.ino
|
Add option to power stepper motor constantly. Fixes #1031
|
2023-05-17 08:17:26 +10:00 |
init.h
|
Don't break VSS if using RPM2 pin and enable tooth or composite log
|
2023-05-17 11:25:50 +10:00 |
init.ino
|
Don't break VSS if using RPM2 pin and enable tooth or composite log
|
2023-05-17 11:25:50 +10:00 |
int16_byte.h
|
Include CPP files in MISRA script (#925)
|
2022-09-15 12:16:14 +10:00 |
logger.h
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
logger.ino
|
Don't break VSS if using RPM2 pin and enable tooth or composite log
|
2023-05-17 11:25:50 +10:00 |
maths.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
maths.ino
|
libdivide structs can be const - saves a few bytes (#886)
|
2022-07-27 13:51:45 +10:00 |
page_crc.cpp
|
Refactor comms: save 130+ bytes RAM (#906)
|
2023-02-21 12:55:54 +11:00 |
page_crc.h
|
Initial work on new serial comms (Disabled in ini)
|
2021-11-19 11:07:38 +11:00 |
pages.cpp
|
Table 3d: change X-axis orientation to match Y-axis (#771)
|
2022-11-14 10:26:14 +11:00 |
pages.h
|
Table 3d: change X-axis orientation to match Y-axis (#771)
|
2022-11-14 10:26:14 +11:00 |
rtc_common.h
|
Change name of rtc.h/.ino files to avoid conflict for stm32
|
2021-01-23 08:49:44 +11:00 |
rtc_common.ino
|
Fix hanging on boot (#858)
|
2022-06-27 11:54:47 +10:00 |
schedule_calcs.cpp
|
Unit test the schedule calculations (#1010)
|
2023-03-06 17:23:17 +11:00 |
schedule_calcs.h
|
Fixes for Arduino IDE (#1042)
|
2023-04-29 14:57:57 +10:00 |
schedule_calcs.hpp
|
Fixes for Arduino IDE (#1042)
|
2023-04-29 14:57:57 +10:00 |
scheduledIO.h
|
Additonal schedule initialization unit tests (#1046)
|
2023-05-15 15:16:41 +10:00 |
scheduledIO.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
scheduler.h
|
Cleanup warnings on non-AVR architectures (scheduler interrupts were not static)
|
2023-04-24 15:33:02 +10:00 |
scheduler.ino
|
Test start/end callback assignment (#1044)
|
2023-05-07 19:42:09 +10:00 |
secondaryTables.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
secondaryTables.ino
|
Fix for cranking and fixed timing not being applied when secondary spark table in use
|
2023-04-16 17:19:33 +10:00 |
sensors.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
sensors.ino
|
VSS from Aux input (#710)
|
2023-05-03 15:23:49 +10:00 |
speeduino.h
|
Unit test the schedule calculations (#1010)
|
2023-03-06 17:23:17 +11:00 |
speeduino.ino
|
VVT2 improved logging & setup (#1036)
|
2023-05-15 14:15:46 +10:00 |
storage.cpp
|
Add serial compatibility mode option
|
2023-03-23 11:05:10 +11:00 |
storage.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
table2d.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
table2d.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
table3d.cpp
|
Table 3d: change X-axis orientation to match Y-axis (#771)
|
2022-11-14 10:26:14 +11:00 |
table3d.h
|
Correct the get3DTableValue() return type. (#1007)
|
2023-02-14 07:43:45 +11:00 |
table3d_axes.h
|
Table3D: MISRA fixes (#973)
|
2023-01-11 10:58:48 +09:00 |
table3d_axis_io.cpp
|
Separate table axis I/O conversion from iteration (#767)
|
2022-02-24 16:11:54 +11:00 |
table3d_axis_io.h
|
Include CPP files in MISRA script (#925)
|
2022-09-15 12:16:14 +10:00 |
table3d_interpolate.cpp
|
Table 3d: change X-axis orientation to match Y-axis (#771)
|
2022-11-14 10:26:14 +11:00 |
table3d_interpolate.h
|
Table3D: MISRA fixes (#973)
|
2023-01-11 10:58:48 +09:00 |
table3d_typedefs.h
|
Table3D: MISRA fixes (#973)
|
2023-01-11 10:58:48 +09:00 |
table3d_values.h
|
Table3D: MISRA fixes (#973)
|
2023-01-11 10:58:48 +09:00 |
timers.h
|
Add Tacho Sweep function at startup (#935)
|
2023-01-11 14:27:16 +09:00 |
timers.ino
|
Add Tacho Sweep function at startup (#935)
|
2023-01-11 14:27:16 +09:00 |
updates.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
updates.ino
|
Add option to power stepper motor constantly. Fixes #1031
|
2023-05-17 08:17:26 +10:00 |
utilities.h
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |
utilities.ino
|
MISRA cleanup rule: misra-c2012-8.2
|
2022-11-06 09:43:29 +11:00 |